Forums >> Revit Building >> Technical Support >> Filter for in-place families

TKennedy

active

Joined: Wed, Oct 7, 2009
654 Posts

I've been beating my head against this problem for a while now with no solutions. I'd like to be able to filter in-place families so I can highlight them in a view, but I'm not seeing anything I can use to do that automatically. I would like to avoid using a parameter I have to fill out on my own, manually identifiying them defeats the purpose of this exercise. The problem is, I don't know what else I can use that will identify in-place families. Any ideas?

This user is offline

Pavan

active

Joined: Sat, Mar 19, 2005
157 Posts

After finishing the family select the family and in the Properties assign some value in the 'Comments'.

Using this you can filter. I tried with Casework In-Place families.

Attached Images

-----------------------------------

Pavan Reddy

Revit Manager

Intelligence is not always knowing the answers, it's always asking the questions.

This user is offline

TKennedy

active

Joined: Wed, Oct 7, 2009
654 Posts

Thanks, but that was what I was hoping to avoid. I don't want to have to remember (or train my users to remember) to manually add somthing to the family.

This user is offline

Materials for in-place families

10

In place families above the view range are still appearing

6

Massing Vs. In-Place Families

5

Why In-Place Families?

3

Changing In-Place Families into Seperate Families

2