Elegant wood design with stainless steel handles.  HAS DESIRED DEMINSIONS

No Rating

Product Version: Unknown

2181 Downloads

This steel d/door is fully parametric including mesh and threshold and L steel angle. You may change profile to suite your need.

No Rating

Product Version: Revit Architecture 2016

5979 Downloads

Product Version: Revit Architecture 2010

2625 Downloads

Cocktail Table on Steel Frame

No Rating

Product Version: Unknown

4828 Downloads

The Automatic Control Valve shall be a Ductile Iron Body and Cover design. The Valve shall have a resilient seal disc, guided top and bottom; Bottom guide will be vanes, sliding in a stainless steel seat arrangement, single seated line pressure operated, diaphragm actuated, pilot controlled, valve. The valve shall seal by means of a stainless steel seat. All parts are to be replaceable in the field without removing the valve from the line. All flange dimensions including face to face lengths shall conform to ISO Standards.

Product Version: Unknown

1192 Downloads

One piece curved laminated timber seat and back with stainless steel legs

Product Version: Revit Architecture 2009

6061 Downloads

steel pridge..unlocked file :)

Product Version: Revit Architecture 2012

6377 Downloads

steel pridge..unlocked file :)

Product Version: Revit Architecture 2012

3807 Downloads

True  Double unit,  stainless steel

No Rating

Product Version: Unknown

756 Downloads

Sloping glcursecanopy with stainless steel supports and rubber gromits

Product Version: Unknown

10297 Downloads

A stainless steel refridgerator with a television mounted in the door.

Product Version: Unknown

15136 Downloads

This is a custom built pot with a 6" diameter. Stainless steel with copper bottom.

No Rating

Product Version: Revit Architecture 2011

5529 Downloads

This is a custom built pan that has a 10" diameter. Stainless steel with copper bottom.

No Rating

Product Version: Revit Architecture 2011

11491 Downloads

This is a custom built pot that has a 10" diameter. Stainless steel with copper bottom.

Product Version: Revit Architecture 2011

10251 Downloads

Here is a Fridge Freezer I have modelled based on the Hotpoint fridge freezer (link below)

The fridge itself is fixed in size but if you wish to added dimension parameters to it then please do so.

The materials are all changable parameters.

http://www.currys.co.uk/gbuk/household-appliances/refrigeration/fridge-freezers/hotpoint-ffu4dx-fridge-freezer-stainless-steel-17152055-pdt.html

Size is 1950H x 700W x 760D mm

Enjoy and feedback is always welcome....

Product Version: Revit MEP 2014

59149 Downloads

This is based on Great Openings Trace Series steel bookcases. Other manufacturers dimensions can differ. 

Product Version: Revit Architecture 2016

1967 Downloads

MIFAB® Series F1840 lacquered cast iron planting area drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, stainless steel ballast guard, and standard 1” (25) thick, 9” (229) round, (specify material finish) tractor grate.

No Rating

Product Version: Unknown

16 Downloads

Morning guys, heres a quick Modern Glass dining table.

This is parametric in length and width, and has 3 materials families, 2 glass and the steel feet/main support.

Hope you guys like it and it comes in useful for you on your projects.

Have a good week

Product Version: Revit MEP 2014

10046 Downloads

Stainless stell bar shelf ikea

Product Version: Revit Architecture 2009

4143 Downloads

Double assymetrical undermount rectangular kitchen Sink stainless

Not sure Revit version, created in Inventor.

No Rating

Product Version: Unknown

5166 Downloads

A parametric steel stair tread family. Completely parametric. Adjusts depth of bearing bars automatically depending on span. Accurate hole spacing on end plates which also adjust with span. Bent checker plate or cast abrasive nosings as options. Based on Borden steel stair treads. Revit 2012.

Product Version: Revit Structure 2012

8098 Downloads

REVISED STEEL TRUSS CORRECTING ERRORS IN PREVIOUS VERSION

Product Version: Unknown

18557 Downloads

Nice modern Dining Table and chairs set.

The tables parameteric in length and width, aalong with 2 material parameters for steel and glass materials.

I've modelled the chairs seperate and these too have there own material parameters.

Enjoy guys

Product Version: Revit MEP 2014

43701 Downloads

MIFAB® Series MI-HUB (specify size) shielded no hub couplings are manufactured with gaskets made with neoprene that meets the requirements of ASTM C-564 housed inside a Type 301 stainless steel corrugated shield. Two (2” through 4” size), four (6” through 10” size) or six (12” sizes) Type 301 stainless steel clamps tightened with 5/16” Type 305 stainless steel hex head screws surround the shield to provide the sealing force. MI-HUB Series Couplings are tested and certified to the ASTM-C1277-2018, CISPI 310-2010, CSA B602-2010 (File # 247608) and B70 Standards. They are listed with IAPMO and NSF certified CISPI 310. Also tested and certified by Intertek Testing Services to CAN/ULC S102.2-07 “Smoke Test.”

No Rating

Product Version: Unknown

21 Downloads

Wall Cleanout with Brass Plug, Stainless Steel Cover

No Rating

Product Version: Revit Structure 2014

109 Downloads

9"-15"-6" (Editable)

Stainless Steel

No Rating

Product Version: Unknown

2850 Downloads

• Made from Wood


• Handles made from stainless steel


• Dimension:  15 1/2 X 60L X 56 1/2H inches

No Rating

Product Version: Revit Architecture 2010

1222 Downloads

Standard letterbox with brass body and polished stainless steel letter flap.

No Rating

Product Version: Revit Architecture 2017

336 Downloads

Stainless steel wine cooler with glass door and black trims

24"W, 24"D, 34.5"H 

Product Version: Revit Architecture 2012

27836 Downloads

A stainless steel teapot i copied off the one i have at home, "AVANTI" Brand.

Product Version: Revit MEP 2009

3578 Downloads