Forums >> Revit Building >> Technical Support >> Mass Floors not all showing up - some missing

cadboi08

active

Joined: Sat, Jan 23, 2010
11 Posts
No Rating

Hi,

Using Revit Architecture 2011, I've model a few In-place masses and tried to Mass Floors for Levels G, 1-6. For some reason it's only creating the Mass Floors for Levels G and 1, nothing from 2-6, despite them all being ticked on.

The mass is a gradually sloping one, ramping and steping up from Level G up to Level 6 - not sure if this is causing the problem?

I've checked the VG overrides and masses/mass floors are on. I've checked hidden elements. I'm not using worksets or anything - it's a pretty simple file (some design options were used, but all this stuff should be in the main model).

Cheers

-----------------------------------

Check out RevitTube for Awesome Revit Videos Daily - https://www.youtube.com/channel/UCl-rjEtxDTE0DOrtqOV8aKw

This user is offline

cadboi08

active

Joined: Sat, Jan 23, 2010
11 Posts
No Rating

After a full days work they somehow reappeared. . . after making some changes to one of the voids in the mass. No idea why/what happened - but still interested to know if others have experienced mass floors missing.

-----------------------------------

Check out RevitTube for Awesome Revit Videos Daily - https://www.youtube.com/channel/UCl-rjEtxDTE0DOrtqOV8aKw

This user is offline

extruded generic model and mass floors (2012)

5

Mass Floors with a Minimum Height/Clearance

2

trimming mass floors revit 2011

1

Autocad 2011 Solid To Revit 2011 Mass floor error

2

Problem with a floor slab with Mass

1