MIFAB® Series F1830-PL lacquered cast iron standpipe type planting area drain with anchor flange, cast iron membrane clamp ring with primary and secondary weepholes for waterproofing membrane, and adjustable 4” (102) diameter ABS perforated standpipe and stainless steel secured dome.

No Rating

Product Version: Unknown

12 Downloads

The BEECOFriendly Double Check Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed. Certified lead free devices.

No Rating

Product Version: Unknown

271 Downloads

MIFAB® LIL-O Series HDPE injection molded oil. Unit shall include: sediment bucket (1/4″ diameter holes) with perforated baffle (3/8″ x 1 1/4″ slots) near inlet, deep seal trap covered by lid, sewer gas stopper, securing latches, stainless steel calibrated orifice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and HDPE injection molded, non skid, rectangular gasketed lid(s).

No Rating

Product Version: Unknown

51 Downloads

The BEECO Friendly Double Check Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1015, CSA B64.5 and IAPMO listed.

No Rating

Product Version: Unknown

200 Downloads

MIFAB® LIL-OS Series HDPE injection molded oil / sediment interceptor. Unit shall include: sediment bucket (1/4” diameter holes) underneath top inlet ductile iron grate(s), deep seal trap.

No Rating

Product Version: Unknown

53 Downloads

The BEECO Friendly Reduced Pressure Zone Backflow Preventer Valve is designed to stop the reverse of flow of a liquid into a potable water system. The proper installation of a backflow preventer must be done by a certified expert under local codes and guidelines to assure the protection of the drinking water system. The Valve shall be certified to ASSE 1013. Is Certified to cUPC and IAPMO listed.

No Rating

Product Version: Unknown

137 Downloads

MIFAB® LIL-F Series HDPE injection molded fish scale interceptor. Unit shall include: two internal straining baffles (first one with 1/4″ diameter holes and second one with 1/8″ diameter holes – both spaced 1/2″ apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

60 Downloads

MIFAB® Series HY-1000-NPB ____ (specify length) A.S.S.E. 1019-B certified exposed type, self draining, non freeze low lead wall hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly  complete with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

64 Downloads

MIFAB® Series LIL-FUR HDPE injection molded fur interceptor. Unit shall include: two internal straining baffles with 1/4” diameter holes spaced 1/2” apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

24 Downloads

MIFAB® Series HY-2000-NPB (specify length) A.S.S.E. 1019-B certified exposed type, self draining, non freeze low lead wall hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty brass casing, 360 degree swivel inlet connection, heavy duty chrome plated bronze head casting, polished chrome plated face plate, and satin finished nickel bronze box with hinged locking cover. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

81 Downloads

MIFAB® Series LIL-L HDPE injection molded lint interceptor. Unit shall include: two internal straining baffles with 3/8″ diameter holes spaced 1/2″ apart, internal deep seal trap, and HDPE injection molded, non skid, rectangular gasketed lid with securing latches.

No Rating

Product Version: Unknown

34 Downloads

MIFAB® Series HY-3000-NPB exposed type, self draining, low lead, moderate climate wall hydrant with A.S.S.E. 1011 certified antisiphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting and polished chrome plated face plate. Operating key to be furnished with each hydrant.

No Rating

Product Version: Unknown

118 Downloads

MIFAB® Series HY-3500-NPB encased type, self draining. moderate climate, low lead, wall hydrant with A.S.S.E. 1011 certified antisiphon vandal resistant integral vacuum breaker.Hydrant assembly complete with one piece neoprene plunger to control the flow function, hardened bronze operating stem, heavy duty chrome plated bronze head casting, polished chrome plated face plate and satin finished nickel bronze box with hinged locking cover. Operating key furnished with each hydrant.

No Rating

Product Version: Unknown

28 Downloads

MIFAB® LIL-PL Series HDPE injection molded plaster interceptor. Unit shall include: two internal straining baffles (first one has 3/8″ x 1.25″ long slots and the second one has 1/4″ diameter holes spaced 1/2″ apart, and HDPE injection molded, non skid, rectangular gasketed lid with securing latches.

No Rating

Product Version: Unknown

14 Downloads

MIFAB® Series HY-5000-NPB self draining, low lead, moderate climate narrow wall hydrant with A.S.S.E. 1011 certified antisiphon vandal resistant vacuum breaker. Operating key furnished with each hydrant.

No Rating

Product Version: Unknown

51 Downloads

MIFAB® Series LIL-R HDPE injection molded rice interceptor. Unit shall include: two internal straining baffles with 1/4” diameter holes spaced 1/2” apart, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

20 Downloads

MIFAB® Series HY-5500-NPB encased self draining, low lead, moderate climate narrow wall hydrant with A.S.S.E. 1011 certified anti-siphon vandal resistant vacuum breaker. Operating key furnished with each hydrant.

No Rating

Product Version: Unknown

29 Downloads

MIFAB® LIL-S Series HDPE injection molded solids interceptor. Unit shall include: internal perforated sediment bucket (1/4″ diameter holes) with coarse screen, baffle assembly (3/8″ x 1 1/4″ slots) and HDPE injection molded, non skid, rectangular gasketed lid with securing latches. For indoor/outdoor use.

No Rating

Product Version: Unknown

37 Downloads

MIFAB® Series HY-6000-NPB (specify length) A.S.S.E. 1019-B certified self draining, non freeze, lawn/ground hydrant with A.S.S.E. 1011 approved anti-siphon and vandal resistant integral vacuum breaker with 3/4” (19) male hose connection. Hydrant assembly complete with one piece neoprene plunger to control both the flow and drain functions, hardened bronze operating stem, drain port under the hexagon nut, heavy duty galvanized steel pipe, heavy duty chrome plated bronze head casting, polished chrome plated face plate and satin finished nickel bronze box with hinged locking cover. Operating key furnished with each hydrant opens the hydrant, box and prevents unauthorized use. Hydrant inlet connection complete with drain port tapped for 1/8” (3) N.P.T.

No Rating

Product Version: Unknown

69 Downloads

MIFAB® LIL-SA Series HDPE injection molded sand interceptor. Unit shall include: two internal sand separation baffles with 3″ diameter holes, internal deep seal trap and HDPE injection molded, non skid, rectangular gasketed lid with securing latches.

No Rating

Product Version: Unknown

50 Downloads

MIFAB® Series F1490 epoxy coated large capacity floor drain with deep sump body, and standard 1” (25) thick, 15 ¾" (400) square, (specify material finish) tractor grate with free area of 75 square inches.

No Rating

Product Version: Unknown

769 Downloads

MIFAB® Series F1530 lacquered cast iron floor drain with anchor flange, weepholes, 16” (406”) diameter fixed, heavy duty membrane collar with weepholes, and standard 1” (25) thick, 9” (229) round, ductile iron tractor grate.

No Rating

Product Version: Unknown

9 Downloads

MIFAB® Series F1550 lacquered cast iron floor drain with anchor flange, weepholes, 20” (508) diameter fixed, heavy duty membrane collar with weepholes and standard 1” (25) thick, 15” (381) round, (specify material finish) tractor grate.

No Rating

Product Version: Unknown

53 Downloads

MIFAB® Series F1570 - (A, B, C, D or E) powder epoxy coated heavy duty parking area catch basin with anchor flange, and extra heavy duty 24” x 24” (610 x 610) two section (specify material finish) grates with a free area of 200 square inches (129,032²). Grates to

have maximum 13/16” (21) openings.

No Rating

Product Version: Unknown

306 Downloads

MIFAB® Series F1580 powder epoxy coated deep sump drain with secondary dome strainer, bottom outlet and extra heavy duty 24” x 24” (610 x 610) two section ductile iron grates with a free area of 200 square inches (129,032²). Grates to have maximum 13/16” (21) openings.

No Rating

Product Version: Unknown

167 Downloads

MIFAB® Series F1590 powder epoxy coated drain with offset bottom outlet, anchor flange, and extra heavy duty 24” x 24” (610 x 610) two section ductile iron grates with a free area of 200 square inches (129,032²). Grates to have maximum 13/16” (21) openings.

No Rating

Product Version: Unknown

110 Downloads

MIFAB® Series F1590-90 powder epoxy coated parking area drain with side outlet, anchor flange, and extra heavy duty 24” x 24” (610 x 610) two section ductile iron grates with a free area of 200 square inches (129,032²). Grates to have maximum 13/16” (21) openings.

No Rating

Product Version: Unknown

214 Downloads

MIFAB® Series F1600-C lacquered cast iron floor drain with upper and lower bodies and anchor flanges, cast iron membrane clamp rings with primary and secondary weepholes for waterproofing membrane, neoprene expansion compensator, and standard reinforced

(specify diameter) satin finished (specify material finish) strainer.

No Rating

Product Version: Unknown

25 Downloads

MIFAB® Series F1620-C lacquered cast iron floor drain with upper and lower bodies and anchor flanges, cast iron membrane clamp rings with primary and secondary weepholes for waterproofing membrane, neoprene expansion compensator, and standard 1” (25)

thick, 9” (229) round, tractor grate.

No Rating

Product Version: Unknown

23 Downloads

MIFAB® Series F1640, 9” (229) diameter blood and water drain set consisting of two lacquered cast iron bodies with anchor flange and weepholes. One body furnished with a 9” (229) diameter lacquered cast iron adjustable top assembly and special duty ductile iron grate. The other body furnished with a solid gasketed ductile iron cover with lift ring. The top assemblies are interchangeable with either body.

(For membrane floors, add Suffix -C for the membrane clamp.)

No Rating

Product Version: Unknown

18 Downloads