Forums >> Community >> Newbies >> Fascia box/ apex roof

revitstudent1984

active

Joined: Mon, Mar 20, 2017
0 Posts
No Rating

Hi all, new here so bear with me. Im looking to create a fascia box as in pic attached. Its driving me mad!! Any help appreciated.

James

Attached Images

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

You can't do this with out of the box elements.   I created a family to do this but I don't have it available to share.  You can create your own if you have done any families.  If I remember correctly, my family was level or floor based, had a fascia height adjustment, a return depth adjustment and a roof angle setting.  The material could also be set to match the fascia.

This user is offline

revitstudent1984

active

Joined: Mon, Mar 20, 2017
0 Posts
No Rating

Thank you. I havnt done any families yet as i am only using Revit for a couple of months but i will get practicing! Thanks again

This user is offline

Jimidy

active

Joined: Fri, Apr 7, 2017
0 Posts
No Rating

Actually it can be done using out of the box elements that are also catagorised correctly, I quickly threw together the attached project and image,

It is made up entirely of Fascias and soffits attached to either the roof or each other. the nice things about fascias is that they can attach to the edge of anything that has the roof category.

Hope this helps.

Attached Images

-----------------------------------

James Pegg

Managing Director / Revit Technician

Please visit our website for Laser Scanning and Point Cloud to BIM Services

This user is offline

View Website

Gable End Fascia

3

How to miter a fascia on a sloped roof?

1

Roof fascia curves in plan and elevation

9

Roof Fascia On Negative Sloped Roof

4

roof fascia

3