Forums >> Revit Building >> Technical Support >> Settings for stringer

SINOSLO

active

Joined: Tue, Sep 3, 2013
17 Posts
No Rating

Hi 

Is it possible to control the dimensions separately for stringers on the side and stringer on the middle landing?

My setting in Revit is:

Stringer carriage height=50mm

Landing carriage height=250mm

Stringer height =300mm

Tread thickness=30mm

So DIM 1 becomes 20mm, DIM 2 becomes 75mm and DIM 3 becomes 50mm

(Please see the attached picture)

What I want to do is to keep DIM 1=20mm, but change DIM 2 to 25mm and DIM 3 to 100mm.

I have tried to change the stringer carriage heigh and Landing carriage height.

However I have never got the result I wanted.

DIM 1 always changes together with DIM 2 and DIM 3.

Is it possible to keep DIM 1 but change DIM 2 and DIM 3?

Thank you very much

Attached Images

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Just change the landing carriage height.

The one on left is 5 1/2" - the one on the right is 10".

Attached Images

This user is offline

SINOSLO

active

Joined: Tue, Sep 3, 2013
17 Posts
No Rating

Hi 

Thank you again.

I don't know why I couldnt make it like you did (keep DIM2 and 3, but change DIM 1)

Please see the attached pictures.

The first one: 

Stringer carriage height=50

Landing carriage height=250

the second one:

Stringer carriage height=150

Landing carriage height=150

My DIM 1/2/3 always change at the same time......

Attached Images

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

We continuously ask for members to include in their posts what Revit they are using and also what their latest update was.  You did not include this information and I suspect you will find the problem is there.  You really waste our time when you do that.

This user is offline

SINOSLO

active

Joined: Tue, Sep 3, 2013
17 Posts
No Rating

Sorry about that.

I use Revit architecture 2013 like I said in the other post I sent at the same time.

But I guess you got too many posts then, and I should probably have said it again. 

On the other hand, "autodesk_revit_architecture_2013-x64_update3" was the latest update.

Hope I have offered enough information and you would like to answer again.

Thank you

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Here is a 2013 model of the same set of stairs and it works for me.

Build 20130531_2115(x64)Update Release 3

Attached Images

This user is offline

Stringer Haunch (level off) at top of flight

8

Stair Stringer Question

8

Need Help on Stringer

4

middle stringer on landing

4

Stringer Issue

4