Forums >> Revit Building >> Technical Support >> 1 1/2 story house

camerongood210

active

Joined: Tue, May 12, 2009
10 Posts

Revit guru's: We're working on a 1 1/2 story house (Revit 2013) and we're running into a little trouble on the "1/2" story floor plan. (This 1/2 story is under a 10/12 roof). Basically, the problem is that some of the walls closer to the perimeter of this 1/2 story show up as "projection" instead of "cut" because they're not actually being cut in the view. We could adjust the view's cut elevation, but then other objects don't appear as you would like. 

This means the wall components/layers don't show up (i.e. siding, plywood sheathing, stud framing, gyp. bd., etc.). Instead, all you get are the two lines indicating the outer-most sides of the wall. We really want these components/layers to show up, so we could just draw those in with old-school lines. Surely you guys have come across this one before. What do you suggest?

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Look into plan regions.  You can read about how to do those in your HELP.

This user is offline

camerongood210

active

Joined: Tue, May 12, 2009
10 Posts

Thanks for your help. I will happily look this up in help, but I wouldn't have known what to look for had I not asked here. Thanks again.

This user is offline

How to model floor joists correctly in 2 story residential

1

Two-story windows, please help!

5

Roof doesn't show up on floor plan

0

2 story areas

3

New sections views show every story in my 75 story project!

2