|
active
Joined: Mon, Jul 14, 2014
0 Posts
No Rating |
Hey RevitCity, I'm having a bit of trouble with my hatch pattern in Revit 2016 and can't figure out what is going wrong. Here's the image ( http://imgur.com/naE8sQ8  , as you can see there's a little line that shouldn't be there, it's about 7mm long. Has anyone experienced this and/or have a solution? Thanks!
*.pat file text follows:
;%UNITS=MM
;%VERSION=3.0
*67x202
;%TYPE=MODEL
0,0,0,0,67,0,0
90,0,0,0,202,67,-67,67,-67,67,-67
90,101,0,0,202,-67,67,-67,67,-134
90,50.5,0,0,101,-335,67
|
|
active
Joined: Tue, Jan 27, 2004
80 Posts
 |
Weird how different systems interpret paradoxical data.
If you reduce the horizontal line spec from
0,0,0,0,67,0,0
to
0,0,0,0,67
then the blips disappear.
As it's an unbroken line it needs no dash information at all.
The new specification describes a set of unbroken horizontals.
The original described a set of horzontals made up of dashes of zero length. A bit of a tough ask.
Thank you, HatchKit will have a new inbuilt diagnostic shortly 
Hugh Adamson
www.hatchkit.com.au
|
Search