Base Cabinet - Sink, 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

8150 Downloads

Base Cabinet - 1 Drawer above 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

Product Version: Revit Architecture 2014

5385 Downloads

Base Cabinet - 1 Drawer above 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

5831 Downloads

Tall Cabinet - 1 Door above 2 Drawer

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

5011 Downloads

Door for CURTAIN WALL PANELS. Model based on Windspec Inc's Series 5000. Comes with a few hardware options.

http://www.windspec.com/pro-entr-500.htm

Product Version: Revit Architecture 2012

31794 Downloads

LED Recessed fixture use for Living room, Kitchen, Bedroom ceiling...

♥Enjoy ♥ !

Product Version: Revit Architecture 2017

7677 Downloads

Fully parametric swinging barn door.

Product Version: Revit Architecture 2020

2604 Downloads

Parametric steel roller shutter door

Product Version: Unknown

35737 Downloads

Single Dutch Door existing

No Rating

Product Version: Unknown

541 Downloads

Single Offset Pivot Door

No Rating

Product Version: Unknown

3498 Downloads

Overhead Sectional Glass Door

Product Version: Unknown

2146 Downloads

Garage Door - Carriage - Single

No Rating

Product Version: Unknown

14556 Downloads

Single Flush Door w/ HM DW Frame

Product Version: Revit Architecture 2008

1645 Downloads

MIFAB Series MC-10D-EXT double, horizontal, adjustable high rough-in water closet carrier with lacquered cast iron fitting, 4" (102) no hub waste, 2" (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8" tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

50 Downloads

Deja vu: Buta, mint a tök.

Viszont nyitható 0-90 fok között.

please dont slam the door!

Product Version: Revit MEP 2010

3440 Downloads

A parametric base casework cabinet. The family contains a level of detailing when cut in section. The family also comes with a catalog in the form of a .txt file that needs to be in the same directory in order for the catalog to work. The following parametric values are available: Height, Width, Length, Material, Door Styles, Hardware Styles, Shelf Style

No Rating

Product Version: Unknown

2487 Downloads

MIFAB® Series MC-12D-HS double, vertical, adjustable hub and spigot water closet carrier with lacquered cast iron fitting, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

24 Downloads

MIFAB® Series MC-15D double, vertical, fixed water closet carrier with offset lacquered cast iron fitting, 4” (102) no hub waste, 2” (51) no hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

42 Downloads

8' Overhead Panel Garage Door Colonial

Product Version: Unknown

16973 Downloads

16' Overhead Panel Garage Door Colonial

Product Version: Unknown

25065 Downloads

MIFAB® Series MC-10D-27-37-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

23 Downloads

MIFAB® Series MC-10D-27-37-HS double, horizontal, adjustable hub and spigot water closet carrier with lacquered, 37” (940) long barrel cast iron fitting, 2” (51) no hub vent connection, 2” (51) no hub auxiliary inlet connection, lacquered cast iron gasketed adjustable faceplates, universal floor mounted cast iron foot supports, adjustable 8” tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome plated finishing cap nuts.

No Rating

Product Version: Unknown

16 Downloads

16' Overhead Garage Door - Wagon Wheel Design

Product Version: Revit Building 8.1

10762 Downloads

One Door, multiple options.

Horizontal strip size and top offset, adjustable

Door has adjustable architrave.

Architrave can be turned on and off.

Modeled in Revit 2020. Fully adjustable in Revit except for the frame depts. Two frame sizes available.

Modeled in Revit 2020. Fully adjustable in Revit except for the frame depts. Two frame sizes available.

No Rating

Product Version: Revit Architecture 2020

89 Downloads

This panel door is not parametric

No Rating

Product Version: Unknown

427 Downloads

This panel door is not parametric

No Rating

Product Version: Unknown

1918 Downloads

Line Based Euro-Style Upper/Lower Cabinet Casework that divides the length by the max_spacing automatically. Adjust max_spacing for number of cabinets.

Product Version: Revit Architecture 2011

17222 Downloads

Base Cabinet - False front, 1 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

2821 Downloads

Base Cabinet - False front, 2 Door

*** IMPORTANT: The shared parameters file must be pointed to inside Revit.  All casework families built by myself can point to the same shared parameter file. ***

• Do not adjust parameters under "Other" category.


• Please save the shared parameters file in the same directory as the cabinet family.

Any comments would be appreciated.

No Rating

Product Version: Revit Architecture 2014

3990 Downloads

Line Based Euro-Style Lower Cabinet Casework that divides the length by the max_spacing automatically. Adjust max_spacing for number of cabinets.

Product Version: Revit Architecture 2011

7989 Downloads