Meant to be placed over a standard toilet in any given bathroom. Used Metal_Shelves_4135 as base. Created in Revit Architect (Student Version) 2011. Used catelog images and measurements as guide.

No Rating

Product Version: Unknown

5493 Downloads

Piece of casework designed to store papers. Sits on top of a base unit.

Product Version: Revit Architecture 2008

9861 Downloads

This American Woodmark model is their double oven, 96" high, 2 butt doors, 2 shelves, 1 drawer cabinet. American Woodmark offers this cabinet in three widths: 27", 30", and 33" and those are the three family types. All doors and the drawer operate independently. The oven width for each cabinet size is preset to the published size, but I've exposed the oven opening parameters as instance parameters if you want to cut a custom opening.

The best practice for operating the doors is to open and close them in angular increments of something less than 90° in a single operation. For example, if you want to open them to 90°, you could open them initially to 50° and then go to 90°. Close them the same way.

No Rating

Product Version: Revit Architecture 2013

3255 Downloads

REVIT VERSION 2022

ALL HARDWARE AND SHELVING ACCESSORIES ARE EDITABLE TO YOUR NEEDS. YOU MAY MOVE THEM ANY WHERE YOU NEED IT

No Rating

Product Version: Unknown

2096 Downloads

Base cabinet - fully parametric with option to show the pull or not.  Revit versin 2021

No Rating

Product Version: Unknown

2025 Downloads

This is a family of American Woodmark 90" high, 4 butt doors, adjustable shelves utility cabinets. The family includes the three widths offered: 24", 30", and 36" in 12" and 24" deep models. The doors operate independently.

The best practice for opening and closing the doors is to swing them in angular increments of something less than 90°.

No Rating

Product Version: Revit Architecture 2013

2419 Downloads

3 Unit Families - Family Types allow for 1, 2, or 3 unit family setting.

No Rating

Product Version: Unknown

3039 Downloads

Afternoon guys.

Heres a quick wall shelf i've done based on the following link

http://st.hzcdn.com/simgs/6c71220d0d922d4b_4-1578/modern-display-and-wall-shelves.jpg

This family is face based. I couldnt get the actual size so i've given the family width and height parameters. You'll see in the rendered image multiple shelves, there is one shelf within the family but i've given it a instant parameter for the materials and set up 5 different colours, Yellow, white, black, Red and purple.

Simple load in the family and then copy it around and change to what colour you want, this way you can custom the pattern you create.

Enjoy

Product Version: Revit MEP 2014

9290 Downloads

Insertion-Style: Face-Based. Materials: Editable. Size: Fixed. Position: Hanging or StationaryThis cup was originally designed to be hung on hooks within an antique butler's pantry. However, it can also be used in a stationary setting by selecting one of the pre-set "Type" values or by setting the instance parameters (Height and Angle) to zero (0) degrees. This is a face-based family, so be sure to be in a sufficient plan view or 3D view for selection of host. Under "Dimmensions", you can change the Height of the Cup (Height), Angle of the Cup (Angle of Cup), and the rotation of the handle (Handle Rotation). These are instance paramers, so there is no need to change anything within the "Type" parameters outside of the materials/finish.

No Rating

Product Version: Revit Architecture 2020

967 Downloads

I'm a newbie to revit and here's a drop of water to the ocean of models here. It's a non-parametric model since I have not learned yet how to make it smarter. Image reference from houzz designs.

Product Version: Unknown

1863 Downloads

Gangway for floating pontoon 4m long. It's made by 2 groups to lean on pontoon: gangway and connector flap. you have to rotate on relative hinges

Product Version: Revit Architecture 2015

1922 Downloads

Fully parametric library book shelving based on Librastack shelving. 3 available widths, 4 available heights means 1 parametric family with 12 different types. Parametric materials as well.

Product Version: Revit Architecture 2010

36934 Downloads

These library shelves have significant improvements over the first version I uploaded several years ago.

This new shelf scales seamlessly from 1.5 to 7+ feet, meaning new families are not needed for short or tall stacks.

As the overall height of the shelving grows or shrinks, the shelves not only space themselves evenly, but the shelf count now increases of decreases.  (from 0 to 4 intermediate shelves.)  Once again, the only parameter input needed from you is Height and the rest happens automatically.

Previous versions would squish the books into the shelf above it, and books would start overlapping at around 4 feet.

Books visible in "fine" detail level only.

I'm open to suggestions.  Possibilities:

A reporting parameter "volumes" (books per feet value) can help determine if you're meeting a library's requirements, and a "FORCE SHELF" field might also make sense if someone wants to add or remove a shelf at a particular height.

Product Version: Revit Architecture 2014

66969 Downloads

Parametric. You can change the number of shelves and the height of the bottom and top shelf. You can also change how far apart the two wall supports are and how far down they extend. you cannot change the width or depth. The array will glitch.

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the supports, not the shelf. Make sure the two elevation constraints are the same.

Hey, I'm really sorry but I forgot to align the top shelf with the top reference plane. Open the family in "back side" view, push AL (or the align button.) click on the top reference plane, then click on the top of the top shelf. That will fix it.

No Rating

Product Version: Unknown

2155 Downloads

Parametric. You can change the number of shelves and the height of the bottom and top shelf. You can also change how far apart the two wall supports are and how far down they extend. You cannot change the width or depth. The array will glitch.

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the supports, not the shelf. Make sure the two elevation constraints are the same.

Hey, I'm really sorry but I forgot to align the top shelf with the top reference plane. Open the family in "back side" view, push AL (or the align button.) click on the top reference plane, then click on the top of the top shelf. That will fix it.

Product Version: Unknown

1675 Downloads

Parametric. You can change the number of shelves and the height of the bottom and top shelf. You can also change how far apart the two wall supports are and how far down they extend. You cannot change the width or depth. The array will glitch.

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the supports, not the shelf. Make sure the two elevation constraints are the same.

Hey, I'm really sorry but I forgot to align the top shelf with the top reference plane. Open the family in "back side" view, push AL (or the align button.) click on the top reference plane, then click on the top of the top shelf. That will fix it.

No Rating

Product Version: Unknown

1650 Downloads

This is the same planting urn that can be found on rugi.org or in the standard revit content, but it contains...DIRT! A novel idea. You can place a plant in this and it won't appear to be floating in space!

Product Version: Unknown

12790 Downloads

This is the same as the other Jack Truss floating around but this one has a Two Cut Plumb tail.

Product Version: Unknown

3774 Downloads

Dimension: 55 W x 17 D x 71.6 H

Made from: Galvanized Steel and Tempered Glass

No Rating

Product Version: Revit Architecture 2012

2695 Downloads

Parametric. You can change the number of shelves and the height of the bottom and top shelf. You can also change how far apart the two wall supports are.

you cannot change the width or depth. The array will glitch.

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the supports, not the shelf. Make sure the two elevation constraints are the same.

Hey, I'm really sorry but I forgot to align the top shelf with the top reference plane. Open the family in "back side" view, push AL (or the align button.) click on the top reference plane, then click on the top of the top shelf. That will fix it. 

No Rating

Product Version: Unknown

923 Downloads

Parametric. You can change the number of shelves and the height of the bottom and top shelf. You can also change how far apart the two wall supports are. 

you cannot change the width or depth. The array will glitch.

REVIT 2016 (not 2015)

Note: the elevation constraint measures to the bottom of the supports, not the shelf. Make sure the two elevation constraints are the same.

Hey, I'm really sorry but I forgot to align the top shelf with the top reference plane. Open the family in "back side" view, push AL (or the align button.) click on the top reference plane, then click on the top of the top shelf. That will fix it.

No Rating

Product Version: Unknown

1018 Downloads

Ferrari California Convertible.  I've fixed the floating car height lol.  I've also included the AutoCAD file so it can be imported into any form of revit you may have. All materials can be changed, Color, interior, wheels etc. under the maerials list Ferrari C. Comments always welcomed.

Product Version: Revit Architecture 2012

44970 Downloads

This casework has shelves for 20 helmets and 21 slots for bats.

No Rating

Product Version: Revit Architecture 2013

1739 Downloads

• Playful stacked shelves extend away from one another


• Dimensions: 27W x 12D x 68.5H inches

No Rating

Product Version: Revit Architecture 2010

3386 Downloads

This Object is parametric. Also, you can adjust the number of shelves.

Product Version: Revit Architecture 2018

1072 Downloads

Diiferent types to fit your needs. Visibility options for items on the shelves. Changeable materials. I hope you guys like it!!

Product Version: Unknown

8631 Downloads

Morning all.

Not uploaded much lately but heres one for you.

Sorry about the poor render, i've not got my standard test project with me to load in to give a better look.

This coffee table has 2 material parameters, metal and wood. change how you like. The wood i used is on the link below.

http://allroundnews.com/wp-content/uploads/2012/02/seamless-wood-texture-free-1.jpg

The table has a number of different dimension parameters, overall length, depth and height of table + it also has a shelf depth too so you can these for added storage space.

hope it comes in useful

Enjoy

No Rating

Product Version: Revit MEP 2014

5604 Downloads

Ianjunker inspired me to recreate his corner cabinet based on one I had in a previous residence which I liked. Essentially it is the same with the main difference being the door is attached to the shelving. By rebuilding it from scratch I learned a lot of the nuances of Revit trying to get all the parameters to work. Enjoy!

Thanks again to Ianjunker for this model: https://www.revitcity.com/downloads.php?action=view&object_id=14822

Product Version: Revit Architecture 2020

1457 Downloads

This is a parametric tv unit made of steel tubes and wooden shelves ,used it in my own house.

Product Version: Unknown

866 Downloads

6" wide x 12" deep open curved shelves. 30" or 42"

No Rating

Product Version: Revit Structure 2017

1959 Downloads