I fixed the earlier upload that I made so the door handle is on the correct side now and the location of it is also parametric now.  Enjoy! :)

Product Version: Unknown

1557 Downloads

Fully Adjustable  Door material can be changed in materials.

No Rating

Product Version: Revit Building 9

2764 Downloads

This casework family is a model of American Woodmark's one door, one drawer, plastic bag door storage unit base cabinet.  All the components operate independently.  The plastic bag storage unit is a linked family tied to a parameter in the host family.  The two widths offered by American Woodmark, 15" and 18", are included as family types.  A half depth shelf hides inside the cabinet.

Product Version: Revit Architecture 2012

5750 Downloads

Here is a double version of my single door with awning window. The trim is parmetric inside and out, the widnow height is parmetric. I fixed some of the issues that I had with the single door in this Family. However if you can improve on the family feel free to do so.

Product Version: Unknown

10965 Downloads

Adaptation of the single flush door family, but with a knob.  Knob scales with door thickness and width.  Knob does not display in plan. Good for adding interest to 3D views and walkthroughs while not sacrificing clean floorplans.

No Rating

Product Version: Revit Architecture 2011

3980 Downloads

A Fully parametric door with changeble panels, architraves, Frames, Sill materials and much more would highly appreciate feedback and improvement

No Rating

Product Version: Revit Architecture 2013

2811 Downloads

door made at nohs

Product Version: Unknown

2871 Downloads

door made at nohs

Product Version: Revit Architecture 2013

10012 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

2823 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

1796 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

1554 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

1553 Downloads

door made at nohs

No Rating

Product Version: Revit Architecture 2013

2670 Downloads

Door for a barn stall

Product Version: Revit Architecture 2009

12429 Downloads

This was my first made door in revit ;)

Product Version: Unknown

9188 Downloads

Double Barn door with exposed rail and sliders - most things are parametric and I think I've tested it thoroughly - swap out the door panel to your own if you prefer - has the ability to turn on and off centre crash rail and braces as instance parameters.  Steel single rectangular rail on spacers off the wall, runners connected to stiles.

Product Version: Revit Architecture 2016

8593 Downloads

This is a repair of another family i downloaded from revitcity. I fixed an issue with the door slab not locating correctly in section and 3d. 

No Rating

Product Version: Revit Architecture 2010

571 Downloads

The parametric door contains embedded threshold along with standard ironmongery required in a ELV Room, Telecom Room and Electrical Room door.

No Rating

Product Version: Revit Architecture 2014

4768 Downloads

A simple door tag displaying Door Type Mark, rough height and width. Can be mirrored by changing type.

No Rating

Product Version: Unknown

2554 Downloads

Barn Door 144 wide x 80 tall opening dbl wood door both sides

No Rating

Product Version: Unknown

2744 Downloads

Barn Door 144 wide x 80 tall opening dbl wood door both sides

No Rating

Product Version: Unknown

1466 Downloads

Exterior Entrance Pair doors with pair side lights. 3 levels of detail, Detail level FINE show packers and jambs, heads and sill. Door panel material are changeable. Door created by nested families

Product Version: Unknown

11912 Downloads

This window was used in a wall with brick veneer and is not adjustable.  There is an area of window left out to allow for a dbl door to be inserted.  This will allow for the window and door to be tagged seperately.

Product Version: Revit Architecture 2011

17458 Downloads

Fully parametric door with aluminum strips, casing and frame in aluminum.  Door is EBE Porte Linea 01 available in the US at www.rest-agio.com.  Visit the site for full line catalog as well as other luxury finishes from Italy.

Done in Revit 2013

Product Version: Revit Architecture 2012

22016 Downloads

I found this door online and did a LOT of work on it.  You can change the size, frame, panel configuration (glass or solid), handle, and material.  You can also show the door closed or opened (any  angle) in 3D as well as in Plan View (3D angle and plan angle do NOT have to be the same and are instance based).  It's my first family and I am pretty pleased with it.

Product Version: Revit Architecture 2014

9018 Downloads

Added trim to the basic shape
Showing Door swings in plan

Product Version: Unknown

8823 Downloads

Added trim to the basic shape
Showing Door swings in plan

Product Version: Unknown

4545 Downloads

This double door replaces a curtain wall panel. Door width updates to match curtain grids. Door leaf widths are adjustable. Currently one door has a handle.

Product Version: Revit Architecture 2011

34786 Downloads

Barn Door 60 wide x 80 tall one door

No Rating

Product Version: Unknown

2261 Downloads

Single Barn door with exposed rail and sliders - most things are parametric and I think I've tested it thoroughly - my first upload so hope it works - swap out the door panel to your own if you prefer - has the ability to turn on and off centre crash rail and braces as instance parameters.  Steel single rectangular rail on spacers off the wall, runners connected to stiles.

Product Version: Unknown

9796 Downloads