Forums >> Revit Building >> Technical Support >> Walls and families have become transparent?!

keyaggie

active

Joined: Tue, Mar 20, 2007
50 Posts
No Rating

My project was not being worked on for a week and when I opened it up all my walls and some of my families are transparent.

I know it wasn't like this last week.  I have tried all the VG settings to no end.

Anyone have anything like this happen or ideas on how to fix?

(Revit 2011)

Thanks,

Key

This user is offline

View Website

keyaggie

active

Joined: Tue, Mar 20, 2007
50 Posts
No Rating

just wanted to update:

turns out my file became corrupt (i suspect from a DWG).

I had to go back a week for a good file- fortunately we had  not done too much work and the copy/pasting is splendid.

blankety blank happens.

This user is offline

View Website

dgcad

active

Joined: Thu, Mar 17, 2005
1231 Posts

-----------------------------------

FULL 'DOWNLOAD ACCESS' to all 850+ CADclips videos for only $150

This user is offline

View Website

tarahdb

active

Joined: Thu, Apr 10, 2008
19 Posts

I know this thread is old but I had a similar problem and found a solution... so maybe it will help someone searching the forum.

Only my walls became transparent, and it was only one wall type.  No, wireframe wasn't turned on.  And I checked all the view settings (furthermore, it was a problem in every view.)  I have to think the family became corrupt.  I, too, had recently done some DWG importing (of a survey.)  

I was able to fix the problem by changing the walls to a different type.  So basically, I ended up creating a new wall type that was the same as the corrupt one (not by doing a duplicate of the corrupt type though... tried that first and it didn't work, I had to create the wall type again from scratch), selected one of the corrupt walls, right clicked and chose "selects all instances in entire project," and changed all the wall instances to the new wall type.

Hope that helps someone.

This user is offline

tarahdb

active

Joined: Thu, Apr 10, 2008
19 Posts

p.s. I am Revit 2014 so apparently it is still a problem

This user is offline

rod23

active

Joined: Wed, Dec 2, 2009
89 Posts

Update your video card drivers.

-----------------------------------

http://www.turbosquid.com/Search/Artists/Revitaoist

This user is offline

Hare13

active

Joined: Sat, Sep 10, 2016
0 Posts
No Rating

I know this is an old thread but I was having the same problem. It occured after I had linked in a DWG. After trying all of the VG settings and nothing happened. I read that it could be from the DWG file. So I unloaded it and everything went back to normal. A very simple fix after I sent a lot of time going through different settings. Hope this helps someone else.

This user is offline

Floors and walls being transparent in 3D view

11

solid walls transparent to curtain walls and railings in back..

6

Non Transparent Curtain walls in 3D View?????????

4

Families show up transparent in plan

2

Transparent Families

2