 |
This door window fimily is dedicated to our PM Shri Narendra DD Modi
Nested door having 1 wooden door/window frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero if you do'nt need it. etc. etc. By adding param of Left or/& Right window with one can win frame also . No leaves are added in window frames to avoid the heavy size of the family. Lallan Ji |
No Rating |
Product Version: Revit Architecture 2015
1115 Downloads
|
|
 |
MIFAB® Series MC-27 water closet carrier with lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste and anti-crossover baffles for floor mounted back outlet water closets. Complete with adjustable 8”ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and side anchor tie down supports. |
No Rating |
Product Version: Unknown
42 Downloads
|
|
|
 |
this is a face based family (Rafter Anchor). Use the vertical face to place it (i.e. the vertical side of the double top plates) and then just align (AL) with the rafter.
If you benefit from it please subscribe to my channel https://www.youtube.com/channel/UCJZt58oErg137aaKJpfygRw
Paypal donations: omul-andrei@protonmail.com
Bitcoin dontations: bc1q9qgjlt7x2yt6uvv869qjyd4nsuz8nhxkg3ck73
Etherium dontations: 0x2B5B713491c2D83889d546C31C115548c642d070 |
No Rating |
Product Version: Unknown
524 Downloads
|
|
|
 |
Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb. Parameters include options for 5 finishes and 15 glass options. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
6626 Downloads
|
|
|
 |
The Ikea Domsjo Apron Sink. This is the most affordable apron (farmers) double bowl sink I could find for my kitchen remodel. Needed exact dimensions for creating a custom cabinet around it. Critical dimensions are accurate in regard to placement in a cabinet. Other items like the strainer holes, edges of the sink, and slotted drains along back could use some polishing, but seem to get the idea across.
|
|
Product Version: Revit Architecture 2011
3280 Downloads
|
|
|
 |
Nested door having 1 wooden door cum window frames & 4 door panel choice. Wooden frame can be single or double rebate. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame) arroun multi lites, who's width can be zero if you do'nt need it. etc. etc. By adding param of Left or/& Right window with one can win frame also . No leaves are added in window frames to avoid the heavy size of the family. Lallan Ji
No Rating |
No Rating |
Product Version: Revit Architecture 2018
550 Downloads
|
|
|
 |
MIFAB® Series MI-O-HU ____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). Unit comes complete with integral holding tank for additional waste oil storage. |
No Rating |
Product Version: Unknown
279 Downloads
|
|
|
 |
SERGIO Ansa Double Bowl Double Drainer
Overall Measurements: 1180x480mm
Bowl 1:330x380x170mm
Bowl 2: 330x380x170mm
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: -
Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
No Rating |
Product Version: Revit Architecture 2011
2974 Downloads
|
|
|
 |
AGRV_GENM-SPCQ_FloodControlGate-Double_防水閘門-雙
Flood Control Gate in basement driveway entrance in Taiwan (Double swing) with DIM & Material parameters and dimension Guide
I also add a void box so you can easyly insert it in a wall
Visit our website AgileRevit.com for more families |
No Rating |
Product Version: Revit Architecture 2018
329 Downloads
|
|
|
 |
MIFAB® Series MI-O sanitary powder epoxy coated inside and outside fabricated 10 gauge steel oil interceptor. Unit to include:
sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated non skid rectangular lid. |
No Rating |
Product Version: Unknown
71 Downloads
|
|
|
 |
MIFAB® Series MI-E-O____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.
Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). |
No Rating |
Product Version: Unknown
50 Downloads
|
|
|
 |
MIFAB® Series MI-E-O____ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.
Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). |
No Rating |
Product Version: Unknown
46 Downloads
|
|
|
 |
MIFAB® Series MI-E-O-HU__ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.
Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). |
|
Product Version: Unknown
122 Downloads
|
|
|
 |
Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb. Parameters include options for 5 finishes and 15 glass options. Manufactured by Holtkötter. |
No Rating |
Product Version: Revit Architecture 2011
11519 Downloads
|
|
|
 |
Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb. Parameters include options for 5 finishes and 15 glass options. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
8584 Downloads
|
|
|
 |
Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb. Parameters include options for 4 finishes and 4 glass options. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
9755 Downloads
|
|
|
 |
Series LF1170, LFL1170 Lead Free* Hot Water Temperature Control Valves are specifically designed for mixing hot and cold water on hot water supply systems. They can be used for a variety of applications to reduce the temperature of the hot water from the system, and are ideal for radiant heat applications. This series features a "double throttling" design which combines the control of the hot and cold water to provide a sensitive response to changes in water temperature passing through the mixing chamber. The LF1170 can be set to any temperature between 90°F and 160°F (60°F and 120°F for model LFL1170-M2) with flow rates as low as 0.5 gpm and as high as 23 gpm. The superior flow characteristics of this valve provide accurate temperature control to the requirements of ASSE 1017 across the rated flow range. These valves also provide additional safety as they restrict mixed water out to a drip upon loss of cold water supply to the valve. As an added feature, the LF1170, LFL1170 series incorporates integral check valves and filter washers in both the hot and cold water inlets to protect against cross flow. Available with threaded (-UT), solder (-US), PEX Quick-Connect (-QC) or CPVC connections. Maximum Pressure: 150psi (10 bar). Consisting of Lead Free* cast copper silicon alloy body construction. |
|
Product Version: Revit MEP 2014
596 Downloads
|
|
|
 |
Here are two Viewports:
1. Viewport Std. - with following Type Parameters:
a. Title – View Title.
b. Show Title – Yes.
c. Show Extension Line – Box checked.
2. Viewport W/ Box - with following Type Parameters:
a. Title – View Title- Detail Box.
b. Show Title – Yes.
c. Show Extension Line – Box not checked.
Place Detail Boxes: using place a drafting view as the example.
1. Load the View Title-Detail Box and Detail Box into a project.
2. Create a drafting view “DOOR FRAME” for example and drag onto a sheet.
3. Click that detail, in the Properties window, click the down arrow on the right, two Viewport types will be shown. Click “Viewport W/ Box”. Double click the detail to activate that View, on the bottom of the option bar selecting the proper scale.
4. Now placing the Detail Box, in the Project Browser, under “Family”/ “Annotation Symbols”, click “Detail Box” and expand the family types, select 3x3 for example, drag and place it to the right location on the sheet using the grid marks on the border or the invisible grids on the sheet, then drag the “DOOR FRAME” detail into the detail box, then drag the detail title to the correct location.
5. If the detail box type for example 8x10 is not on the list, you can select any type such as 3x3, click it then in “Type Properties” using “Duplicate” to create the new type “8 X 10”, then in the “Type Parameter”, “Other”, in the Row X, click 3, then an up/down arrow will be shown on the right, using it to change to 8, then do the same for the Y, now you have the Type 8 X 10.
Sorry, haven't upload for a while. The site said that I can upload 10 files maximum, I had upload only two of three, the image file and the empty box family, and don't know why the View Title didn't upload.I tried again and no avail. I have to create another new upload for the View Title. |
No Rating |
Product Version: Revit Architecture 2015
4455 Downloads
|
|
|
 |
This is a face based family (Rafter Anchor). Use the vertical face to place it (i.e. the vertical side of the double top plates) and then just align (AL) with the rafter.
If you benefit from it please subscribe to my channel https://www.youtube.com/channel/UCJZt58oErg137aaKJpfygRw
Paypal donations: omul-andrei@protonmail.com
Bitcoin dontations: bc1q9qgjlt7x2yt6uvv869qjyd4nsuz8nhxkg3ck73
Etherium dontations: 0x2B5B713491c2D83889d546C31C115548c642d070 |
No Rating |
Product Version: Unknown
307 Downloads
|
|
|
 |
Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb. Parameters include options for 4 finishes and 4 glass options. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
9703 Downloads
|
|
|
 |
Download: http://metawell.bimobject.com/Metawell_KD-F_EN_1
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
Metawell® jointless ceilings consist of aluminium sandwich panels, and because of the aluminium and copper used offer greater performance and a high response speed. The unusually lightweight support panel is very bending-resistant. Therefore, the grid dimension of the substructure can be double that of plasterboard panels. |
|
Product Version: Unknown
3781 Downloads
|
|
|
 |
An unnecessarily parametric curtain family. This was more of an exercise as opposed to something practical.
The curtains can be parametrically opened and closed through a slider in plan view. In order to do this it took calculous, trigonometry, and numerical methods to pull off. It is a little computationally heavy on the model.
Parameters include:
Materials, Curtain length/width/thickness, rod length/diameter, wall offset, grommet diameter/spacing, left/right/double curtains. |
|
Product Version: Unknown
20327 Downloads
|
|
|
 |
An unnecessarily parametric curtain family. This was more of an exercise as opposed to something practical.
The curtains can be parametrically opened and closed through a slider in plan view. In order to do this it took calculous, trigonometry, and numerical methods to pull off. It is a little computationally heavy on the model.
Parameters include:
Materials, Curtain length/width/thickness, rod length/diameter, wall offset, grommet diameter/spacing, left/right/double curtains. |
|
Product Version: Unknown
8793 Downloads
|
|
|
 |
Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb. Parameters include options for 4 finishes and 4 glass options. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
5642 Downloads
|
|
|
 |
Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb. Parameters include options for 5 finishes and 15 glass options. Manufactured by Holtkötter.
|
|
Product Version: Unknown
4867 Downloads
|
|
|
 |
Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb. Parameters include options for 5 finishes and 15 glass options. Manufactured by Holtkötter.
|
|
Product Version: Revit Architecture 2011
4570 Downloads
|
|
|
 |
Download: http://ersa.bimobject.com/ers_cha_twi
This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software
Revit app: http://info.bimobject.com/revit-app
Single and double seating units may be used as guest chairs in manager offices in addition to waiting areas. Single Twins chair with its structure consisting of 2 symmetrical components gently flexes according to the body weight of the user and provides comfort by form-fit. |
|
Product Version: Unknown
5684 Downloads
|
|
|
 |
Elegantly designed and streamlined, these wall sconces feature high-quality French glass and are equipped with a double-ended, tubular, halogen bulb. Parameters include options for 6 finishes and 5 glass options. Manufactured by Holtkötter. |
|
Product Version: Revit Architecture 2011
10727 Downloads
|
|
|
 |
This is the finished Facility Occupancy Load Schedule and Egress Plan. This is automated to calculate the occupant load based on the type of area then use that to calculate occupant load.
There are 2 tags. 1 for rooms, 1 for egress doors.
There are 4 schedules
1. DOOR EGRESS SCHEDULE
2. FACILITY OCCUPANCY SCHEDULE
3. ROOM OCCUPANCY COMPARE SCHEDULE
4. SPACE OCCUPANCY CLASSIFICATION
There is one sample Model.
Steps:
1. Copy the schedules and tags to your current project.
2. Open the Room occupancy compare schedule
3. Select what type of area you see fit.
4. Type in 0 sf for “NON CALCULATED ROOM AREA” to calculate occupants
5. Manually type in tag value to match calculation to populate the room tag.
6. Place the facility schedule on the code plan sheet.
7. Place the Door egress schedule on the sheet too.
8. Place all your room tags
9. Place your egress door tags on 1 exit way door only per egress area
10. Make a note of how you want to number your egress areas. ( I usually go clockwise from upper left to lower right)
11. Fill in the Egress area for each room in the properties field. ( You can multiple select rooms at the same time and type in the value for all at once, use your filter)
12. The Facility Schedule will populate.
13. Type in the Occupant value to the Door egress schedule. Make sure they match. Hide Door egress schedule.
You’re done. Or pretty close J #JustinDesigns3D JustinDesigns3D@Gmail.com |
|
Product Version: Unknown
4015 Downloads
|
|
|
 |
SERGIO Ansa Double Bowl Single Drainer
Overall Measurements: 1380x480mm
Bowl 1: 330x380x170mm
Bowl 2: 330x380x170mm
Material: 304 Grade Stainless Steel
Gauge: 0.8mm
Internal Bowl Radius: -
Suppliedwith: 2 x Basket Waste and Overflow Kits, Sealing Tape, Fixing Clips
FREEPHONE: 0800 222 764
WEB: www.cabro.co.nz
EMAIL: info@cabro.co.nz
The Cabro Group Ltd – your supplier of kitchen sinkware and componentry, specializing in our signature brand SERGIO.
|
|
Product Version: Revit Architecture 2011
4340 Downloads
|
|
|
Search