 |
Series 757DCDA, 757NDCDA Double Check Detector Assemblies prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. Compact housings consist of two independently operating tri-link check valves, two shutoff valves, and four test cocks. They feature a stainless steel housing and sleeve and are 70% lighter than traditional designs. Series 757, 757N is designed for non-health hazard applications and may be installed under continuous pressure service to protect against both backpressure and backsiphonage. This Series is used primarily on fire sprinkler lines when it is necessary to monitor unauthorized use of water. Maximum Working Pressure: 175psi (12.06 bar). |
No Rating |
Product Version: Revit MEP 2014
569 Downloads
|
|
 |
Revit 2022
door family with varrying panels of that style which can be switched with a family type parameter.
Parameters include:
- Width
- Height
- Frame Thickness
- Thickness (door)
- Center Rail Height
- Top Rail Width
- Center Rail width
- Side rail width
- Bottom Rail Width
- Trim Width
- Trim Thickness
- Handle Height
- Handle Inset
- New (instance)
- Existing (instance)
- Undercut (instance)
- Deadbolt On/Off (instance) |
No Rating |
Product Version: Unknown
1361 Downloads
|
|
|
 |
Works fine in Curtain Wall |
|
Product Version: Revit Architecture 2013
71771 Downloads
|
|
|
 |
Metal framed gate with vertical metal tube pickets and decorative cross brace. |
|
Product Version: Revit Architecture 2011
32787 Downloads
|
|
|
 |
Updated previous Revit city Model. Width, Height, Glass Thickness, Frame Width, Handle Ht, are all adjustable. |
No Rating |
Product Version: Revit Architecture 2019
9257 Downloads
|
|
|
 |
The BEECO Friendly Double Check Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed. |
No Rating |
Product Version: Unknown
298 Downloads
|
|
|
 |
Front door made at NOHS. |
|
Product Version: Unknown
13474 Downloads
|
|
|
 |
Flush - uneven - no trim |
|
Product Version: Unknown
3297 Downloads
|
|
|
 |
|
No Rating |
Product Version: Revit Architecture 2010
1561 Downloads
|
|
|
 |
|
No Rating |
Product Version: Revit Architecture 2010
2586 Downloads
|
|
|
 |
The BEECOFriendly Double Check Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed. Certified lead free devices. |
No Rating |
Product Version: Unknown
428 Downloads
|
|
|
 |
A detail component to assist in equally distributing objects across a distance (like windows or doors in a wall). |
No Rating |
Product Version: Revit Architecture 2020
222 Downloads
|
|
|
 |
|
No Rating |
Product Version: Revit Architecture 2010
1876 Downloads
|
|
|
 |
|
No Rating |
Product Version: Revit Architecture 2010
1782 Downloads
|
|
|
 |
|
No Rating |
Product Version: Revit Architecture 2010
1918 Downloads
|
|
|
 |
|
No Rating |
Product Version: Revit Architecture 2010
2487 Downloads
|
|
|
 |
Typical ER/Commercial slingin electric eye entrance door. Parametric overall width and door panel size. |
|
Product Version: Revit Architecture 2009
11561 Downloads
|
|
|
 |
This is a fully parametric grouping of Marvin's Clad Ultimate Fixed window family, including interior trim. |
|
Product Version: Revit Architecture 2014
9538 Downloads
|
|
|
 |
MORE FAMILIES // DOWNLOAD AT CREATIVEROUTE.COM
|
|
Product Version: Revit Architecture 2015
3791 Downloads
|
|
|
 |
Here is a two door cabinet wall mounted with glass(Thomasville line) modeled by Team RPM |
No Rating |
Product Version: Unknown
12339 Downloads
|
|
|
 |
MIFAB® Series MC-28 lacquered cast iron 90º double no hub stack fitting with 4” (102) no hub waste, 2” (51) no hub center vent connection and anti-crossover baffles for floor mounted back outlet water closets. |
No Rating |
Product Version: Unknown
33 Downloads
|
|
|
 |
|
No Rating |
Product Version: Revit Architecture 2010
800 Downloads
|
|
|
 |
Fully parametric - can modify the mullion numbers both vertically and horizontally, as well as thier visibility all together. The exterior trim can be turned off and on and both the exterior and interior trim widths can be modified independently. |
|
Product Version: Revit Architecture 2009
4647 Downloads
|
|
|
 |
This was created using the craftsman window originally created by JRoth as the base. |
No Rating |
Product Version: Revit Building 9.1
4973 Downloads
|
|
|
 |
This is a fully parametric sink with shared faucet and drains. |
|
Product Version: Revit Architecture 2013
66947 Downloads
|
|
|
| |
Exterior decorative site light fixture |
No Rating |
Product Version: Revit Architecture 2008
3464 Downloads
|
|
|
 |
This is a double door using the sliding barn door hardware. This is a basic family, but it works well. You can change the door width and height through the types. I based this loosley on the Real Carriage DoorCo. Swiss Rod
BASED ON malfonsi VERSION W/ OFFSET AND TRACK LENGTH PARAMETERS
ALL CREDIT GOES TO malfonsi |
|
Product Version: Revit Architecture 2018
4928 Downloads
|
|
|
 |
Fully parametric - can modify the mullion numbers both vertically and horizontally, as well as thier visibility all together. The exterior trim can be turned off and on and both the exterior and interior trim widths can be modified independently. |
|
Product Version: Revit Architecture 2009
3753 Downloads
|
|
|
 |
This is a stylistic modification of something I downloaded a few months ago. We're starting to give our clients "virtual tours" of what their spaces can look like, and there is a lot of demand for kitchen cabinets to look similar to those that they have chosen from magazines. So these are the farmhouse style. |
|
Product Version: Unknown
19822 Downloads
|
|
|
 |
this is a 40mm casement window modeled off the Vantage profile, all elements are extruded profiles right down to the neoprene seals, this file is quite large but excellent for showing that extra detail in your project. I think i've managed to iron out all the kinks, and yes this window is parametric. |
|
Product Version: Revit Architecture 2010
63458 Downloads
|
|
|
Search