Modern DVD Tower - Curved Vertical Panels stack up to form this center tri-core assembly. Blue DVD Panel, Black Vertical Supports and Aluminum Circular Base w/ Vertical Rod for Support.

Visit my website at http://www.4u2cdesign.com

No Rating

Product Version: Revit Architecture 2010

3046 Downloads

Fully parametric diesel day storage tank on a leg support. 

Default size is (2000x2000x1200)mm (WxDxH)

Minimum Size supported is (600x600x600)mm (WxDxH)

No Rating

Product Version: Revit MEP 2020

210 Downloads

PARK SINGLE POLE H=3500mm

Art. S.7100N20 MODULES LED 4000K  220-240Vac 6000lm CRI 80 MacAdam step 3Rated luminaire luminous flux: 4308lmRated input power: 46WLuminaire efficacy: 94lm/WElectronic ballast  ON/OFF not dimmable CE - ENEC 03LUMINAIRE TYPEPost top luminaire. IP rating IP 65MATERIAL CHARACTERISTICSExtruded EN AW-6060 aluminium profile, die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance. Stone wash surface treatment prior to painting process. A4 grade Stainless Steel screws with 2,5-3% molybdenum content which increases the resistance against corrosion. Pre treated Silicone Gaskets. Painting Process : 3 Step Process1) Surface treatment with BONDERITE. A heavy metal free chemical surface treatment containing ceramic nano particles giving a cohesive, inorganic and highly dense protective coating. 2) PRE POLYMERIZATION a process of introducing an epoxy primer with excellent characteristics to the paint which also offers very high resistance to oxidation due to its Zinc content. 3) POLYMERIZATION a process with the application of polyester powder with high resistance against UV rays and harsh weather conditions. Resistance test protection for Marine applications for 1200h. Mechanical resistance IK 09LIGHTING PERFORMANCEThe circuit is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street. PARK supplied with electronic circuit with temperature sensors for each LED to optimize the lifetime. The light distribution is in accordance with light pollution regulations. Lamp  fixed position . LOR -- POLERectangular extruded aluminum pole with inspection door. Steel zinc-plated mounting flange with stainless steel screws.WIRINGPROTECTIONS AGAINST DISCHARGES AND HIGH VOLTAGE SPIKES, Controlgear equipped with protections against discharges and high voltage spikes on the mains: 3,5kV differential mode (L-N), 4,0kV common mode (PE).Luminaire hard wired with H07RNF cable. Single cable entry with PG13,5 (Ø 6÷12 mm) cable gland in PMMA. Fast connector IP67 (Ø 6÷12 mm) supplied as standard for single cable connection . Isolation: CLASS II . Available colours: Aluminium grey (cod.14), Anthracite grey (cod.24). Weight: 36.01 Kg Glow Wire test: -- Exposed windage area : 0,394 m² ( S.7100N ) Exposed windage area : 0,440 m² ( S.7110N )LED circuit included.PARK REGISTERED DESIGNThis luminaire contains built-in LED modules. In case of damage or malfunction please contact the manufacturer to receive additional instructions on how to replace and relative spare parts to order. The LED modules cannot be handled in the luminaire by the end user.LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), where uniformity and quality of the light is 70,000 hours referred to L80 B10 Ta 25 ° C (50,000 hours referable to L80 B10 Ta 40°C). Lifespan of the luminaire > 50,000 hours at 40°C. Performance Ambient temperature Tq 25°C. Operating ambient temperature range is from -20°C to +50°C. Storage temperature range from -20°C to +60°C.

No Rating

Product Version: Revit Architecture 2018

703 Downloads

Red-Blue Chair by Rietveld

Product Version: Unknown

2753 Downloads

This is a generic model of half of a Modillion from the Corinthian order. Two mirror versions of this model adorn the modillion coursing in the bed-moulding of the Corinthian entablature. This bracket supports the eaves (sometimes coffered) and variants of this decoration also support archways (usually topped by an impost block) and consoles.

Product Version: Revit Architecture 2018

2865 Downloads

Visibility Parameter For :

1) Hatch

2)Round Supports

3)Landing Curverd Support

--------------------------------------------

Parameters:

Height

Width

Landing wall Width & Height

All materials

Fixation Distance From Wall = offset ( accepts Negative values)

For Changing Spacing between Risers or Fixation mess with the equations ;)

Any upgrades needed for the family just tell so i may be able to adjust

No Rating

Product Version: Unknown

3389 Downloads

Wall-Mounted Clothing Rod and Bracket. Height and width is adjustable. With Top Shelf and intermediate support.

Product Version: Unknown

7440 Downloads

Coalesse - Emu

The Cross collection is a collection of statuesque and meticulous design that plays on a refined combination of materials: metals to form the shapes, cushions to give them softness and aluminum to support the structures

COALESSE

Product Version: Revit Architecture 2009

2142 Downloads

AGRV-HRAL_SeriesC-Metal & Glass Railing

# Floor mounted railing

# rail support

We proivde 2 type of Railing in RVT : H120,H150

We also create a Baluster using the railing support familt, so you can place it manully.

Visit our website AgrvArchitect.com for more families

No Rating

Product Version: Revit Architecture 2018

1350 Downloads

Coalesse - Emu

The Cross collection is a collection of statuesque and meticulous design that plays on a refined combination of materials: metals to form the shapes, cushions to give them softness and aluminum to support the structures.

COALESSE

Product Version: Revit Architecture 2009

3947 Downloads

Coalesse - Emu

The Cross collection is a collection of statuesque and meticulous design that plays on a refined combination of materials: metals to form the shapes, cushions to give them softness and aluminum to support the structures

COALESSE

Product Version: Revit Architecture 2009

2168 Downloads

Coalesse - Emu

The Cross collection is a collection of statuesque and meticulous design that plays on a refined combination of materials: metals to form the shapes, cushions to give them softness and aluminum to support the structures

COALESSE

Product Version: Revit Architecture 2009

1903 Downloads

Two metal wall mounted shelves. You can change the width, depth and space between them. You can also change how far the supports extend down and up. 

REVIT 2016 (not 2015)

Be aware that the elevation constraint measures from the bottom of the wall support, not the first shelf, so you might have to do some math. 

Product Version: Revit MEP 2015

14744 Downloads

AGRV-HRAL_SeriesC-Parapet-Metal & Glass Railing

# Parapet(Short wall) mounted railing

# rail support

We proivde 2 type of Railing in RVT : H120,H150

We also create a Baluster using the railing support familt, so you can place it manully.

Visit our website AgrvArchitect.com for more families

No Rating

Product Version: Revit Architecture 2018

906 Downloads

Fully parametric square concrete footing with square pier support and column straps.

Familt Category is 'Structural Columns' rather than 'Structural Footings' because when attaching a column to it, the column would attch to the top of the strap elevation rather than the pier bearing surface if categorized as a footing...

Product Version: Revit Architecture 2014

5404 Downloads

• Stickley Product Description - A true L. & J.G. Stickley classic, this reissued clock has an open molded frame that surrounds its unique dial and hands. It is distinguished by its large, overhanging prarie-style top and handsome frame and panel ends. The top end panels and back panel are removeable for access to the movement. The eight-day, cable wound German movemant features three different chimes, and sounds on the quarter hour and on the hour. The movement has 24 bronze bushings and twelve ruby jewels. Original design, circa 1911, L. & J.G. Stickley.
•  Family Information - No dimensional feature are parametric as the clock only comes in one size. The main body finish is parametric however.

Product Version: Revit Architecture 2011

6511 Downloads

User controls: base width, top width, concrete structural support center width, top cap width, top cap thickness, column height, cap on/off.

 I did not include a stone hatch.  That you'll have to put in.

No Rating

Product Version: Unknown

6256 Downloads

spider Crane with parametric Boom Extension. I did not have time to model the hook cable and may need to add few parameters depending on your needs. I have decide to create one as I have not seen a parametric spider crane quiet as good as this. Hopefully it will help create better for future needs. Enjoy!  "Corrected the visibilty if yes/no statement on the model. by Vision Artititech

No Rating

Product Version: Unknown

1025 Downloads

Model of SMEG's retro 50's refrigerator.  Model #FAB32ULOR3.

Non parametric.  Materials can be set for the body pieces combined, the logo and handles combined, and the support feet.

I made this for my wife who is and interior design student.  I hope it helps some others out there.

No Rating

Product Version: Revit Architecture 2017

5418 Downloads

This American Woodmark casework family is a model of their two door, one drawer, one shelf, two deep roll out trays base cabinet.  All materials are assigned via casework subcategories.  The drawer, each door, and each tray operate independently.  The three widths offered by American Woodmark are included as family types.  The URL parameter opens the catalog wherein this cabinet is found.

I've upgraded this model.  The doors open more reliably.  The best practice for opening and closing them is to not go to 90° but to go to some imtermediate angle, like 50°, and then go to 90°.

Product Version: Revit Architecture 2013

4544 Downloads

To make it parametric. Please click the link.

Please support my Youtube Channel, if the family is helpful.>>>>https://www.youtube.com/watch?v=rTMxFs6_s3g

No Rating

Product Version: Unknown

521 Downloads

AGRV-HRAL_SeriesD-Metal & Glass Railing# floor mounted railing# talon supportWe proivde 2 type of Railing in RVT : H120,H150We also create a Baluster using the railing support familt, so you can place it manullyVisit our website AgrvArchitect.com for more families

Product Version: Revit Architecture 2018

3070 Downloads

Series CA-431-1 floor mounted bi-level water cooler carrier with heavy gauge steel uprights with integral welded feet, universal steel hanger support plate, and plated hardware.

No Rating

Product Version: Revit MEP 2014

179 Downloads

Parametric Pendant Lighting (Exposed Bulb).  Not ceiling mounted so heights can be fully adjustable.

WARNING: I accidentally made type parameters instead of instance parameters so it could be a problem if you want to individually adjust settings of multiple instances. However, if you don't mind all fixtures changing at the same time, you are good to go.

Parameters: Bulb height (keep at 0'-0" at all times) / Cord Length / Support (Rail) height, Rod Length, Materials

Light sources are nested as separate bulbs

Product Version: Revit Architecture 2015

8313 Downloads

Series CA-311 epoxy coated floor mounted urinal carrier with heavy gauge steel offset uprights with welded feet, universal steel hanger support plate with integral mounting brackets, and plated hardware.

No Rating

Product Version: Revit MEP 2014

195 Downloads

Fully parametric canopy system based on the Mitchell Metals canopy system.  Allows you to drag it to the correct size and places the supports as required and recommended by the manufacturer.  The width/height is controlled to correspond to the manufacturer's maximum recommended dimensions. 

The parameters are shared between the support and the canopy system, you will most likely need to create the shared parameters in your own project or use the attached file.

No Rating

Product Version: Revit Architecture 2011

4903 Downloads

This is a standard design for R.R.Dry Stone masonary Retaining wall to support the hill roads. As normally the maximum length of hill roads are supported by these dry walls which do not use any mortar for masonary, to control the cost. Filling behind the wall has also modelled for explaining purpose, which may be removed.

No Rating

Product Version: Revit Architecture 2018

250 Downloads

Series CA-421 floor mounted plate type lavatory or water cooler carrier with heavy gauge steel uprights with integral welded feet, universal steel hanger support plate, and plated hardware.

No Rating

Product Version: Revit MEP 2014

155 Downloads

Parametric Water Tank on 2 side support mostly constructed on mumty roof. Internal size, wall thickness, floor & tank roof thickness, materials can be set manually. Tank can be raised above the roof. Manhole covers not provided . Lallan Ji, Varanasi

No Rating

Product Version: Revit Architecture 2015

509 Downloads

Series CA-321 epoxy coated floor mounted urinal carrier with heavy gauge steel offset uprights with welded feet, universal steel hanger support plate and bottom bearing plate with integral mounting brackets, and plated hardware.

No Rating

Product Version: Revit MEP 2014

161 Downloads