Forums >> Revit Building >> Technical Support >> Cuts in Wall Sweeps

Leslie

active

Joined: Tue, Sep 16, 2003
25 Posts
No Rating

First Issue....We have created a canted stone sweep on the exterior of our building. I checked the cut by inserts box and the sweep nicely cuts around my windows & doors but does not set back the distance of the window/door trim. In the past I have used voids which provides blue dot grips that can be adjusted...no such luck now. Any suggestions on how to cut the sweeps back at selective places???

Second Issue...There are breaks in our sweeps where we did demo work or the sweep passes over existing verses new wall sections.

attached is image

This user is offline

Wall Sweep Overlaps window frames and cuts (some not all)

7

Angling Wall Sweeps

8

Wall Cuts

4

Walls with automatic wall sweeps

3

Outlets and Wall Sweeps

3