Forums >> Revit Building >> Technical Support >> door family muntins not visible on one side?

KennedyDrafting

active

Joined: Fri, Apr 24, 2015
0 Posts
No Rating

REVIT LT  2017

I have a door family that is only displaying some of the Muntins/window grills on one side.  Any ideas why?

Attached is the door family, a project with the door inserted and a pdf for illustration.

Thanks,

JK

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

This is a fmily issue.

Are the muttins full depth through the glass or are there seperate muttins on each side?

Cut a section through the door in the family and look where these muttins are.  They may be in the wrong plane.

Pick the muttins in the family individually and look at their display options.   They may be turned off.

This user is offline

KennedyDrafting

active

Joined: Fri, Apr 24, 2015
0 Posts
No Rating

The Muntins were locked to the wrong reference plane.  So when the door family was inserted into a project wall of a different thickness the muntins moved to the outside of the glass.

This user is offline

Door Family

6

Door family showing one thing in Family Editor another when placed into project.

3

Residential Window Muntins

0

door with side windows

1

Door Family Cut Plan

4