Forums >> Revit Building >> Technical Support >> Wall sweeps causing elevations to print black

cj2k1

active

Joined: Wed, Aug 30, 2006
1 Posts
No Rating

We are using a timber cladding panel on one of our projects, the panels have a timber profile that I have added into the wall structure as a sweep. The wall is that added into a stacked wall with a lower metal panel and a concrete base.

When I come to print the elevations at 1:200 with a visual style of "shaded with edges", the walls print black as the sweeps are quite small. I have looked at the possibility of using different visibilty settings but the others do not appear as we would wish.

I need to find someway of either turning the sweeps off on the elevations or removing the black outline of just the sweeps in this visual style. So far I have been unable to find a solution, i'm hoping that someone on here will be able to point me in the right direction?  

This user is offline

Outlets and Wall Sweeps

3

Revit Family causing print issues

1

Print settings

1

Angling Wall Sweeps

8

Vanishing Wall Sweeps

2