MASS truAIR Drying Cabinet Storage and Protection for 9 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 9 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 9 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/9-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

219 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 8 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 8 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 8 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/8-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

161 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 4 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 4 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 4 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/8-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

124 Downloads

No Rating

Product Version: Unknown

22 Downloads

No Rating

Product Version: Unknown

18 Downloads

No Rating

Product Version: Unknown

16 Downloads

No Rating

Product Version: Unknown

24 Downloads

MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.

Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.

Air Supply: High flow rate channel drying with 6LPM per scope.  Self-contained air system.  Two years maintenance-free continuous use compressor

Materials: Powder coated metal, rust-proof and anti-microbial

Scope Hooks: stores 18 flexible endoscopes

Reusuable Drying Connectors: including Auxiliary Water

Padded Lower Wall: distal tip protection

Door: locking glass door

Ventilation: MASS truHEPA filtered air

Air Manifold: quick disconnect for 18 connectors

Removable Drip Tray

Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube

Pre-Cut Mounting Slots: simplifies the installation process

Notched Cabinet Base: flushed fit for coved flooring

Visit MASS Medical Storage for more information and accessories

http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/

Downloadable File for Revit Architecture 2022 and up

No Rating

Product Version: Unknown

175 Downloads

Download: http://metawell.bimobject.com/Metawell_KD-F_EN_1

This is an example of one of the many objects available from this manufacturer on the BIMobject Cloud. Click on the link to find so many more objects which are free for all designers from around the world to use. We also have an amazing app which enables you to access our complete library directly from within your BIM software 

Revit app: http://info.bimobject.com/revit-app 

Metawell® jointless ceilings consist of aluminium sandwich panels, and because of the aluminium and copper used offer greater performance and a high response speed. The unusually lightweight support panel is very bending-resistant. Therefore, the grid dimension of the substructure can be double that of plasterboard panels.

Product Version: Unknown

3777 Downloads

MINIREEF BOLLARD

Art. S.5240W 1 MODULES COB 3000K  220-240Vac 1740lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1090lmRated input power: 16.8WLuminaire efficacy: 65lm/WPower supply Dimmable  DALI 2 / PUSH CELUMINAIRE TYPEBollard fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) and extruded EN AW-6060 with high resistance against corrosion. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 10LIGHTING PERFORMANCE99.98% pure anodized aluminium reflector. Polycarbonate lens  transparent  with controlled downward light emission for avoiding any glare, UV-stabilised and vandalproof . Lamp  fixed position . INSTALLATION AND MAINTENANCEGarden mounted fixtures are to be installed and used with the ground stake accessory or cemented root flange. These cannot be installed directly to the ground or cement bases without the relative accessories because the contact between the two different materials may lead to an accelerated process of oxidation of the fixture. WIRINGDouble cable entries with grommets. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), BURNISHED BRONZE (cod.20). Weight: 6.13 Kg Glow Wire test: 850°CLED circuit included.This luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

478 Downloads

CATCH SQUARE 4LED

Art. S.7406W 4 MODULES LED 3000K  220-240Vac 620lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 415lmRated input power: 7.8WLuminaire efficacy: 53lm/WElectronic ballast  DALI 2 / PUSH CELUMINAIRE TYPEFalse ceiling-recessed down-light fitting. IP rating IP 65MATERIAL CHARACTERISTICSAluminium die cast housing in EN AB-47100 (low copper content) with high resistance against corrosion. Stone wash surface treatment prior to painting process. Aluminium front trim or Marine grade stainless steel AISI 316L front trim. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 08LIGHTING PERFORMANCEThe led chips are positioned inside specific cowels and are not visible therefore resulting in excellent visual comfort and antiglare characteristics. Toughened  transparent  glass 5mm thick. Lamp  adjustable ±20° position. LOR -- INSTALLATION AND MANTEINANCEThe luminaires are fixed to the falseceiling by a heavy-duty bracket system, adjustable. WIRINGLuminaire hard wired with 0.4m H05RNF cable, supplied with IP67 connector . Isolation: CLASS II . Available colours: Stainless steel (cod.19). Weight: 1.84 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2019

199 Downloads

• This coffee table comes 1/2 inch glass top with beveled edge


• Wood frame is emphasized by S shape 


• Table legs and s shape glass support are made of chrome steel finish


• Dimensions: Coffee Table L 47" x W 25"x H 18"

No Rating

Product Version: Revit Architecture 2012

4936 Downloads

MINISTAGE ROUND SPOT

Art. S.1315W1 MODULES COB 3000K  220-240Vac 1225lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1040lmRated input power: 11.2WLuminaire efficacy: 93lm/WElectronic ballast  ON/OFF not dimmable CELUMINAIRE TYPEProjector. IP rating IP 66MATERIAL CHARACTERISTICSDie-cast EN AB-47100 aluminium housing with high corrosion resistance.Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Silicone gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 07LIGHTING PERFORMANCE99.98% pure aluminium reflectors, or with concentrating lenses: The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source. Clear toughened glass. LOR -- INSTALLATION AND MAINTENANCEThe tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away. WIRINGSupply 5m cable section type FEP/FEP + PCP (Microstage and Ministage) or FLAT (Stage and Megastage) sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 1.73 Kg Glow Wire test: --LED circuit included.REGISTERED DESIGN MICROSTAGE BLADE OF LIGHT PATENTED, REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

2315 Downloads

• This end table comes 1/2 inch glass top with beveled edge


• Table legs and s shape glass support are made of chrome steel finish


• End tables L 31" x W 24" x H 19"

Product Version: Revit Architecture 2012

2102 Downloads

The Emily Wing Chair provides a crisp clean design whilst still provide excellent levels of comfort and support for users making it ideal for care homes, nursing homes, hospices and housing associations. Some of the key benefits include removable seat cushion for easy cleaning and reversible cushions reduce fabric wear. Padded arms and wings offer additional comfort and is Ergonomically designed to aid good posture.

Pay us a visit at Knightsbridge Furniture

(Created in Revit 2014)

Product Version: Unknown

18864 Downloads

Our Henley range has specifically Designed arms to aid easy rising. With a timber trim to back which reduces fabric wear. Available in Natural Beech, Bleached Beech, Oak, Cherry, Walnut and Wenge stains as standard, plus customers own stains. Available in our large range of standard fabrics or client specified.

Hygiene gap prevents trapping of dirt and bacteria between the seat and back with stretcher rails to provide added strength.Supportive high back provides extra support.

Pay us a visit at Knightsbridge Furniture

(Created in Revit 2014)          

Product Version: Unknown

2419 Downloads

Contents:

Cabinet with  doors

• Dimensions are parametric, depth, height, width, handle placement


• Materials: cabinet, door, handle

Cabinets Drawers

• up to five drawers with visibility


• dimensions are parametric; depth, height, width, drawer height


• drawers automatically drop down 5 mm under the above drawer this is fixed at the moment a new version might get this dynamic.


• Materials are parametric

Plinth

• Parametric dimensions (instance) material parameter.

Worktop L shape (with/without sink)

• Lengths, depths, heights, and thickness all instance parametric

Worktop I shape (with/without sink) Lengths, depths, heights, and thickness all instance parametric

Misc parts face based

1. Stove electric: fixed dimensions, parametric materials (4 or 5 cooking pits with visibility parameter)


2. coffee machine based upon Phillips Coffee pad machine: fixed dimensions, parametric materials


3. coffee mug: fixed dimensions, parametric materials


4. Microwave; fixed dimensions, parametric materials


5. faucet: fixed dimensions, parametric materials based upon an old Sphinx one

Misc generic model

1. Sink: parametric (instance) dimensions and height based upon floor height.

For any qeustions, 'bugs' etc. contact me by personal message

disclaimer: first family, some stuff might seem odd but strangely it works, next version will probably tone down on the parameters a bit.

Notice: Everything under constraints is calculated and should be left alone.

standard sizes based upon measurements from the netherlands, but can be adjusted to match your own.

Need another Revit version? Sadly Revit doesn't support saving back to previous versions. I can, however, create an IFC which can be imported. This might break the information contained within. Rendering the model useless. I'm sorry for this.

No Rating

Product Version: Revit Architecture 2016

3147 Downloads

Our Millie  is a Coordinating range of seating and features clubs, easy chairs and upright seating. The Shaped back adds comfort and support. Some of it's features include; Reversible seat cushions to  reduce fabric wear, elegant shaped legs and Showwood arm detail also to reduce fabric wear. Available in Bleached Beech, Cherry, Natural Beech, Oak, Walnut and Wenge.A large range of standard fabrics, including vinyl to help infection control or in client specified.(Visit website for full range. More models to follow)

Pay us a visit at Knightsbridge Furniture

(Created in Revit 2014)

Product Version: Unknown

11760 Downloads