Series FD-860 epoxy coated cast iron planting area drain with membrane clamp, self-locking dome with stainless steel mesh, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

237 Downloads

Series FD-870 epoxy coated cast iron planting area drain with membrane clamp, self-locking dome with stainless steel mesh, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

214 Downloads

Morning chaps

Yep, another coffee table for you to feast your eyes on.

Parametric materials and also length and width of table. The Wood middle has its own parameter so you can change its width.

hope it comes in useful

Enjoy peeps

Product Version: Revit MEP 2014

16933 Downloads

In this Family I created a Parametric Rectangular Table. You can Change Height, With and Length of the table just by Changing Shared parameters in Properties section Easily. 

No Rating

Product Version: Revit MEP 2020

324 Downloads

Afternoon all, me again.

fancy looking Side table for your living space.

Modelled off something i found on the net but i didnt have the size or correct shape of the top so put my own spin on it.

2 Material parameters, Table top and Frame.

Enjoy

No Rating

Product Version: Revit MEP 2014

20410 Downloads

Detailed Pool Table. Non-Parametric. You can change the finish of the pool table, felt, and pockets.

Product Version: Revit Architecture 2013

35006 Downloads

Oudoor dining table from Seaside Casual. It is the MAD Dining Table. Materials are parametric. Revit 2017

No Rating

Product Version: Revit Architecture 2017

2287 Downloads

Kohler - K-3199-4 Marcato Stainless Steel Kitchen Sink

Product Version: Unknown

16439 Downloads

Kohler - K-3319 PRO TaskSink 15" Stainless Steel Sink

Product Version: Unknown

1100 Downloads

Kohler - K-3318 PRO CookSink 15" Stainless Steel Sink

No Rating

Product Version: Unknown

660 Downloads

Product Version: Revit Architecture 2014

2986 Downloads

Here is a dining table that was modeled up to match a previous chair that I had designed. Upon finishing this table design I went back and revised the chair to match the table a little better. The chair is listed under SRosson Dining chair. Enjoy and feel free to give feedback and suggestions.

Product Version: Unknown

41643 Downloads

Fully Parametric Circular Dinning Table.

With No of chiars also parametic with diameter of table 

Product Version: Revit Architecture 2020

11120 Downloads

Parametric Wood Slat table with glass top

Materials: Table Top, Slat, Support

Product Version: Revit Architecture 2015

2651 Downloads

Series CO-200-RC epoxy coated cast iron floor cleanout with 5-1/8 in. (130mm) round adjustable nickel bronze top, stainless steel carpet marker, and no hub (MJ) connection.

No Rating

Product Version: Revit MEP 2014

115 Downloads

POOL SPOT

Art. S.3693 12 MODULES LED RGBW (W=6000K)  24VdcRated luminaire luminous flux: 430lmRated input power: 31WLuminaire efficacy: 14lm/WRequires remote ON-OFF power supply or Dimmable power supply CELUMINAIRE TYPESubmersion luminaire. IP rating IP 68MATERIAL CHARACTERISTICSTalc-filled technopolymer housing. Marine grade stainless steel AISI 316L front trim 2 mm thick. A4 grade Stainless Steel screws with 2,5-3% molybdenum content whitch increases the resistance against corrosion. Toughened transparent glass 4mm thick for MICROPOOL SPOT, 8mm MINIPOOL SPOT and POOL SPOT. Mechanical resistance IK 10 Silicone gaskets.LIGHTING PERFORMANCEThe spectral distribution of the light is intended to change the appearance of the scene or object lit. Not intended for use in other applications. Lamp  fixed position. LOR -- WIRINGPOOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool. Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool. Single cable entry with M20 brass cable gland. Luminaire hard wired with 6 m. cable (5 x 1mm²) cable type H07RN8-F for MICROPOOL RGBW, 6 m. cable (5 x 1mm²) cable type H07RN8-F for MINIPOOL RGBW and 8 m. cable (5 x 1mm²) cable type H07RN8-F for POOL RGBW closed by cable gland and sealed with B component epoxy resin, wired internally protected by silicon sheaths Isolation: CLASS III . Available colours: Stainless steel (cod.19). Weight: 4.48 Kg LED circuit included. Not suitable to install outside the water.The luminaire cannot be installed out of the water. Not compatible with pools containing salt water and that are treated with salt water chlorinationPOOL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

1075 Downloads

modeled after Coffee Table One by Another Country

Open Material Parameters 

Product Version: Revit Architecture 2016

31093 Downloads

MIFAB® Series MI-EC (specify size) of flexible rubber end caps manufactured from neoprene compound that meets the requirements of ASTM C-564 with inside knurling for superior pipe grip and Type 300 Series of stainless steel clamp tightened with 5/16” Type 300 stainless steel hex head screw. MI-EC Series of end caps are tested and certified to I.A.P.M.O.

Standard PS 90-06 and CSA Standard B602-2016 and listed with I.A.P.M.O. All models are listed to the National Plumbing Code of Canada and relevant Canadian Standard(s) and bear the cUPC mark of conformity. Non constant temperature rating is 140 F.

No Rating

Product Version: Unknown

72 Downloads

MIFAB Series MI-RICE sanitary powder epoxy coated inside and outside fabricated 10 gauge steel rice interceptor with flow rate of _____(indicate). Unit shall include: ½”(13) thick fixed primary straining baffle with 1/4” (6.4) holes and secondary ½”(13) thick removable straining baffle with 1/4” (6.4) holes, removable cross bar , securing bolt(s), stainless steel calibrated orfice plate, and steel powder epoxy coated non skid rectangular gasketed lid(s).

No Rating

Product Version: Unknown

45 Downloads

Steel Framed Disablity Door

Product Version: Unknown

1140 Downloads

less complex

Product Version: Unknown

8415 Downloads

Product Version: Revit Architecture 2009

4728 Downloads

This is my first family, I hope you like it.

This is a wine tank family with a few types that indicate the capacity of the tanks in hectolitres (1 hL = 100 L).

For some reason, for it to show properly you need to have Masses visible.

Made in Revit 2017!

Based on products from "Letina Inox"

Product Version: Revit Architecture 2016

2569 Downloads

This Glass and Steel Awning utilizes 3 components to set the piece up. All are generic wall based components so they will need a wall backing for them to work.

Awning Frames - is actually just the beam that sits against the wall

Awning Beams - is the module used to fill in the awning.

Awning Beams w-Tension Rods - To show the Tension rod structure at the ends and intermediate as you choose

The canopy's are parametric in "beam to beam" width and material properties but not in length or any others. If you want to modify them fix them in families or build your own ; )

Product Version: Revit Architecture 2014

7202 Downloads

This piece was originally supposed to be a sofa table, however, it can be used as an accent or entry table.

Dimensions:

Depth: 1' 4 3/4"

Height: 3'

Width: 7'

This is my first piece of furniture created using Revit, so I am still a little noobish :) I'm open to any constructive critisism. I don't really know a lot of the tools or commands because I am still learning the software.

Product Version: Revit Architecture 2013

27714 Downloads

A standard size pool table (8' standard size = 44"w x 88"l playing surface).

The materials can be controlled by parameters.  Visibility of the pool cue and balls can be controlled by parameters as well.  A 3'-6" play area clearance is built in as well, and can also be controlled for visibility.

The model is not currently set for the table size to be parameter controlled, and if you adjust the size it'll get wonky. 

BUT!  If you're looking for that standard size pool table, this could be the one for you.  I'll try to upload a better version later with adjustable size parameters when I get the chance to update this one.  

Pool table, snooker table, bar games, billiard, billiards

Product Version: Unknown

21634 Downloads

No Rating

Product Version: Unknown

439 Downloads

Filtrine Model 107-14-HL-TM High/Low ADA bowl-type drinking fountain w/ integral TasteMaster Purifier in a locking stainless steel cabinet below the fountain

No Rating

Product Version: Revit Architecture 2012

10902 Downloads

Heres a nice design coffee table for a modern look.

Size is fixed as per unit sold, 980mm Width, 480mm Height and 480mm Depth.

Inner core and main table materials are changeable so enjoy choosing your colour / material.

No Rating

Product Version: Revit MEP 2014

7782 Downloads

No Rating

Product Version: Unknown

857 Downloads