Forums >> Revit Building >> Technical Support >> finished floor on site plan

tymelius

active

Joined: Wed, Jul 18, 2007
4 Posts
No Rating

revit 2008.  I created a siteplan which I inserted into my two story house project. I moved the site around to show the house where it should be. How do I find out what the finished floor elevation is at? the elevation datums say 0'-0", but I need it to be coorelated to the site topo. Any info is appreciated!

This user is offline

kesflower

active

Joined: Thu, Jul 21, 2005
169 Posts

You have 2 choices.  You can either move the site to the elevation 0'-0" to match your project and then make a note on your elevations of where that is in the real world, or, you can change your level elevations to match your site.  (The second option is really going to mess things up if you're not careful.  I'd change the uppermost level first.  You'll see what I mean when you start changing levels).

Best of luck

-----------------------------------

Ruth Rau

Main Street Architecture, P.C.

This user is offline

tymelius

active

Joined: Wed, Jul 18, 2007
4 Posts
No Rating

Thank you KesFlower

that was a quick response 

This user is offline

Cant see site features in First Floor Plan

4

create a new site floor plan

3

Floor Plan with Rendered Site Plan

2

Linking Project in Site Plan... how to show buildings floor plan? (2010)

2

Underlay in Site Plan

3