A box to place over windows and doors

Product Version: Unknown

961 Downloads

Bangladeshi Doors

No Rating

Product Version: Revit Architecture 2014

171 Downloads

Fully parametric closet with 3 dors and an open shelf wich has a visibility parameter (you can show the shelf or hide it with a check box).

There are material parameters included. A super useful feature is grips to control the widths, cause in my eperience these will vary from closet to closet, whilst the other parameters like height and depth can be standardized.

Theres some funny reactions going on with the open shelf if you change the footguard height or the handle height. Other than that, it works perfectly.

Product Version: Revit Architecture 2016

55196 Downloads

Series 757 Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. For unmatched versatility, assemblies are available for horizontal, vertical, or N pattern installations while groove connections allow ease of installation and pipe alignment. Patented tri-link check assemblies are also designed for easy serviceability. A variety of shutoff valve options are offered.

No Rating

Product Version: Revit MEP 2014

835 Downloads

Majesta Double Hungs are Kolbe's newest product.All units are custom made-to-order, therefore there are no standard sizes.• Maximum frame size: 6’ x 12’• Minimum frame size: 3’-6” x 6’-5”• Minimum basic jamb size: 6-9/16”• Other size limitations may apply, depending on the options chosen• Sash: nominal 2-1/4” thick• Spiral balance system• Concealed jambliners• Standard locking hardware: innovative pin style lock at the top of the top sash and bottom of the bottom sash; no checkrail locks as standard• Sash are removable, but do not tilt-in• Triple insulating glass available!

No Rating

Product Version: Revit Architecture 2010

958 Downloads

Aluminum and tempered glass window showing handles. All dimensions and materials parametrized. Metric.

Product Version: Revit Architecture 2008

44072 Downloads

two medium sized lockers stacked vertically

No Rating

Product Version: Revit Building 5.1

10093 Downloads

Nested door having 2 door frames & 4 door panel choice. Wooden frame can be single or double rebate. Most params are Shared Parameters. If you do'nt need ventilator- simply set the vent Ht to zero. Solid flush door can be conveted to stile n rail panel door by using mould thickness. Multi lite door can be 1V x1H to 10v x 4H lites of glass or other solid material. There is a extra frame(2ndry frame)  arroun multi lites, who's width can be zero if you do'nt need it by setting Stile panel offse and rail panel offset to zero. Each & every elements have seperate material params. etc.  etc. One can make more than 100 types of doors with this . Contriver Lallan Ji

No Rating

Product Version: Revit Architecture 2013

1826 Downloads

Decent foyer doors. Fully parametric.

Product Version: Revit Structure 2011

18392 Downloads

This is a gate that has corrugated metal sheathing and is meant to be placed in a wall.  Width and height are adjustable in the Type Parameters.  (6', 8', 10', and 12' widths)

Product Version: Revit Architecture 2009

19551 Downloads

Fully adjustable

No Rating

Product Version: Revit Building 9

2744 Downloads

Series 719 Double Check Valve Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements. They have a bronze alloy body construction and chloramine resistant elastomers. Series 719 features a separate access, top-entry check valve design for ease of maintenance and is for use at referenced cross-connections in non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

312 Downloads

Families of Doors

Family changes and 2010 update 5/16/09 See Notes.

Product Version: Revit Architecture 2010

14049 Downloads

parametric 2 doors loosely based on Fisher and Paykel

No Rating

Product Version: Revit Architecture 2010

4188 Downloads

Two story chimney that automatically creates into the wall. The Materials are changable from the elements properties. Let me know what you think. rate please

Product Version: Revit Architecture 2010

3033 Downloads

Iron dbl gate between two decorative columns.
Parametric.

Product Version: Unknown

58913 Downloads

No Rating

Product Version: Revit Architecture 2019

1950 Downloads

Product Version: Revit Architecture 2019

1758 Downloads

The hollow metal frame will wrap around the wall and will automatically adjust to the wall width.

Product Version: Revit Architecture 2011

6176 Downloads

 THIS IS A DOOR W/ SOLDIER COURSE AROUND 3SIDES AND A KEYSTONE @ TOP CENTER

Product Version: Unknown

8492 Downloads

Here is a two door cabinet wall mounted with lower drawers(Thomasville line) modeled by Team RPM

No Rating

Product Version: Unknown

9716 Downloads

two large lockers arranged horizontally

Product Version: Revit Building 5.1

9469 Downloads

Series LF709 Lead Free* Double Check Valve Assemblies prevent the reverse flow of polluted water from entering into the potable water supply. They have a modular check design for easy maintenance and epoxy coated (FDA approved) cast iron body construction. Series LF709 is ideal at referenced cross-connections identified in non-health hazard applications. The LF709 features Lead Free* construction to comply with Lead Free* installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

354 Downloads

Wooden Window

Changeable Sizes

Changeable Material

No Rating

Product Version: Revit Architecture 2013

1150 Downloads

Series 774DCDA Double Check Detector Assemblies prevent the backflow of fire protection system substances from being pumped or siphoned into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body, thermoplastic and stainless steel check valves, and low head loss. Series 774DCDA can be installed in the horizontal or vertical flow-up positions. It is designed for installation on applications identified by local authorities as non-health hazard, such as on fire protection systems. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

608 Downloads

Loosely based on Andersen Windows products. Flexes within certain limits. Mutins created as separate families and do not flex but can be edited and inserted.

Product Version: Revit Architecture 2008

22275 Downloads

33 12 13.13 CSI Classification

4" Backflow Preventer DCV Assembly based on WATTS 909 NRS

Product Version: Unknown

4632 Downloads

Series LF719 Double Check Valve Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements. They have a Lead Free* cast copper silicon alloy body construction and chloramine resistant elastomers. Series LF719 features a separate access, top-entry check valve design for ease of maintenance and is for use at referenced cross-connections in non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

132 Downloads

Doubled panel window and then  fully parameric and we can control swing angle too

Product Version: Revit Architecture 2017

2690 Downloads

Face or Work-Plane based Computer Monitor. Change height with "Properties Menu--> Constraint --> offset." Revit 2014 version.

No Rating

Product Version: Unknown

17400 Downloads