Forums >> Revit Building >> Technical Support >> Schedules adding two different subtotals together

pwa1

active

Joined: Mon, Mar 2, 2009
3 Posts
No Rating

Hi all,

I am scheduling Areas for Townplanning purposes. I have Existing and Proposed. The Areas in the proposed Schedule have actually been multiplied by 1.1 for flexibility in the approval.

The areas in the Existing Schedule are kept as the actual figures....now I want to add the Proposed Figure (multiplied by 1.1) and the Existing Figure....but when i try to do it, I seem to either get both figures multiplied by 1.1 or not multiplied at all. (ie. Proposed = 110m² / Existing = 100m².....total should be 110m² however i can only get 100m² or 120m²

The way i set up the 1.1 multiplier was (Area/1) *1.1 and called it "Gross Area"

Any ideas? Can i actually say i want the grand total from Proposed Gross Area to be added to Grand Total Existing Area (not Gross Area)?

TIA

Andrew

This user is offline

How to hide rooms in schedule,, show only subtotals?

0

Mass Schedule Subtotals for Large Project

2

ADDING WALL HEIGHT PARAMETER TO WALL SCHEDULES

4

Schedules

3

which parameters can have totals in schedules?

2