Forums >> Community >> Newbies >> constraints not satisfied... driving me crazy

kerberg

active

Joined: Sat, Nov 2, 2013
4 Posts
No Rating

So i have such a simple adaptive model here and i cant seem to wrap my head around the logic of the parameter and why every time i it gives me a constraint not satisfied complaint. !

I have four adaptive points. I make a reference point, moved forward in the z, drew a diagnol between that moved point and on that diagnol drew a point . then I made 3 panels from these points... when i try to parameterize it it gives me the constraint not satisfied ! 

any help is appreciated Thanks -Ethan

This user is offline

cganiere

active

Joined: Tue, Feb 15, 2005
75 Posts

Create only reference plans or reference points first. Then set up your parameters. Test the references. Once the references work then add your adaptive points.

-----------------------------------

Christopher Ganiere, NCARB, LEED AP

www.developmentone.net

Skype: ArchitectCRG

This user is offline

View Website

kerberg

active

Joined: Sat, Nov 2, 2013
4 Posts
No Rating

thanks for your reply! I'm sitting down tonight to rewatch some tutorials http://vimeo.com/50769957

and understand the proper order of the workflow better! Thanks again-Ethan

This user is offline

Constraints Are Not Satisfied when opening file - Revit Architecture 2008

2

Constraints not Satisfied

1

Constraints r not satisfied

9

"Constraints are not satisfied"

3

Tag is driving me Crazy

0