 |
MIFAB® Series MI-NEUT solid construction seamless polyethylene body with inlet and outlet, optional vent connections, acid resistant epoxy coated bolted down neoprene gasketed lid, stainless steel hardware. The tank is filled with neutralization medium, lump limestone 1” to 3” diameter size, water is then added to the tank to help dilution. |

|
Product Version: Unknown
158 Downloads
|
|
 |
MIFAB® Series MI-E-O-HU__ sanitary powder epoxy coated inside and outside fabricated 10 gauge steel electronic oil interceptor.
Unit to include: sediment bucket with perforated baffle near inlet, deep seal trap covered by lid, sewer gas stopper, securing bolt(s), removable baffle assembly and cross bar, stainless steel calibrated orfice plate, internal air relief by-pass, adjustable automatic draw-off assembly, double vent connection on each side, and steel powder epoxy coated, non skid rectangular lid(s). |

|
Product Version: Unknown
120 Downloads
|
|
 |
The Automatic Control Valve shall be a Ductile Iron Body and Cover design. The Valve shall have a resilient seal disc, guided top and bottom; Bottom guide will be vanes, sliding in a stainless steel seat arrangement, single seated line pressure operated, diaphragm actuated, pilot controlled, valve. The valve shall seal by means of a stainless steel seat. All parts are to be replaceable in the field without removing the valve from the line. All flange dimensions including face to face lengths shall conform to ISO Standards. |

|
Product Version: Unknown
1175 Downloads
|
|
 |
MIFAB® Series C1310 floor access cover, nickel bronze body with round, scoriated secured cover. |

|
Product Version: Unknown
980 Downloads
|
|
 |
MIFAB® Series R1200-90 lacquered cast iron deep sump roof drain with threaded side outlet, 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches. |

|
Product Version: Unknown
245 Downloads
|
|
 |
MIFAB® Series BV1000 lacquered cast iron backwater valve with no hub inlet and outlet, gasketed bolted cover, and automatic pvc flapper type backwater valve. |

|
Product Version: Unknown
452 Downloads
|
|
 |
MIFAB® Series MI-SD____ sanitary epoxy coated inside and outside fabricated 10 gauge steel sand interceptor. Unit shall include: removable cross bar, four 3" (76) threaded vent connections, solid straining baffles, stainless steel calibrated orfice plate, securing bolt(s), sediment bucket with perforated baffle beside inlet, deep seal trap, sewer gas stopper, internal air relief by-pass, and steel powder epoxy coated non skid rectangular gasketed lid(s). |

|
Product Version: Unknown
209 Downloads
|
|
 |
MIFAB Series C1460-R (select model number) lacquered cast iron cleanout with large access area, tapered thread plug and 6” round, smooth nickel bronze access panel with allen key screws and anchor frame with mounting lugs. |

|
Product Version: Unknown
11 Downloads
|
|
 |
MIFAB® Series F1490 epoxy coated large capacity floor drain with deep sump body, and standard 1” (25) thick, 15 ¾" (400) square, (specify material finish) tractor grate with free area of 75 square inches. |

|
Product Version: Unknown
1014 Downloads
|
|
 |
MIFAB® Series R1200-Z lacquered cast iron deep sump roof drain with 20” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches. |
No Rating |
Product Version: Unknown
59 Downloads
|
|
 |
MIFAB® Series R1200-SO lacquered fabricated deep sump roof drain with No Hub side and bottom outlet, 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, and standard selflocking low profile aluminum dome strainer. |
No Rating |
Product Version: Unknown
160 Downloads
|
|
 |
MIFAB® Series R1200-R lacquered cast iron deep sump roof drain with 15” diameter anchor flange, 2” high cast iron external combined water dam and waterproofing membrane clamp ring, and standard self-locking polyethylene dome strainer with a free area of 125 square inches. |
No Rating |
Product Version: Unknown
186 Downloads
|
|
 |
MIFAB® Series R1200-PR15” lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, square adjustable collar and standard 15” (381) square ductile iron tractor grate with 3/8” (9) maximum width drainage slots and a free area of 80 square inches. |
No Rating |
Product Version: Unknown
166 Downloads
|
|
 |
MIFAB® Series R1200-JC lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches. |
No Rating |
Product Version: Unknown
60 Downloads
|
|
 |
MIFAB® Series R1200-HC lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, adjustable extension with auxiliary drainage slots, secondary clamp, and standard self-locking polyethylene dome strainer with a free area of 125 square inches. |
No Rating |
Product Version: Unknown
46 Downloads
|
|
 |
MIFAB® Series R1200-G lacquered cast iron deep sump roof drain with 15” diameter anchor flange, large cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 125 square inches. |
No Rating |
Product Version: Unknown
66 Downloads
|
|
 |
MIFAB® Series R1200 lacquered cast iron deep sump roof drain with 15” diameter anchor large cast iron membrane clamp ring with integral gravel stop, and standard self-locking polyethylene dome strainer with a free area of 125 square inches. |
No Rating |
Product Version: Unknown
632 Downloads
|
|
 |
MIFAB® Series R1150 combined roof drain and secondary overflow system, consisting of a galvanized sump receiver; two lacquered cast iron roof drain bodies with anchor flanges, cast iron waterproofing membrane clamp rings with integral gravel stops, one 4” (102) diameter adjustable ABS overflow standpipe and two self-locking metal dome strainers with a free area of 43 square inches each. |
No Rating |
Product Version: Unknown
1129 Downloads
|
|
 |
MIFAB® Series BIG- ___ -S HDPE rotational molded solids interceptor with solids holding capacity of ____ (indicate). Unit shall include: 3/8” uniform wall thickness, solids retention baffle with elevated 3” diameter passageway, adjustable lid system, sample port access and 4” no hub inlet and outlet connections. Steel encased composite lid provides a water / gas tight seal and has a minimum of 20,000 lbs. load capacity. The lid is designed in accordance with the loading requirements of AASHTO H20. |
No Rating |
Product Version: Unknown
101 Downloads
|
|
 |
MIFAB® Series R1100-RS lacquered cast iron roof deck condensate receptor drain with anchor flange, cast iron waterproofing membrane clamp ring with integral gravel stop, overflow and cast iron dome strainer. |
No Rating |
Product Version: Unknown
59 Downloads
|
|
 |
MIFAB® Series R1100-JC lacquered cast iron roof drain with anchor flange, cast iron waterproofing membrane clamp ring with integral gravel stop, 6” (152) high stainless steel perforated ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 43 square inches. |
No Rating |
Product Version: Unknown
107 Downloads
|
|
 |
MIFAB® Series R1100-PJ lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring, stainless steel perforated extension and standard 1” (25) thick, 8” (203) square adjustable ductile iron tractor grate. |
No Rating |
Product Version: Unknown
78 Downloads
|
|
 |
MIFAB® Series R1100-G lacquered cast iron roof drain with anchor flange, cast iron waterproofing membrane clamp ring with integral gravel stop, stainless steel perforated 6” (152) high ballast guard with ½” (13) round drainage openings and standard self-locking polyethylene dome strainer with a free area of 43 square inches. |
No Rating |
Product Version: Unknown
133 Downloads
|
|
 |
MIFAB® Series R1100-F lacquered cast iron roof drain with anchor flange, cast iron water proofing membrane clamp ring with integral gravel stop, accuflow parabolic weir (specify -F1, -F2, -F3 for one, two or three slots), and standard selflocking polydome strainer with a free area of 43 square inches. |
No Rating |
Product Version: Unknown
185 Downloads
|
|
 |
MIFAB® Series R1100-EU lacquered cast iron roof drain with anchor flange, cast iron waterproofing membrane clamp ring with integral gravel stop, adjustable cast iron extension flange, underdeck clamp and standard self-locking polyethylene dome strainer with a free area of 43 square inches. |
No Rating |
Product Version: Unknown
699 Downloads
|
|
 |
MIFAB® Series MI-XHUB (specify size) heavy duty shielded no hub couplings are manufactured with gaskets made from neoprene that meets the requirements of ASTM C564 housed inside a Type 304 stainless steel corrugated shield. Four (2” through 4” size), six (5” through 15” size) Type 304 stainless steel clamps tightened with 3/8” Type 305 stainless steel hex head screws surround the shield to
provide the sealing force.
MI- XHUB Series Couplings are tested and certified to the ASTM-C1540 and CSA B602 Standards and are listed with IAPMO. The MI-XHUB are also tested and certified by Intertek Testing Services to the CAN/ULC S102.2 “Smoke Test”. The MI-XHUB are tested by IAPMO to comply to the FM1680 Standard (except for markings). |
No Rating |
Product Version: Unknown
12 Downloads
|
|
 |
MIFAB® Series MI-TEE (specify size) of flexible rubber elbow couplings are manufactured from a flexible PVC that meets the requirements of ASTM C-564 and Type 300 Series of stainless steel clamps tightened (to 60 lbs. torque) with 5/16” Type 300 stainless steel hex head screws. The MI-TEE Series of flexible tees are listed with I.A.P.M.O. Non constant temperature rating is 140 F. |
No Rating |
Product Version: Unknown
345 Downloads
|
|
 |
Base with 14 gauge Galvanized Channel (13/16” high) |
No Rating |
Product Version: Unknown
42 Downloads
|
|
 |
MIFAB® Series MI-SOLID-TA top access powder epoxy coated 10 gauge fabricated steel solids interceptor with internal perforated sediment bucket and gasketed top access lid. Interceptor complete with no hub inlet on one side and no hub outlet on other side for flow through installation. |
No Rating |
Product Version: Unknown
30 Downloads
|
|
 |
MIFAB® Series MI-SOLID-SA side access Type 304 14 gauge stainless steel solids interceptor with internal stainless steel perforated sediment bucket connected to a removable and gasketed side access latched lid. Interceptor complete with 2” female threaded inlet, 2” female threaded outlet on each side for right or left hand installation and internal stainless steel flow control. |
No Rating |
Product Version: Unknown
23 Downloads
|
|