|
|
|
Home | Forums |
Downloads | Gallery |
News & Articles | Resources |
Jobs | FAQ |
| Join |
Welcome !
|
89 Users Online (88 Members):
Show Users Online
- Most ever was 626 - Mon, Jan 12, 2015 at 2:00:17 PM |
Forums
|
Forums >> Revit Building >> Technical Support >> Stair break line problem
|
|
|
active
Joined: Mon, May 23, 2011
124 Posts
 |
hey guys is there a fix for this problem yet?
-----------------------------------
Revit 2018........ |
This user is offline |
|
 | |
|
|
site moderator|||
Joined: Tue, May 16, 2006
13079 Posts
 |
I've not seen this before so if I have time, I'll check it out. You don't say what Revit so nobody can really answer your question.
Try adding a plan region around the stair. If that doesn't help, then try doing the stair from the level above going down.
|
This user is offline |
|
|
|
active
Joined: Fri, Apr 20, 2007
5 Posts
 |
In the Stair properties, click on the Cut Mark Type.
You now see the properties of the "Single Zigzag" Cut Mark. Change the Cut Line Angle untill you get the result you need. Also, duplicate this Cut Mark Type first, so you don't go changing the Cut Marks in the entire project.
|
This user is offline |
View Website
|
|
|
site moderator|||
Joined: Tue, May 16, 2006
13079 Posts
|
Thanks Kim for pointing that out.
Jamie, the control that Kim points out is not available in 2012 and earlier versions of Revit.
|
This user is offline |
|
|
|
active
Joined: Mon, May 23, 2011
124 Posts
|
at work we use Revit 2015 LT as shown in first pic attached. This worked for my other stairs but not the problem one... Maybe I'll delete it and try again. Thanks for your help!
-----------------------------------
Revit 2018........ |
This user is offline |
|
|
|
active
Joined: Mon, May 23, 2011
124 Posts
|
everything I do it still stays the same....
-----------------------------------
Revit 2018........ |
This user is offline |
|
|
|
site moderator|||
Joined: Tue, May 16, 2006
13079 Posts
|
Did you see the setting that Kim posted? If not then you don't have the ability to do this. It is only for component stairs.
|
This user is offline |
|
|
|
active
Joined: Mon, May 23, 2011
124 Posts
|
Yeah Kim's way works on all my other stairs but this one. Once the break line goes to this position it doesnt move. Not sure if a bug or I'm missing something...
-----------------------------------
Revit 2018........ |
This user is offline |
|
|
|
Similar Threads |
|
Stair break line problem |
Revit Building >> Technical Support
|
Fri, Jul 17, 2020 at 4:21:45 PM
|
7
|
|
Stair Break Line Customization |
Revit Building >> Technical Support
|
Mon, Dec 12, 2011 at 4:20:09 AM
|
3
|
|
Stair break line (Revit 2008) |
Revit Building >> Technical Support
|
Mon, May 12, 2008 at 7:43:21 AM
|
1
|
|
Can't modify (or switch) stair cut line/break line |
Revit Building >> Technical Support
|
Wed, May 11, 2016 at 10:58:08 AM
|
2
|
|
Break Line & Weld sybol families |
Community >> The Studio
|
Wed, Apr 28, 2010 at 9:18:41 PM
|
6
|
|
|
Site Stats
Members: | 1986997 | Objects: | 22874 | Forum Posts: | 152182 | Job Listings: | 3 |
|
Search
