|
active
Joined: Thu, Sep 1, 2011
1 Posts
No Rating |
Hi guys
I've been using the information from this forum to create a new hatch pat based on the autocad pat file. I just copy the line command from the ACAD.pat and pasted it in a new Revit pat file. I changed the distance between the points and the angle to draw the hatch, but it is not showing like the dots hatch in AutoCAD, it is actually following a funny pattern instead.
I don't understand why it works differently in AutoCAD and Revit, apparently this happens only with the dots pattern. I tried with other patterns from the CAD file and they work perfectly.
See the text I included in the revit pat file:
DOTS, A series of dots;%TYPE=DRAFTING45, 0,0, .03125,.0625, 0,-.0625
Any help or advice will be appreciated.
Edited on: Fri, Oct 28, 2011 at 5:58:17 AM
|
|
active
Joined: Thu, Oct 18, 2007
5 Posts
No Rating |
Not sure how helpfull this will be, but I use a addin program called hatch 22. If you google it you will get it. I use it to create new hatch patterns and if works well. Might be an option or a tool for a later use if not applicable right now.
|
Search
