|
|
Search Downloads
Search Results
 |
MIFAB® Series MI-OS ___ (specify model) sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil / sediment interceptor with sludge capacity of ____ lbs. (specify). Interceptor complete with ANSI rated “Special Duty” ductile iron grate(s) with load rating over 10,000 lbs., removable sediment bucket and mud pan, deep seal trap with integral sewer gas stopper, internal vent system, cleanout plug and side outlet. |
No Rating |
Product Version: Unknown
138 Downloads
|
|
 |
MIFAB® Series MI-SAND/OIL____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel sand and oil interceptor with a holding capacity of - see chart below. Interceptor complete with gasketed non-skid powder epoxy coated lid, removable sediment bucket with perforated baffle beside inlet, deep seal trap with integral sewer gas stopper, two 2” vent connections, adjustable oil draw off assembly and no hub inlet/outlet. |
No Rating |
Product Version: Unknown
231 Downloads
|
|
 |
MIFAB® Series F1100-C-T(*)-3 (* specify strainer diameter) lacquered cast iron floor drain with anchor flange, cast iron membrane clamp with primary and secondary weepholes for waterproofing membrane, and heavy duty, solid, gas tight, spanner wrench, vandal proof, stainless steel cover for secured access. (For non-membrane floors, use MIFAB F1100-T Series.) |
No Rating |
Product Version: Unknown
34 Downloads
|
|
 |
MIFAB® Series XL-MI-G ____ sanitary, acid resistant, epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable (fixed for XL-MI-G-10/-11) baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), stainless steel calibrated orfice plate, internal air relief by-pass, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). |
No Rating |
Product Version: Unknown
335 Downloads
|
|
 |
MIFAB® SUPER-MAX gravity grease interceptor has a limited lifetime warranty and is made in the U.S.A. out of seamless, rotationally molded High Density Polyethylene with 3/8” uniform wall thickness. Interceptor is designed for above or below ground installation and includes an adjustable lid system, sample port access, internal baffle, deep seal trap covered by lid, internal air relief by-pass, stainless steel calibrated orifice plate (internal flow control), base for support and floor level installation and 4″ no hub inlet and outlet connections. Steel encased composite lids provide a water / gas tight seal and have a minimum of 20,000 LB. load capacity – in accordance with the loading requirements of AASHTO H20. The high density polyethylene material is PE 3135 from Dow 9.39 with a density of 0.939 g/cm3. The -PDI model is tested and certified to the PDI G-101 Standard, 100 GPM flow rate. For indoor/outdoor use. |
No Rating |
Product Version: Unknown
284 Downloads
|
|
 |
MIFAB® Series MI-O-HU ____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). Unit comes complete with integral holding tank for additional waste oil storage. |
No Rating |
Product Version: Unknown
278 Downloads
|
|
 |
MIFAB Series MI-SAND____ sanitary epoxy coated inside and outside fabricated 10 gauge steel sand interceptor.
Unit shall include: removable cross bar, four 3” (76) threaded vent connections, solid straining baffles, stainless steel calibrated orfice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal air relief by-pass, and steel powder epoxy coated non skid rectangular gasketed lid(s). |
No Rating |
Product Version: Unknown
103 Downloads
|
|
 |
MIFAB® Series MI-O sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include:
sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated non skid rectangular lid. |
No Rating |
Product Version: Unknown
71 Downloads
|
|
 |
The MI-100 is engineered for equal distribution of water to all ports. It’s the perfect solution to keep sewer gas from entering the building from seldom used floor drains. The MI-100 can be located anywhere in the water supply and is engineered to permit the building owner to adjust the frequency and amount of water delivery through a timer and stainless steel solenoid valve. A manifold ensures that a minimum of 2 ounces of water are delivered to every port over a twenty-four hour period. The unit must be mounted 12” above the finished floor for every 20’ of water supply line. The MI-100 can be installed with a cabinet cover. The system is capable of priming from 1 to 30 floor drain traps. The MI-100 is practical to serve many floor drain traps in infrequently used buildings such as convention centers and sports facilities. The MI-100 is made of lead free materials that touch water. |
No Rating |
Product Version: Unknown
194 Downloads
|
|
 |
MIFAB® Series MI-E-O____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.
Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). |
No Rating |
Product Version: Unknown
49 Downloads
|
|
 |
MIFAB® Series MI-E-O____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.
Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). |
No Rating |
Product Version: Unknown
46 Downloads
|
|
 |
MIFAB® Series MI-E-O-HU__ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.
Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). |

|
Product Version: Unknown
122 Downloads
|
|
 |
MIFAB® Series MI-G-SDH ____ sanitary acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable baffle assembly and cross bar, internal deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, internal steel cone, flexible drawoff hose and cap, hose clamp, line shut off valve and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). |
No Rating |
Product Version: Unknown
154 Downloads
|
|
 |
MIFAB Series MI-G ____ sanitary, acid-resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include:
removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. Standard PDI-G101 and A.S.M.E. A112.14.3 and be so marked. |
No Rating |
Product Version: Unknown
446 Downloads
|
|
 |
MIFAB Series MI-G-SD ____ sanitary acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include:
removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, internal grease retention tray adjacent to grease draw-off valve and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). |
No Rating |
Product Version: Unknown
197 Downloads
|
|
 |
MIFAB Series MI-G-L-SDH ____ sanitary acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include: removable baffle assembly and cross bar, internal deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, internal steel cone, flexible drawoff
hose and cap, hose clamp, line shut off valve and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). |
No Rating |
Product Version: Unknown
140 Downloads
|
|
 |
Download: http://bimobject.com/en/metraflex/product/flanged_strainer_style_tf_125
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
The Metraflex Y Strainer prevents costly shutdowns and protects your pumps and equipment. Ideal for lower capacity piping systems, the Metraflex Y strainer works for steam, air, water, oil and gas lines. |

|
Product Version: Unknown
2150 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
33 Hz- 67 Hz - 3dB27 Hz- 150 Hz - 10dB
- continuous output
121 dBSPL
- peak output
127 dB SPL
- sensitivity
95 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
- driver complement
one 12" woofer
- dimensions
24 x 15 x 24 inches
- weight
83 lbs
- Rated Impedance
8 Ohms
- Power Rating
400 W continuous, 800 W program
http://www.danleysoundlabs.com/products/subwoofers/specialty-subs/cs30/
|
No Rating |
Product Version: Unknown
489 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
18 Hz- 100 Hz -3dB16 Hz -10dB
- continuous output
122 dB SPL
- peak output
128 dB SPL
- sensitivity
95 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
- driver complement
one 12" long excursion woofer
- dimensions
87.5 x 18 x 20 inches
- weight
220 lbs
- Rated Impedance
8 Ohms
- Power Rating
500 W continuous, 1000 W program
http://www.danleysoundlabs.com/products/subwoofers/specialty-subs/dts20/
|
No Rating |
Product Version: Unknown
263 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
34 Hz- 300 Hz -3dB28 Hz - 400 Hz -10dB
- continuous output
141 dB SPL
- peak output
147 dB SPL
- sensitivity
117 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
- driver complement
two 18" long excursion woofers
- dimensions
45 x 45 x 22.5 inches
- weight
277 lbs
- Rated Impedance
switchablea single 2 ohm loadortwo 4 ohm loads
- Power Rating
3600 watts continuous 14,400 watt peak
http://www.danleysoundlabs.com/products/subwoofers/dbh/dbh218/
|
No Rating |
Product Version: Unknown
209 Downloads
|
|
 |
SPECIFICATIONS
- coverage Pattern
NA
- operatingfrequency range
15 Hz- 70 Hz - 3dB12 Hz -10dB
- continuous output
127 dB SPL
- peak output
133 dB SPL
- sensitivity
100 dBSPL (2.83 Volts into rated Z, at 1 meter) measured in half space
- driver complement
two 12" long excursion woofers
- dimensions
59.5 x 44 x 16 inches
- weight
285 lbs
- Rated Impedance
4 Ohms
- Power Rating
1000 W continuous, 2000 W program
http://www.danleysoundlabs.com/products/subwoofers/specialty-subs/dts10/
|
No Rating |
Product Version: Unknown
192 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
19 Hz – 125 Hz - 3 dB 17 Hz -10dB
- continuous output
120 dB SPL
- peak output
126 dB SPL
- sensitivity
94 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
- driver complement
two 8" long excursion woofers
- dimensions
11 x 48 x 45 inches
- weight
156 lbs
- Rated Impedance
8 Ohms
- Power Rating
400 W continuous, 800 W program
http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th-spud/ |
No Rating |
Product Version: Unknown
105 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
28 Hz - 150 Hz - 3 dB23 Hz – 200 Hz -10dB
- continuous output
146 dB SPL
- peak output
152 dB SPL
- sensitivity
110 dB SPL (2.83 Volts into rated Z, at 1 meter), measured in half space
- driver complement
eight 12" long excursion woofers
- dimensions
60 x 60 x 28 inches
- weight
584 lbs
- Rated Impedance
Switchablea single 4 ohm loadortwo 8 ohm loads
- Power Rating
8000 W continuous 16,000 W program
http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th-812/
|
No Rating |
Product Version: Unknown
134 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
22 Hz - 180 Hz - 3 dB 18.5 Hz – 200 Hz -10dB
- continuous output
138 dB SPL
- peak output
144 dB SPL
- sensitivity
109 dB Spl (2.83 Volts into rated Z, at 1 meter), measured in half space
- driver complement
two, long excursion, 21" woofers
- dimensions
60 x 60 x 28 inches
- weight
480 lbs
- Rated Impedance
switchablea single 2 ohm load ortwo 4 ohm loads
- Power Rating
3000 W continuous 6000 W program
http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th-221/
|
No Rating |
Product Version: Unknown
110 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
40 Hz - 250 Hz -3 dB28 Hz - 300 Hz -10dB
- continuous output
137 dB SPL
- peak output
143 dB SPL
- sensitivity
108 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
- driver complement
one 18" long excursion woofer
- dimensions
40 X 22.5 X 28.5 inches
- weight
160 lbs
- Rated Impedance
4 Ohms
- Power Rating
1700 W continuous, 3400 W program
http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th118/
|
No Rating |
Product Version: Unknown
164 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
38 Hz - 200 Hz - 3 dB33 Hz - 280 Hz - 10 dB
- continuous output
133 dB SPL
- peak output
139 dB SPL
- sensitivity
106 dB SPL (2.83 Volts into rated Z, at 1 meter), measured in half space
- driver complement
one 15 inch long excursion woofer
- dimensions
40 X 22.5 X 28.5 inches
- weight
152 lbs
- Rated Impedance
4 Ohms
- Power Rating
1000W continuous, 2000 W program
http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th115/
|
No Rating |
Product Version: Unknown
109 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
38 Hz - 200 Hz +/- 3 dB 31 Hz – 200 Hz -10 dB
- continuous output
133 dB SPL
- peak output
139 dB SPL
- sensitivity
104 dB SPL (2.83 Volts into rated Z, at 1 meter), measured in half space
- driver complement
two 12" long excursion woofers
- dimensions
36 x 15 x 36 inches
- weight
142 lbs
- Rated Impedance
4 Ohms
- Power Rating
1400 W continuous, 2800 W program
http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th-212/
|
No Rating |
Product Version: Unknown
86 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
33 Hz - 200 Hz -3dB27 Hz - 260 Hz -10 dB
- continuous output
126 dB SPL
- peak output
132 dB SPL
- sensitivity
100 dB SPL (2.83 Volts into rated Z, at 1 meter), measured in half space
- driver complement
one 12" Long Excursion Woofer
- dimensions
38 x 18 x 30.2 inches
- weight
142 lbs
- Rated Impedance
8 Ohms
- Power Rating
400 W continuous, 800 W program
http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th112/
|
No Rating |
Product Version: Unknown
98 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
48 Hz - 200 Hz - 3 dB 41 Hz -10dB
- continuous output
129 dB SPL
- peak output
135 dB SPL
- sensitivity
101 dB SPL (2.83 Volts into rated Z, at 1 meter) measured in half space
- driver complement
one 12" long excursion woofer
- dimensions
24 x 15 x 24 inches
- weight
76 lbs
- Rated Impedance
8 Ohms
- Power Rating
700 W continuous, 1400 W program
http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/thmini/
|
No Rating |
Product Version: Unknown
98 Downloads
|
|
 |
SPECIFICATIONS
- operatingfrequency range
33 Hz - 200 Hz - 3 dB27 Hz – 200 Hz -10dB
- continuous output
140 dB SPL
- peak output
146 dB SPL
- sensitivity
110 dB (2.83 Volts into rated Z, at 1 meter), measured in half space
- driver complement
four 12" long excursion woofers
- dimensions
26.5 x 45 x 45 inches
- weight
357 lbs
- Rated Impedance
Switchablea single 2 ohm loadortwo 4 ohm loads
- Power Rating
4000 W continuous 8000 W program
http://www.danleysoundlabs.com/products/subwoofers/tapped-horns/th412/
|
No Rating |
Product Version: Unknown
111 Downloads
|
|
|
Site Stats
Members: | 2161655 | Objects: | 23325 | Forum Posts: | 152479 | Job Listings: | 3 |
|