Forums >> General Discussion >> Revit Project Management >> Material takeoff: Walls appearing in wrong takeoff

revituser01

active

Joined: Tue, Dec 15, 2015
0 Posts
No Rating

Hi,

I hope someone can help me. I'm creating materail takeoffs and several walls that are not composed of a specific material, do appear in the takeoff.

Ex: an exterior wall composed of concrete bricks appear in the take off of clay bricks walls, even if they don't have clay bricks in their composition.

- I have changed the composition of the concrete walls, but the problem continues: when I add the concrete brick, it appears in the clay brick takeoff. 

- I have created new clay bricks and added to the clay brick walls, but these walls will appear in both takeoffs: the concrete and the clay...

Does someone have an explanation?

Thank you for the answer,

Chris

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
19889 Posts

Sorry that I can't point you exactly to your mistake.   It is probably one of your wall definitions.  Look again at this concrete wall and the actual material definition.   Post an image of that material's properties if you don't see the problem.

This user is offline

REVIT 2015 material takeoff, gross area issue

11

Wall Material Takeoff vs. Wall Quantity Takeoff for material description

0

Material Takeoff

5

Differences between Schedule and Material Takeoff Schedule?

1

Ploblem with material take off

4