 |
Series 994DCDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 994DCDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of a stainless steel body, stainless steel internal parts, thermoplastic check valves and a bottom-mounted relief valve. Series 994DCDA is half the weight of competitive designs, and its short lay length makes installation and maintenance simple and easy. It is ideal for installation on fire protection systems. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar) |
No Rating |
Product Version: Revit MEP 2014
340 Downloads
|
|
 |
|
|
Product Version: Unknown
5402 Downloads
|
|
|
 |
Based on the generic Stainless Steel Pool Ladder I have created a version with parametric steps.
In elevations you can drag to increase the length of the ladder and number of steps to fit any depth of swimming pool.
You can also edit Properties to adjust the height between the steps, default is 9 inches.
Width of the ladder is fixed, so there's a challenge for anyone who wants to edit it and make a version with adjustable width.
This may be used as the basis for anyone wanting to create any number of parametric ladders, steps, etc. If you do then please add your contribution to the community. |
|
Product Version: Revit Architecture 2012
14809 Downloads
|
|
|
 |
|
|
Product Version: Revit Architecture 2011
4082 Downloads
|
|
|
 |
Series 957RPDA, 957NRPDDA, 957ZRPDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 957RPDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of a compact, stainless steel body with stainless steel internal parts, two check valves, a pressure-differential relief valve, shutoff valves, torsion spring checks and relief valve, and bronze, nickel-plated test cocks. Series 957RPDA, 957NRPDDA, 957ZRPDA is 70% lighter than traditional designs and is ideal for health hazard cross-connection, such as on fire sprinkler systems. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar). |
No Rating |
Product Version: Revit MEP 2014
355 Downloads
|
|
|
 |
100% RAC 2009 - (Not an Autocad import) Not Parametric Generic Model |
|
Product Version: Revit Architecture 2009
23990 Downloads
|
|
|
 |
Series 774 Double Check Valve Assemblies prevent the backflow of polluted water from entering into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body and low head loss. Series 774 is ideal in applications identified by local authorities as non-health hazard. Maximum Working Pressure: 175psi (12.06 bar). |
No Rating |
Product Version: Revit MEP 2014
508 Downloads
|
|
|
 |
Flat bar type with curved returns. Parametric, including automatically spaced brackets |
No Rating |
Product Version: Revit Architecture 2013
2159 Downloads
|
|
|
 |
Touch-Sensitive Designer Torch Table Lamp
Frosted Glass, Stainless Steel Base
Visit my website at http://www.4u2cdesign.com
|
No Rating |
Product Version: Revit Architecture 2010
6397 Downloads
|
|
|
 |
Stainless steel frameSeamless, contoured wood edgesDimension: 42L X 30W X 35H |
|
Product Version: Revit Architecture 2011
4555 Downloads
|
|
|
 |
Stainless steel simple railing with glass panels and pliers - Parametric - Export 3d Studio OK
|
|
Product Version: Revit Architecture 2015
14706 Downloads
|
|
|
 |
Generic tall, square table for stool seating or standing for a bar.
Brushed stainless steel base and stand, wooden top.
Table height, width (square), base diameter and top material are all parametric. |
|
Product Version: Revit Architecture 2013
30883 Downloads
|
|
|
 |
GE Profile Stainless Steel 25.6 cu. ft. Side-by-Side Refrigerator ENERGY STAR® Mfr. model #PSHS6TGX Comment and Rate please. |
|
Product Version: Unknown
11360 Downloads
|
|
|
 |
- Top is made from Wood
- Stand/Frame is made from stainless steel
- Dimension: 32D x 30H inches
|
No Rating |
Product Version: Revit Architecture 2010
4601 Downloads
|
|
|
 |
Steris Clean-Up Double Sink |
|
Product Version: Revit Architecture 2014
23741 Downloads
|
|
|
 |
Series 757DCDA, 757NDCDA Double Check Detector Assemblies prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. Compact housings consist of two independently operating tri-link check valves, two shutoff valves, and four test cocks. They feature a stainless steel housing and sleeve and are 70% lighter than traditional designs. Series 757, 757N is designed for non-health hazard applications and may be installed under continuous pressure service to protect against both backpressure and backsiphonage. This Series is used primarily on fire sprinkler lines when it is necessary to monitor unauthorized use of water. Maximum Working Pressure: 175psi (12.06 bar). |
No Rating |
Product Version: Revit MEP 2014
568 Downloads
|
|
|
 |
Embankment slides. Height 2000mm, Width 1000mm, in stainless steel. Not parametric. With one wave. Landscape improvement. Revit 2019.
Tobogan d'acer inoxidable per a situar en talús. Alçada de caiguda 2.00m, amplada 1.00m. S'assembla al model 3.63360 de Richter. |
No Rating |
Product Version: Revit Architecture 2019
923 Downloads
|
|
|
 |
This lock as an external key access with internal thumbturn, clamped to glass doors. |
|
Product Version: Revit Building 9.1
6613 Downloads
|
|
|
 |
C1400-RD: MIFAB Series C1400-RD round, smooth stainless steel access cover and 3 ½” (89) long anchor screw. (Specify cover size.) |
No Rating |
Product Version: Unknown
182 Downloads
|
|
|
 |
Embankment slides. Height 3000mm, Width 1000mm, in stainless steel. Not parametric. With one wave. Landscape improvement. Revit 2019.
Tobogan d'acer inoxidable per a situar en talús. Alçada de caiguda 3.00m, amplada 1.00m. Amb una ona. S'assembla al model 3.63390 de Richter. |
No Rating |
Product Version: Revit Architecture 2019
1053 Downloads
|
|
|
 |
MIFAB® Series R1100-PJ lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring, stainless steel perforated extension and standard 1” (25) thick, 8” (203) square adjustable ductile iron tractor grate. |
No Rating |
Product Version: Unknown
80 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
|
Product Version: Revit Architecture 2019
73 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
27 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
22 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
18 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
16 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
24 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
20 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
16 Downloads
|
|
|
 |
Fully welded pipe and assembly ring in acid proof stainless steel AISI 316 / EN 1.4401. Flange in stainless steel AISI 304 / EN 1.4301 for bitumen membrane or foil coated steel flange for foil membrane. Membranes in SBS or APP bitumen as well as various foil types are integrated from the factory |
No Rating |
Product Version: Revit Architecture 2019
32 Downloads
|
|
|
Search