Series ISCA-550 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts.

No Rating

Product Version: Revit MEP 2014

61 Downloads

Adirondack chair and matching table based of my own. Enjoy!

Revit 2014

Product Version: Revit Architecture 2014

16600 Downloads

No Rating

Product Version: Revit Architecture 2010

3464 Downloads

Series ISCA-560 floor mounted service sink carrier with heavy gauge epoxy coated steel offset uprights with welded feet, epoxy coated cast iron fitting, no hub waste and vent connections (specify size), epoxy coated cast iron compression seal faceplate assembly with steel mounting plate and brackets, adjustable ABS nipple with integral test cap and neoprene fixture gasket, plated hardware and chrome cap nuts.

No Rating

Product Version: Revit MEP 2014

59 Downloads

Product Version: Revit Architecture 2012

11564 Downloads

Featured by Lamps Plus, number 97529, has a bronze base with art glass shade

Product Version: Unknown

10664 Downloads

Based off of Tenere Dining Table

From Roche Bobois

Table designed by Lionel Morgaine

86.6"l x 29.1"h x 43.3"d

Materials by type

No Rating

Product Version: Revit Architecture 2020

148 Downloads

This is a parametric tv unit made of steel tubes and wooden shelves ,used it in my own house.

Product Version: Unknown

856 Downloads

Vertical Steel Sunshade fully parametric

No Rating

Product Version: Unknown

9231 Downloads

Steel framed Bike Store with glass/perspex Cover

Product Version: Revit Building 9.1

4461 Downloads

MIFAB® Series F1100-C ( * )-1 (* specify strainer diameter) lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard satin finished nickel bronze strainer with vandal resistant stainless steel all on key screws (For non-membrane floors, delete -C from Series number).

No Rating

Product Version: Unknown

25 Downloads

MIFAB® Series F1100-C ( * )-1 (* specify strainer diameter) lacquered cast iron floor drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and standard satin finished nickel bronze strainer with vandal resistant stainless steel all on key screws (For non-membrane floors, delete -C from Series number).

No Rating

Product Version: Unknown

13 Downloads

Parametric.

Product Version: Revit Architecture 2018

595 Downloads

Hi, I have been modelling a couple of objects that I thought I could share with the rest of you.

It has a visibility parameter where you can switch between the different sized tables

I drew it in revit 2021, I can export it into an odler version, but I don't have much faith in my skills to do it properly and keep it's materials.

No Rating

Product Version: Unknown

360 Downloads

Tube steel gate complete with latch and hinges

Product Version: Revit Architecture 2020

18767 Downloads

tavolo da giardino in mosaico

No Rating

Product Version: Revit Architecture 2013

2513 Downloads

Dining tablle covered with black marble

No Rating

Product Version: Revit Architecture 2016

7715 Downloads

Brass frame with glass top on black wood base

Product Version: Unknown

9512 Downloads

Knoll, 1966 outdoor furniture setting designed by Richard Schultz. 

Product Version: Revit Architecture 2014

31203 Downloads

ADDITIONAL PARAMETERS // MATERIALS

20 FREE NEW FAMILIES // DOWNLOAD AT THECREATIVEROUTE.COM

No Rating

Product Version: Revit Architecture 2018

745 Downloads

Product Version: Revit Architecture 2010

7980 Downloads

The MI-100 is engineered for equal distribution of water to all ports. It’s the perfect solution to keep sewer gas from entering the building from seldom used floor drains. The MI-100 can be located anywhere in the water supply and is engineered to permit the building owner to adjust the frequency and amount of water delivery through a timer and stainless steel solenoid valve. A manifold ensures that a minimum of 2 ounces of water are delivered to every port over a twenty-four hour period. The unit must be mounted 12” above the finished floor for every 20’ of water supply line. The MI-100 can be installed with a cabinet cover. The system is capable of priming from 1 to 30 floor drain traps. The MI-100 is practical to serve many floor drain traps in infrequently used buildings such as convention centers and sports facilities. The MI-100 is made of lead free materials that touch water.

No Rating

Product Version: Unknown

195 Downloads

Family types for the two different colors available.

Product Version: Revit MEP 2011

13019 Downloads

Inspired in a Mies van der Rohe design, rectangular, metal structure, modern

No Rating

Product Version: Revit Architecture 2010

4757 Downloads

Autoprogettazione

Product Version: Revit Architecture 2016

311 Downloads

Autoprogettazione

Product Version: Revit Architecture 2016

322 Downloads

Autoprogettazione

Product Version: Revit Architecture 2016

303 Downloads

Autoprogettazione

Product Version: Revit Architecture 2016

276 Downloads

Reminiscent of Frank Lloyd Wright's design. Circular top of dark blue glass, dark mahogony stained wood for the supports

Product Version: Revit Architecture 2009

6004 Downloads

Steel anchoring fixture for glass panels in walls or railings

Product Version: Revit Building 9.1

6186 Downloads