While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

Rolltop Desk – Modeled after two as they appear in the U.S. Senate Chambers

This model is FACE-BASED. The Desk has parametric finishes. The rolltop can be open or closed based on a parameter. There are some nested models including notepad, document stacks and books.  There are a number of parameters assigned but they have not been tested.  

Thomas@loker.com

Product Version: Revit Architecture 2020

288 Downloads

This is a model of a backyard Rangetop. You can change many of the finishes.  See my Barbeque model. 

The rangetop has a void attached so you can drop it on an existing counter and it will cut out the space around it.  Its one of my first attempts at building parametric families.

Product Version: Revit Structure 2020

4041 Downloads

Add some life to your indoor or outdoor kitchen models with a nice juicy steak.

This is a simple model of a steak, I have included the required images of the steakx the steak bumpmap, and the steak cutout in my image galery.

Product Version: Unknown

995 Downloads

This is an arched carport shade I made for a friend by request for his project.

The length of the carport is parametric as are the materials.

I tried to figue out how I could make the tilt angle parametric and the width but it is complicated by the seeming limitations on the sweep curves and how they change as the ange flexes and the back to front length changes.  (Suggestions if you have them would be appreciated)

Product Version: Unknown

2835 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

Wall Art. Cherubs

This model is FACE-BASED. It is a model of a plaster Wall Plaque of cherubs.  Materials are parametric

Thomas@loker.com

Product Version: Revit Structure 2020

5334 Downloads

This is a model of a backyard barbeque, highly parametric, you can open and close the hood, and change many of the finishes.  I will also upload the steak model I made to show the grill in action.  I will be also loading the rangetop and articulated light for the barbeque as well.  

The barbeque has a void attachech so you can drop it on an existing counter and it will cut out the space around it.  Its one of my first attempts at building a parametric family.

Product Version: Revit Structure 2020

19404 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

Vice President’s Desk in Senate Chambers

This model is FACE-BASED. The Desk has parametric finishes.

Thomas@loker.com

No Rating

Product Version: Revit Architecture 2020

236 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

Wall Sconce (Large) as seen in the U.S. Senate Chambers Upper Gallery

This model is FACE-BASED light unit.  It has parametric finishes

Thomas@loker.com

No Rating

Product Version: Revit Structure 2020

289 Downloads

This is a model of a backyard Rangetop. You can change many of the finishes.  See my Barbeque model. 

The rangetop has a void attached so you can drop it on an existing counter and it will cut out the space around it.  Its one of my first attempts at building parametric families.

No Rating

Product Version: Revit Structure 2020

3284 Downloads

This is a model of a backyard Rangetop. You can change many of the finishes.  See my Barbeque model. 

The rangetop has a void attached so you can drop it on an existing counter and it will cut out the space around it.  Its one of my first attempts at building parametric families.

No Rating

Product Version: Revit Structure 2020

1514 Downloads

This is a model of a dropin rangetop for an outdoor kitchen.

The finishes are parametric.  

No Rating

Product Version: Revit Architecture 2020

7868 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

Sculpture (Bust) – Character 3

This model is FACE-BASED. It is an import from 3DS Max via DWF file import.  It is a data-heavy addition to a Revit model. If you chose to use this item, I would add it last in the workflow.  The height of the column and materials are parametric.  The model was obtained from Turbosquid.com and is a free model.

Thomas@loker.com

No Rating

Product Version: Revit Structure 2020

891 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

Desk Microphone

This model is FACE-BASED. IT is a model of a desk microphone. Materials are parametric

Thomas@loker.com

No Rating

Product Version: Unknown

1014 Downloads

This is a butcherblock table for a kitchen design.  

It is parametric.  YOu can adjust materials, depth, length, height and frame thickness

Thomas W. Loker

No Rating

Product Version: Revit Structure 2020

509 Downloads

While we are in Quarantine as a result of the Covid-19 paranoiademic, I decided to spend some time pushing my Revit 2021 knowledge.  I modeled the United States Senate Chambers and Upper gallery. These items are part of the families used to create this model.

U.S. Senator’s Desk in Chambers

This model is FACE-BASED. The Desk has parametric finishes. Both the top and desk drawer can be either closed or open. The family is nested with some accessory items including inkwells, pencils, yellow-pad, notebook and stacks of legislation.

Thomas@loker.com

No Rating

Product Version: Revit Architecture 2020

196 Downloads