FINALLY A STYLISH TELEVISION!!

The modern and slim Samsung ES6305 with thin brushed steel frame is the television model this is based on.

32", 40", 46", 50", 55", 60" MODELS ALL AVAILABLE!!!

Set any image you want on screen as decal in 3d view.

wall-based.

Product Version: Revit Architecture 2013

179720 Downloads

I modeled Erwin Hauer Screen Wall Continua Series Design 3, but rearreange panels pieces so its a "custom" design.

For full parameter descripcion see panel design 3. 

Product Version: Revit Architecture 2016

6551 Downloads

News anchor desk.

• Elevated glass table top


• Flat Screen TV In Front

Product Version: Revit Architecture 2014

3373 Downloads

A presentation cabinet for conference rooms.  This model is based on the Peter Pepper Products CC-4848 product.

The Presentation Cabinet contains two doors which open to reveal a whiteboard inside as well as a pull down screen and fabric panels on the inside of the doors to pin up papers. 

I did flex the family so you should have no problems with creating a custom size.  All materials are set, but you may change them if desired.

I searched long and hard for a model of this product (which is used quite often) but couldn't find one anywhere, so I created one.

Product Version: Revit Architecture 2011

6444 Downloads

Product Version: Revit Architecture 2011

20746 Downloads

A quick model of the Butterfly MX 11.6" screen recessed entry panel for entry access for apartment buildings.  

This family is wall hosted, but you can also open the hosted panel family to insert into a different family type if desired.

Materials are parameter controlled, dimensions are not.  I included a parameter for wall assembly depth in case you need to offset the box for any specific additional depth at unique conditions.

Enjoy!

No Rating

Product Version: Revit Architecture 2020

727 Downloads

EDIT: I did not realize when creating this upload that I had included the wrong file, see comments below.  The correct file is located here: http://www.revitcity.com/downloads.php?action=view&object_id=13167

Non-Wall-based family so feel free to put it wherever you like.

There are several family types within the family for the various screen sizes (the ratios should stay the same so the images you use should all be the same length and width just different sizes of each).

Family sizes include: 32", 37", 42", 47", 52", 55", 60", 65", 72"

(This has always been a peeve of mine seeing the same family 10 times with each being a different size...just make different family types!)

Enjoy!  Please rate/comment.  Thanks!

Product Version: Revit Architecture 2011

14100 Downloads

MIFAB® LIL-S Series HDPE injection molded solids interceptor. Unit shall include: internal perforated sediment bucket (1/4″ diameter holes) with coarse screen, baffle assembly (3/8″ x 1 1/4″ slots) and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

44 Downloads

Download: http://focuslighting.bimobject.com/5703646100749 

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app

As style and simplicity are the two key elements in the design of this projector, it perfectly matches your meeting room's decor.

Product Version: Unknown

3332 Downloads

MIFAB® Series F1810 lacquered cast iron planting area drain with anchor flange, cast iron waterproofing membrane clamp ring, and standard self-locking cast dome strainer with stainless steel mesh screen.

No Rating

Product Version: Unknown

126 Downloads

MIFAB® Series F1820 lacquered cast iron deep sump large planting area drain with anchor flange, cast iron waterproofing membrane clamp ring, and low profile, self-locking aluminum dome strainer with stainless steel mesh screen.

No Rating

Product Version: Unknown

118 Downloads

The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug. The integral strainer screen shall be accessible for cleaning without removing the device from the line.

No Rating

Product Version: Unknown

192 Downloads

The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug. The integral strainer screen shall be accessible for cleaning without removing the device from the line.

No Rating

Product Version: Unknown

114 Downloads

The Ductile Iron “Y” type strainer shall be in 125 Class and conform to ANSI B16.1, and both the body and access cover shall be made of Ductile Iron A536 65-45 12. The valve shall be supplied with a drain/blow-off connection with a ductile iron closure plug and will have an FDA approved epoxy coating inside and out. The integral strainer screen shall be accessible for cleaning without removing the device from the line.

No Rating

Product Version: Unknown

295 Downloads

Revit 2019 : Can appear in a Site schedule, Place Family on control point. There are 3 Types of control points to choose from. Monument, Monument Calc’d and Control Point. Each type has its own Gen. Annotation symbol. The first two are square n. The 3rd is a triangle p. There is a 3D raised Triangle on Family. Use the top of the triangle to attach leaders for Spot coordinates and Elevations to create a leader to the top of the 3D Triangle on top. The NEE parameters are instance parameters and will not move the point. Use “Survey Site Tag NEE 2019 updated” To show the NEE on screen. Use Spot coordinates and Elevation tags to move the family to match the instance NEE. Enjoy!

Product Version: Revit Structure 2018

415 Downloads

MINISTAGE ROUND SPOT

Art. S.1315W1 MODULES COB 3000K  220-240Vac 1225lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1040lmRated input power: 11.2WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEProjector. IP rating IP 66MATERIAL CHARACTERISTICSDie-cast EN AB-47100 aluminium housing with high corrosion resistance.Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCE99.98% pure aluminium reflectors, or with concentrating lenses: The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. Clear toughened glass. LOR -- INSTALLATION AND MAINTENANCEThe tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. WIRINGSupply 5m cable section type FEP/FEP + PCP (Microstage and Ministage) or FLAT (Stage and Megastage) sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 1.73 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGN MICROSTAGE BLADE OF LIGHT PATENTED, REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

2304 Downloads

MIFAB® Series R1960 fabricated Type 304 stainless steel downspout nozzle with hinged perforated bird screen cover in standard and flush models (Suffix -F). Are made to receive PVC, ABS or cast iron pipe inside the “A” dimension. The R1960 models “sleeve over the pipe sticking out of the wall. The R1960-F models sleeve over the pipe and are flush with the wall.

No Rating

Product Version: Unknown

254 Downloads