Forums >> Revit Building >> Technical Support >> finish/ material schedule

ledgewood33

active

Joined: Wed, Jan 27, 2010
34 Posts
No Rating

I am wanting to create a finish schedule that has always been done in CAD. I would like it to reference the MARK/ KEY in the schedule and drawings. I am attaching a PDF of what is done in CAD in the past and is what I would like to replicate.

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

So do you want a dumb schedule or a smart one?

This could be smart as a multicategory schedule using the same shared parameters assigned to your model elements.

Obviously, as a dumb schedule, you can just do it in a drafting or legend view as you did in CAD.  Or you can create a schedule key using a category that is not normally used in your project.  You can find threads here about using a schedule key.

This user is offline

ledgewood33

active

Joined: Wed, Jan 27, 2010
34 Posts
No Rating

sorry for not clarifying. also I am using 2013 & 2014.

I would like it to be as smart as possible. meaning that I would like the marks on the schedule to match the tags on the

drawings and the use of any other categories provided.

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Here is a description of using a multi-category schedule:

http://docs.autodesk.com/REVITST/2010/ENU/Revit%20Structure%202010%20Users%20Guide/RST/index.html?url=WS46b90c3cb2c58cad1cb25f1fc7fa49ed4-7fed.htm,topicNumber=d0e17289

NOTE:  You need to create shared parameters and assign those to all elements to be scheduled.  You can assign those as project parameters picking the multiple categories.

This user is offline

Finish Material Schedule

0

Schedule material mark in door schedule - Revit 2014

7

Revit 2016 Room finish schedule and material schedule

0

Key Schedules/Finish schedule

1

Finish Schedule

1