|
|
Search Downloads
Search Results
 |
This Light is Fully Parametric. It is not hosted. Change parameters, High of ceiling, Cable Length, Pendant Length and Pendant Radius. The part witch attaches to the Ceiling can all so be angled to match the slop of the ceiling. This is done by entering a number with inches over 12" (ex. for a 4/12 slope enter 4")
The light is made by Delray Lighting Inc.
A 2014 version can be found here.
Hope you like it,
smh |
|
Product Version: Revit Architecture 2015
24522 Downloads
|
|
 |
MIFAB Series MI-G-SD ____ sanitary acid resistant, powder epoxy coated inside and outside fabricated 10 gauge steel hydro mechanical grease interceptor with flow rating of ____ (indicate) and grease holding capacity of ____ (indicate). Unit shall include:
removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, internal grease retention tray adjacent to grease draw-off valve and steel acid resistant, powder epoxy coated, non skid, rectangular gasketed lid(s). |
No Rating |
Product Version: Unknown
195 Downloads
|
|
|
 |
MIFAB® Series MC-40 floor mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware. |
No Rating |
Product Version: Unknown
26 Downloads
|
|
|
 |
MIFAB® Series MC-40 floor mounted exposed arm lavatory carrier with white, lacquered, adjustable, cast iron exposed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware. |
No Rating |
Product Version: Unknown
15 Downloads
|
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 18 flexible endoscopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying with 6LPM per scope. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Scope Hooks: stores 18 flexible endoscopes
Reusuable Drying Connectors: including Auxiliary Water
Padded Lower Wall: distal tip protection
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Air Manifold: quick disconnect for 18 connectors
Removable Drip Tray
Center Separator Scope Rack: minimize risk of overlapping umbilical and insertion tube
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
http://www.massmedicalstorage.com/endoscopy-storage/18-scope-hepa-grade-drying-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
532 Downloads
|
|
|
 |
MIFAB® Series MC-41 floor mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, adjustable steel nipples with locknut and set screws, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
29 Downloads
|
|
|
 |
MIFAB® Series MC-41D-R floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms.
|
No Rating |
Product Version: Unknown
40 Downloads
|
|
|
 |
MIFAB® Series MC-41D-R floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms.
|
No Rating |
Product Version: Unknown
19 Downloads
|
|
|
 |
MIFAB® Series MC-21 floor mounted single, horizontal, adjustable, water closet carrier without fitting, 4” (102) back outlet waste connection (specify no hub or threaded), lacquered cast iron adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
25 Downloads
|
|
|
 |
MIFAB® Series MC-12-HS single, vertical, adjustable, hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
38 Downloads
|
|
|
 |
MIFAB® Series MC-12 single, vertical, adjustable, water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
49 Downloads
|
|
|
 |
MIFAB® SUPER-MAX gravity grease interceptor has a limited lifetime warranty and is made in the U.S.A. out of seamless, rotationally molded High Density Polyethylene with 3/8” uniform wall thickness. Interceptor is designed for above or below ground installation and includes an adjustable lid system, sample port access, internal baffle, deep seal trap covered by lid, internal air relief by-pass, stainless steel calibrated orifice plate (internal flow control), base for support and floor level installation and 4″ no hub inlet and outlet connections. Steel encased composite lids provide a water / gas tight seal and have a minimum of 20,000 LB. load capacity – in accordance with the loading requirements of AASHTO H20. The high density polyethylene material is PE 3135 from Dow 9.39 with a density of 0.939 g/cm3. The -PDI model is tested and certified to the PDI G-101 Standard, 100 GPM flow rate. For indoor/outdoor use. |
No Rating |
Product Version: Unknown
279 Downloads
|
|
|
 |
MIFAB® Series MC-10-HS (Specify -L for left or -R for right design) single, horizontal, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
34 Downloads
|
|
|
 |
MIFAB® Series MC-13-HS single, vertical, adjustable, hub and spigot water closet carrier with lacquered cast iron fitting, left, right or both (specify) 4” (102) side inlets, 2” (51) vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
22 Downloads
|
|
|
 |
MIFAB® Series MC-10-EXT (Specify L for left or R for right design) single, horizontal, adjustable, high rough-in water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support |
No Rating |
Product Version: Unknown
26 Downloads
|
|
|
 |
MIFAB® Series MC-10-27-37 (Specify L for left or R for right design) single, horizontal, adjustable, water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
20 Downloads
|
|
|
 |
MIFAB® Series MC-15 single, vertical, fixed, water closet carrier with offset lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support. |
No Rating |
Product Version: Unknown
15 Downloads
|
|
|
 |
MIFAB Series MI-HEL ____ helicopter port fuel interceptor constructed from high-strength 1/4” (6) plate steel, ASTM-A242, outlet vent connection, internal vent connection, gasketed access covers fastened with stainless steel bolts, 2” (51) fuel drain connection, 1” (25) fresh water supply connection with gate valve, back flow preventer, automatic water level float valve, external sight glass water level indicator with drain cocks, 2” (51) interceptor drain plugs, channel support rails and body corner lifting lugs. Interceptor shall be coated with a two-part epoxy interior and exterior coating. |
No Rating |
Product Version: Unknown
138 Downloads
|
|
|
 |
AGRV-HRAL_SeriesB-Hang-Handrail Metal & Glass Railing
# Side mounted(Hang) railing
# Round glass pin
We proivde 2 type of Railing in RVT : H120,H150
We also create a Baluster using the railing support familt, so you can place it manully.
Visit our website AgrvArchitect.com for more families
Because the rvt file is too big, so I put the file in here :
https://drive.google.com/file/d/1WmspEAEBWCOp3bQo8pejJEKKaX2DvNDJ/view?usp=sharing
|
No Rating |
Product Version: Revit Architecture 2018
1126 Downloads
|
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 4 small scopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Removable Drip Tray
Small Scope Rack
Center Separator Scope Rack
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
170 Downloads
|
|
|
 |
MASS truAIR Drying Cabinet Storage and Protection for 8 small scopes.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure through each endoscope lumen at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Removable Drip Tray
Small Scope Rack
Center Separator Scope Rack
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
214 Downloads
|
|
|
 |
I bring you today the iconic Panton Bachelor Chair. Revit 2017.
Want to see the making of this family? https://www.youtube.com/watch?v=_CrgSlgyACE&t=10s
Feel free to use this family for personal or commercial uses.
Your support is appreciated: https://www.patreon.com/user?u=4579022 |
No Rating |
Product Version: Unknown
464 Downloads
|
|
|
 |
MIFAB® Series MC-40D floor mounted exposed arm lavatory carrier with back to back white, lacquered, adjustable, cast iron exposed support arms.
Complete with back to back lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” x 1” x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and mounting hardware. |
No Rating |
Product Version: Unknown
16 Downloads
|
|
|
 |
OVER-ALL
Art. S.1910W 9 MODULES LED 3000K Max. 700mA 1755lm CRI 90 MacAdam step 3Rated luminaire luminous flux: 1569lmRated input power: 20.2WLuminaire efficacy: 78lm/WRequires remote ON-OFF power supply or Dimmable power supply CE - ENEC 03LUMINAIRE TYPESurface mounted up-light fitting . IP rating IP 65 IP67MATERIAL CHARACTERISTICSDie cast EN AB-47100 aluminium (low copper content) housing with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Mechanical resistance IK 08 Maximum load capacity --LIGHTING PERFORMANCEClear polycarbonate lenses. Toughened glass 5mm Micro Over-all, 6mm Mini Over-all, 8mm Over-all. Lamp fixed position. LOR -- LOW SURFACE TEMPERATURESurface temperature of glass -- (Ta 25°C)INSTALLATION AND MAINTENANCEA4 stainless steel fixing clips. Over-all is supplied with a nylon insulating fixing base and 2 special keys (necessary to remove the luminaire). Allowing direct fixation to the solid ground.WIRINGSupply 5m cable section type H07RNF sealed with B component epoxy resin, wired internally protected by silicon sheaths. Isolation: CLASS III . Available colours: Aluminium grey (cod.14). Weight: 2.13 Kg Glow Wire test: --LED circuit included.OVER-ALL REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C. |
No Rating |
Product Version: Revit Architecture 2018
492 Downloads
|
|
|
 |
MIFAB® Series MC-10 (Specify -L for left or -R for right design) single, horizontal, adjustable, water closet carrier with lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplate, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear
anchor tie down support. |
No Rating |
Product Version: Unknown
55 Downloads
|
|
|
 |
The ROBOT Storage Cabinet is designed to efficiently store 4 robotic adapters, including HEPA air filtration. Easy customizations are also available to maximize your storage needs.
Provides HEPA-filtered airflow directly into the cabinet itself and continuous positive air pressure at 99.97% filtration.
Air Supply: High flow rate channel drying. Self-contained air system. Two years maintenance-free continuous use compressor
Materials: Powder coated metal, rust-proof and anti-microbial
Door: locking glass door
Ventilation: MASS truHEPA filtered air
Removable Drip Tray
Adjustable M1295 Scope Holders and Separator Racks: stores up to 4 scopes with robotic adapters
Center Separator Scope Rack
Pre-Cut Mounting Slots: simplifies the installation process
Notched Cabinet Base: flushed fit for coved flooring
Visit MASS Medical Storage for more information and accessories
https://www.massmedicalstorage.com/product/robot-storage-cabinet/
Downloadable File for Revit Architecture 2022 and up |
No Rating |
Product Version: Unknown
162 Downloads
|
|
|
 |
MIFAB® Series MC-41D-R floor mounted back to back concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” diameter x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
33 Downloads
|
|
|
 |
Manufacturer: Santa & Cole
Designer: Hector Roqueta /Ferran Sesplugues
2005
Support made of a curved stainless steel AISI 304* tube with a polished finish. The tube has a diameter of 33 mm and plates at either end for subjection to the ground.Incorporates a clip to join both supports made of black polyamide and stainless steel AISI 304*, with a polished finish.As it is modular, this element can be combined in multiple ways.The bike rack is delivered unassembled and assembly instructions are included.It is fixed to the ground by two screws per stainless steel plate.Maintenance is not required.Weight, standard module 16 Kg. |
|
Product Version: Revit Architecture 2013
5772 Downloads
|
|
|
 |
MIFAB® Series MC-41-R floor mounted concealed arm lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” diameter x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
28 Downloads
|
|
|
 |
MIFAB® Series MC-42-R floor mounted concealed arm ADA lavatory carrier with lacquered, adjustable, ductile iron concealed support arms. Complete with lacquered cast iron invertible and adjustable arm supporting brackets, alignment rod, two lacquered 2” diameter x 1/8” thick structural steel uprights with 3” x 4 ½” welded steel feet and fixture leveling and locking hardware.
|
No Rating |
Product Version: Unknown
46 Downloads
|
|
|
|
Site Stats
Members: | 2161655 | Objects: | 23325 | Forum Posts: | 152479 | Job Listings: | 3 |
|
Search