Forums >> Revit Building >> Technical Support >> Custom Window Cut

mystykal06

active

Joined: Thu, Oct 10, 2013
1 Posts
No Rating

Hi everyone,

I spent several hours on how i could get a custom window cut on a window family. There is some information regarding custom window cuts, but i couldn't find anything close to what i am trying to achieve. I attached a picture so you guys can point me to the right direction on what technique i should use. You dont need to make it for me, just share how you would tackle this problem.

Thank you for your time.

Attached Images

This user is offline

teafoe5

site moderator|||

Joined: Fri, Nov 12, 2010
1749 Posts

Are you tring to do this in section only? If so you can use the Cut Profile tool.  You could also do this using a wall reveal or in-place void to cut your wall

This user is offline

View Website

mystykal06

active

Joined: Thu, Oct 10, 2013
1 Posts
No Rating

Thanks teafoe5, i ended up solving this problem, i used your sugestion: in place void. 

Thank you for the quick reply.

This user is offline

window does not get cut in plan view.

6

Window family doesn't cut properly in plan

3

Custom Window Frame

0

Custom Window Opeing in revit 2010

4

Custom window family glazing problem

4