|
Forums >> Revit Building >> Technical Support >> Topography problem
|
|
|
active
Joined: Fri, Jun 3, 2011
6 Posts
No Rating |
I can see my model below the topography line in elevation. Does any one know how to fix it?
|
This user is offline |
|
 |
|
|
|
site moderator|||
Joined: Tue, May 16, 2006
13079 Posts
 |
Do you mean in an elevation or section view? If so, goto the Massing & Site tab, the Model Site pulldown arrown and set the elevation of your poche base as well as the section cut material.
|
This user is offline |
|
|
|
active
Joined: Fri, Jun 3, 2011
6 Posts
No Rating |
http://screencast.com/t/1PSfZCJqsG
Here is the screen shot. What part did I need to change?
|
This user is offline |
|
|
|
site moderator|||
Joined: Tue, May 16, 2006
13079 Posts
|
How about a screen shot explaining your problem? Your topo settings look right so I don't understand your problem.
|
This user is offline |
|
|
|
active
Joined: Mon, May 23, 2011
124 Posts
 |
Here my problem ( I did attach pic hope it works )
-----------------------------------
Revit 2018........ |
This user is offline |
|
|
|
active
Joined: Mon, May 23, 2011
124 Posts
|
http://screencast.com/t/hUsTt3ZVh3t4
-----------------------------------
Revit 2018........ |
This user is offline |
|
|
|
site moderator|||
Joined: Tue, May 16, 2006
13079 Posts
|
This is an easy one. You don't have site/topography on in VG.
|
This user is offline |
|
|
|
site moderator|||
Joined: Tue, May 16, 2006
13079 Posts
|
Or... your elevation does not cut your site.
|
This user is offline |
|
|
|
active
Joined: Mon, May 23, 2011
124 Posts
|
I see so the elevation view (icon) must be in the topography but now this is showing a cut through like a section showing earth fill there was a way to change this in the VG settings but I cant remember how. Hoping you do...
-----------------------------------
Revit 2018........ |
This user is offline |
|
|
|
site moderator|||
Joined: Tue, May 16, 2006
13079 Posts
|
As I responded earlier:> "If so, goto the Massing & Site tab, the Model Site pulldown arrown and set the elevation of your poche base as well as the section cut material."
|
This user is offline |
|
|
|
|
|
active
Joined: Mon, May 23, 2011
124 Posts
|
Yeah that works only thing is it does it for the section aswell when I want to see the fill.
-----------------------------------
Revit 2018........ |
This user is offline |
|
|
|
Similar Threads |
|
TOPOGRAPHY SPLIT PROBLEM |
Revit Structure >> Technical Support
|
Mon, Sep 22, 2008 at 2:51:42 PM
|
4
|
|
TOPOGRAPHY PROBLEM |
Revit Building >> Technical Support
|
Wed, Jan 27, 2010 at 10:47:10 AM
|
1
|
|
problem pads and subregions , weird depression on topography |
Revit Building >> Technical Support
|
Sun, Mar 22, 2015 at 1:46:45 PM
|
7
|
|
Topography |
Revit Building >> Technical Support
|
Wed, Oct 19, 2016 at 6:19:21 AM
|
2
|
|
Topography dissapearing |
Revit Building >> Technical Support
|
Wed, Nov 7, 2012 at 2:46:15 PM
|
2
|
|
Search