Series CO-1200-R epoxy coated cast iron floor cleanout with 5 in. (127mm) round adjustable gasketed heavy duty stainless steel top, removable gas tight gasketed brass cleanout plug, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

236 Downloads

Series 9D Dual Check Valves with Intermediate Atmospheric Vent prevent the reverse flow of hot or cold polluted water from entering into the potable water supply. They have a brass body with stainless steel internal parts, integral strainer, and two durable, tight-sealing, rubber check valves. Series 9D is designed for continuous pressure, non-health hazard applications in smaller supply lines, such as laboratory equipment, processing tanks, sterilizers, dairy equipment, and specifically for boiler feed lines. Minimum Working Pressure: 25psi (172kPa), Maximum Working Pressure: 175psi (12.1 bar)

No Rating

Product Version: Revit MEP 2014

199 Downloads

Series CO-1200-RX epoxy coated cast iron floor cleanout with 5 in. (127mm) round adjustable gasketed extra heavy duty stainless steel top, removable gas tight gasketed brass cleanout plug and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

162 Downloads

Series 709DCDA Double Check Detector Assemblies prevent backflow of non-health hazard fire protection system substances from being pumped or siphoned into the potable water supply. They incorporate a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. Their compact epoxy coated cast iron unibody and modular check design facilitate simple and easy installation and maintenance. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

255 Downloads

Series CO-1200-S epoxy coated cast iron floor cleanout with 5 in.x5 in. (127x127mm) square adjustable gasketed heavy duty stainless steel top, removable gas tight gasketed brass cleanout plug, and no hub(standard) outlet.

No Rating

Product Version: Revit MEP 2014

157 Downloads

Series 719 Double Check Valve Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements. They have a bronze alloy body construction and chloramine resistant elastomers. Series 719 features a separate access, top-entry check valve design for ease of maintenance and is for use at referenced cross-connections in non-health hazard applications. Check with local inspection authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

249 Downloads

Series CO-1200-SX epoxy coated cast iron floor cleanout with 5 in. x 5 in. (127x127mm) square adjustable gasketed extra heavy duty stainless steel top, removable gas tight gasketed brass cleanout plug and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

157 Downloads

Series 757 Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. For unmatched versatility, assemblies are available for horizontal, vertical, or N pattern installations while groove connections allow ease of installation and pipe alignment. Patented tri-link check assemblies are also designed for easy serviceability. A variety of shutoff valve options are offered.

No Rating

Product Version: Revit MEP 2014

662 Downloads

Series CO-200-SX-4 epoxy coated cast iron floor cleanout with 5 in. x 5 in. (127x127mm) square adjustable gasketed heavy duty ductile iron top, removable gas tight gasketed brass cleanout plug and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

46 Downloads

Series 757DCDA, 757NDCDA Double Check Detector Assemblies prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. Compact housings consist of two independently operating tri-link check valves, two shutoff valves, and four test cocks. They feature a stainless steel housing and sleeve and are 70% lighter than traditional designs. Series 757, 757N is designed for non-health hazard applications and may be installed under continuous pressure service to protect against both backpressure and backsiphonage. This Series is used primarily on fire sprinkler lines when it is necessary to monitor unauthorized use of water. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

466 Downloads

Series CO-300-MF epoxy coated cast iron access housing with anchor flanges and extra heavy duty ductile iron cover.

No Rating

Product Version: Revit MEP 2014

68 Downloads

Series 774 Double Check Valve Assemblies prevent the backflow of polluted water from entering into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body and low head loss. Series 774 is ideal in applications identified by local authorities as non-health hazard. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

431 Downloads

Series CO-300-R round nickel bronze access cover with concealed mounting flanges and scoriated cover.

No Rating

Product Version: Revit MEP 2014

474 Downloads

Series 774DCDA Double Check Detector Assemblies prevent the backflow of fire protection system substances from being pumped or siphoned into the potable water supply. They have a compact construction and short lay length, ideal for retrofit installations. They feature a lightweight stainless steel body, thermoplastic and stainless steel check valves, and low head loss. Series 774DCDA can be installed in the horizontal or vertical flow-up positions. It is designed for installation on applications identified by local authorities as non-health hazard, such as on fire protection systems. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

504 Downloads

Series CO-300-S square nickel bronze access cover with concealed mounting flanges and scoriated cover.

No Rating

Product Version: Revit MEP 2014

936 Downloads

Series 919 Reduced Pressure Zone Assemblies prevent the reverse flow of contaminated water from entering into the potable water supply due to backsiphonage and or backpressure. They have a bronze body construction, two poppet style check valves, and replaceable check seats, with an intermediate relief valve. Series 919 compact modular design facilitates easy maintenance and assembly access. It is ideal for protection at health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit Structure 2014

101 Downloads

Series CO-440-RD wall cleanout with two-piece expandable cleanout plug, stainless steel access cover, and vandal proof stainless steel screw.

No Rating

Product Version: Unknown

179 Downloads

Series 957, 957N, 957Z Reduced Pressure Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a potential health hazard. Compact design and lightweight stainless steel construction (70% lighter than traditional designs) makes installation easier and faster. Groove connections also ease installation and pipe alignment. A variety of shutoff valve options are available.

No Rating

Product Version: Revit MEP 2014

659 Downloads

Series CO-450-RD epoxy coated cast iron wall cleanout with gasketed cover and no hub connection, stainless steel access cover, and vandal proof stainless steel screw.

No Rating

Product Version: Unknown

101 Downloads

Series 957RPDA, 957NRPDDA, 957ZRPDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 957RPDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of a compact, stainless steel body with stainless steel internal parts, two check valves, a pressure-differential relief valve, shutoff valves, torsion spring checks and relief valve, and bronze, nickel-plated test cocks. Series 957RPDA, 957NRPDDA, 957ZRPDA is 70% lighter than traditional designs and is ideal for health hazard cross-connection, such as on fire sprinkler systems. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

294 Downloads

Series CO-480-RD stainless steel access cover with vandal proof stainless steel screw.

No Rating

Product Version: Revit Structure 2014

88 Downloads

Series 994 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. It consists of a stainless steel body construction with stainless steel internal parts. The bottom-mounted relief valve is located between the two check valves, making it suitable for installations against an outside wall. Series 994 has a compact design with a short lay length, ideal for retrofit installations. The 994 is designed for health hazard applications. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar).

No Rating

Product Version: Revit MEP 2014

198 Downloads

Brass Cleanout Plug

No Rating

Product Version: Revit Structure 2014

105 Downloads

Series 994DCDA Reduced Pressure Detector Assemblies prevent the reverse flow of fire protection system substances from being pumped or siphoned into the potable water supply. The 994DCDA incorporates a meter to detect ground leaks and unauthorized illegal taps, greatly reducing annual water expenses. It consists of a stainless steel body, stainless steel internal parts, thermoplastic check valves and a bottom-mounted relief valve. Series 994DCDA is half the weight of competitive designs, and its short lay length makes installation and maintenance simple and easy. It is ideal for installation on fire protection systems. Check with local water authorities for installation requirements. Maximum Working Pressure: 175psi (12.06 bar)

No Rating

Product Version: Revit MEP 2014

283 Downloads

Wall Cleanout with Brass Plug, Stainless Steel Cover

No Rating

Product Version: Revit Structure 2014

91 Downloads

The Watts Model LF07S Residential Fire Sprinkler Dual Check Backflow Preventer is designed for non-health hazard [i.e., pollutant] application on potable fire sprinkler service connections to protect against possible backsiphonage conditions that could inadvertently drain the fire sprinkler system.

No Rating

Product Version: Revit MEP 2014

178 Downloads

Series FS-500 12 in. (305mm) square x 6 in. (152mm) deep PVC sanitary floor sink with secured grate,and socket outlet.

No Rating

Product Version: Revit Structure 2014

205 Downloads

Series LF7 Lead Free* Dual Check Valves prevent the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. They have a Lead Free* cast copper silicon alloy body construction, two plastic replaceable check valves, and stainless steel springs. Series LF7 is designed for non-health hazard residential water system containment, continuous pressure applications. It is installed immediately downstream of the residential water meter, in a vertical or horizontal position. Check with local inspection authorities for installation requirements. Minimum Working Pressure: 10psi (69 kPa) Maximum Working Pressure: 150psi (10 bar).

No Rating

Product Version: Revit MEP 2014

134 Downloads

Series FS-700 8 in. (203mm) round x 3 in. (76) deep flanged sanitary floor sink with white porcelain enamel coated interior, loose set porcelain enamel coated cast iron grate, aluminum dome bottom strainer, and no hub(standard) outlet.

No Rating

Product Version: Revit Structure 2014

140 Downloads

Series LF7R Lead-free* Dual Check Valves prevent the reverse flow of liquids in a plumbing system from entering the drinking water supply where there is a non-health hazard. Designed for residential water system containment at the service entrance or individual outlets. They can be installed immediately downstream of the residential meter in a horizontal or vertical position. Replaceable compact plastic check modules. Available in a combination of inlet/outlet sizes and types, and thread and end connections.

No Rating

Product Version: Revit MEP 2014

88 Downloads