Forums >> Revit Building >> Technical Support >> Actual Window Head height

daleyy

active

Joined: Mon, Nov 1, 2004
49 Posts

I trying to set up windows with a parameter that represents the Head height of the window.  No mater what I do I cannot get the actual head height (bottom of Header).

When creating a new window from the Revit template, I get Height which is also the cut in the wall which is also in reality the rough opening of the window and Sill Height.  When I place this as simple as it is in a wall in a project I get 2 instance parameters called Sill height and Head Height.  Both move the window.  This is what I want. 

When I go to place my actual window frame in the family, and set the Height of the window, and then place it into the wall the Head Height is displayed incorrectly.  I found out that the Head height that appeared is based on a hidden formula of Sill height + Height.  The incorrect thing that I noticed is that the actual head height of the window is the sill height + rough height. 

How can I get this to appear correctly?  I need to have a instance parameter that is called Head Height that is related to the rough opening height of the window.  If I enter 8'-0" in this parameter I get 8'-0" from level to top of rough opening of the window.  I also want this height to be the origin height of the window.  So if I am setting windows in elevation I am setting the head height say at 8'-0" again.

 I really need this to work this way.  I had this issue a while back for another firm I was setting up but now I am having the same issue with it on this firm.

 Thanks

-----------------------------------

DaleW

This user is offline

head height of window

2

Setting Window Head Height

14

Sill and head height of windows - in the dimension I can only show the actual

1

window is 1" off of head height

1

Pella Window Head Height Schedule Problem

3