ADA required wing wall for water fountain.  Non-parametric.

No Rating

Product Version: Revit Architecture 2009

1385 Downloads

Embankment slides. Height 2000mm, Width 1000mm, in stainless steel. Not parametric. With one wave. Landscape improvement. Revit 2019.

Tobogan d'acer inoxidable per a situar en talús. Alçada de caiguda 2.00m, amplada 1.00m. S'assembla al model 3.63360 de Richter.

No Rating

Product Version: Revit Architecture 2019

928 Downloads

Here is a 3d Revit Architecture family of

a Caroma Concorde SmartFlush Toilet.

Created in Revit Architecture 2009.

High level of detail. File Size – 460kb.

Releasing more every week @ www.revitfamiliesonline.com  

Product Version: Revit Architecture 2009

9139 Downloads

This is a simple concrete apron I made. Used for ADA access to sidewalks from the street and the like.  Nothing special about it. I think it is parametric. I got tired of my void forms not working so i made this. 

This is a face based family. 

Let me know if this doesn't work or how it can be impoved. This is my first upload. 

Thanks

No Rating

Product Version: Unknown

1016 Downloads

This is a simple concrete apron I made. Used for ADA access to sidewalks from the street and the like.  Nothing special about it. I think it is parametric. I got tired of my void forms not working so i made this. 

This is a face based family. 

Let me know if this doesn't work or how it can be impoved. This is my first upload. 

Thanks

No Rating

Product Version: Unknown

295 Downloads

Embankment slides. Height 3000mm, Width 1000mm, in stainless steel. Not parametric. With one wave. Landscape improvement. Revit 2019.

Tobogan d'acer inoxidable per a situar en talús. Alçada de caiguda 3.00m, amplada 1.00m. Amb una ona. S'assembla al model 3.63390 de Richter.

No Rating

Product Version: Revit Architecture 2019

1060 Downloads

DISKUS systems comprise two variations of a sleek, stylish luminaire. These classic adaptations of the disk-shaped surface mount were engineered to outshine any similar type fixture in their class. DISKUS luminaires boast features that can meet the criteria for the most difficult lighting applications - vandal resistant, a very low profile (ADA approved), and of course excellent light distribution. Rated IP65.

Product Version: Revit Architecture 2010

7802 Downloads

DISKUS systems comprise two variations of a sleek, stylish luminaire. These classic adaptations of the disk-shaped surface mount were engineered to outshine any similar type fixture in their class. DISKUS luminaires boast features that can meet the criteria for the most difficult lighting applications - vandal resistant, a very low profile (ADA approved), and of course excellent light distribution. Rated IP65.

Product Version: Revit Architecture 2010

6994 Downloads

A Bleacher Section with flexible number of rows (max 16), width, and row-to-row height.  The bleachers can be displayed open, closed or partially open (three rows).  There is also an option to allow for ADA wheel chair recesses on either left or right sides.  The visibility options are not exclusive of each other so user must pay attention.

Product Version: Revit Architecture 2009

12896 Downloads

Sanyo "undercounter" medical refrigerator. Be careful with this thing...it's 34-1/2" tall at the hinge cap and will NOT fit  beneath a standard 36" high countertop. Some highly educated engineer must have come up with this...Duh. Where we install these, we have to put our countertops at 37" A.F.F. Many times it's next to a sink which requires 34" for ADA. This then requires a stepped counter system.

Something for all you medical designers to keep in mind if this fridge is spec'ed.

Product Version: Unknown

15875 Downloads

REVIT 2015

R1

Altura: 0,15 m

Largura: 1 m

Comprimento: 5 m

R2

Altura: 0,15 m

Largura: 1 m

Comprimento: 4 m

R3

Altura: 0,15 m

Largura: 1 m

Comprimento: 3,67 m

R4

Altura: 0,15 m

Largura: 1 m

Comprimento: 14,79 m

R5

Altura: 0,15 m

Largura: 1 m

Comprimento: 6,31 m

R6

Altura: 0,15 m

Largura: 1 m

Comprimento: 6,83 m

Product Version: Unknown

2209 Downloads

OUTSWING DOOR FOR COMMERCIAL ADA PURPOSES DOUBLE GLASS DOOR WITH ROWLOCK AND KEYSTONE

Product Version: Unknown

6931 Downloads

Stone finnish exterior drinking fountain, Standard and ADA, Freeze Resistant box. Wall thickness editable

No Rating

Product Version: Revit MEP 2013

4882 Downloads

BVN AIR

PLASTIC RADIAL BATH & TOILET ASPIRATOR

PLASTÄ°K RADYAL BANYO & TUVALET ASPÄ°RATÖRÜ

Product Version: Revit Architecture 2016

751 Downloads

Barcelona bed designed by Mies van der Rohe, color black

Cama Barcelona diseñada por Mies van der Rohe, color negro

Product Version: Revit Architecture 2012

23805 Downloads

ADA Grab Bars-Continuous

No Rating

Product Version: Revit Architecture 2018

1357 Downloads

ADA Vertical Grab Bar

Product Version: Unknown

12216 Downloads

Acorn surface mounted shower, insert at 0' for shower head at 6'. Turn on/off top or back supply, top cover, top suppy piping cover. Standard and ADA, top and back CW and HW connectors, 3D fine and 2D medium and coarse representaions.

Product Version: Revit MEP 2010

8317 Downloads

Kohler - K-T8226 Taboret® Rite-Temp Pressure-Balancing Shower Trim with Lever Handle

Single Lever Handle −;;−;; Meets ADA requirements

Product Version: Unknown

13861 Downloads

A 1 basin sink made by Bradley Corporation.  Has sink, soap dispenser, hand dryer and trash can (trash on right side) all in one unit.  Fully parametric and ADA complient.  Made by Bradley and made better by me.  Please rate and comment.

Product Version: Revit MEP 2010

3223 Downloads

Series TD-300 Elevator Channel Drain with 11-3/4 (298) wide x (specify) long 12 ga. type 304 stainless steel body, heel proof and ADA compliant load class B stainless steel grating with grate open area of 65 sq. in. per foot is secured with vandal-proof stainless steel screws, and 4 (110) no hub center outlet. Complies with 2013 California Building Code 403.6.1, 403.6.2, 3007.4, 3008.4, and SFFC Section 511.1.4 for a flow rate of 100 GPM.

No Rating

Product Version: Revit MEP 2014

492 Downloads

Hey guys, I noticed that someone posted a Parametric Slab Family in here, but nobody could've download it. Apparently it was a fake.

A while ago I managed to get a real Parametric Slab Family (with joists and bricks), but I don't remember from where or who is the author, but I decided to post it here, so other people could use it too.

PS: I DIDN'T DEVELOPED THIS FAMILY, SO, IF THE AUTHOR SHOWS UP AND ASK ME TO REMOVE IT, I WILL REMOVE IT.

How to use: Load the family "Laje_de_Forro_Parametric_Slab_17204.rfa" in the project and create a Beam System. Change the Beam Type to "Vigota Treliçada..." and you will see the joists. Use Fixed Distance of 0,43 m. Then select one or all the joists (not the beam system) and you will see the option "Visibilidade da Lajota" in the bottom of the Properties Panel. Check it to enable the brick. That is it.

---------------------------------------------------- 

Olá pessoal, eu percebi que alguém postou uma Família Paramétrica de Laje de Forro aqui, mas ninguém conseguia baixar ela. Aparentemente era uma montagem.

A alguem tempo atrás eu consegui uma Família de Laje de Forro real (com vigotas e lajotas), mas não consigo me lembrar onde e quem era o autor, mas decidi postar aqui, para que outras pessoas pudessem usá-la também.

OBS: EU NÃO DESENVOLVI ESSA FAMÍLIA, ENTÃO, SE O AUTOR APARECER E PEDIR PRA REMOVER, EU VOU REMOVER.

Como usar: Carregue a família "Laje_de_Forro_Parametric_Slab_17204.rfa" no projeto e crie um Sistema de Vigas. Mude o Tipo de Viga (Beam Type) para "Vigota Treliçada..." e você verá as vigotas. Use Distância Fixada de 0,43m. Depois selecione um ou todas as vigotas (não o sistema de vigas) que você verá a opção "Visibilidade da Lajota" no fundo do Painel de Propriedades. Marque essa opção para habilitar as vigotas. Pronto, é isso.

Product Version: Unknown

3828 Downloads

The new SURVIVOR® 9 offers water, impact, and vandal-resistant solutions for the most demanding applications. A versatile, unobtrusive fixture for a wide range of surface or pendant mount interior or exterior applications. SURVIVOR® 9 fixtures are fully gasketed (IP66 rated) and feature captive hardware and a hinged door with a polycarbonate prismatic satine lens. A sleek and shallow fixture (only 2 3/8" deep), Survivor is compliant with the Americans with Disabilities Act (ADA). Survivor can be specified in 2, 3, and 4 foot lengths and operated with a choice of T8, T5, and T5HO lamps. Survivor® 9 offers the specifier a vandal and abuse resistant fixture that is suitable aesthetically for mounting conditions in university lobbies, corporate applications, school corridors, pedestrian bridges, overpasses, and parking garages. Contact Selux with your project's requirements.

Product Version: Revit Architecture 2010

3632 Downloads

The new SURVIVOR® 9 offers water, impact, and vandal-resistant solutions for the most demanding applications. A versatile, unobtrusive fixture for a wide range of surface or pendant mount interior or exterior applications. SURVIVOR® 9 fixtures are fully gasketed (IP66 rated) and feature captive hardware and a hinged door with a polycarbonate prismatic satine lens. A sleek and shallow fixture (only 2 3/8" deep), Survivor is compliant with the Americans with Disabilities Act (ADA). Survivor can be specified in 2, 3, and 4 foot lengths and operated with a choice of T8, T5, and T5HO lamps. Survivor® 9 offers the specifier a vandal and abuse resistant fixture that is suitable aesthetically for mounting conditions in university lobbies, corporate applications, school corridors, pedestrian bridges, overpasses, and parking garages. Contact Selux with your project's requirements.

No Rating

Product Version: Revit Architecture 2010

7239 Downloads

Fully parametric ADA Grab Bar. This Grab bar is a straight bar however attaches to the back and side wall.

Blocking lines have been added to the back and side walls. You can turn these lines off in the Visibility settings in the instances properties. They are also turned off in the cores visibility settings.  (Bobrick can custom make them. You can probably find other manufacturers as well) Hope it help 

revit 2015

No Rating

Product Version: Unknown

2392 Downloads

Wall mounted vanity countertop with 4 sinks and drain pipe. Lines for ADA clearances shown in side view.

No Rating

Product Version: Revit Architecture 2008

10059 Downloads

Wall mounted vanity countertop with 5 sinks and drain pipe. Lines for ADA clearances shown in side view.

Product Version: Revit Architecture 2008

7287 Downloads

Wall mounted vanity countertop with 3 sinks and drain pipe. Lines for ADA clearances shown in side view. 

Product Version: Revit Architecture 2008

13153 Downloads

AGRV_SANR-FIXT_Toilet-AD_無障礙馬桶 

Accessible Design Toilet with DIM & Material parameters and dimension Guide

All size is basic on Taiwan Accessible Design regulation.

Visit our website AgileRevit.com for more families

No Rating

Product Version: Revit Architecture 2018

607 Downloads

No Rating

Product Version: Unknown

18 Downloads