Forums >> Revit Building >> Technical Support >> Unable to create a wall by face

raffit

active

Joined: Wed, Mar 26, 2008
9 Posts
No Rating

Hi,

Still a bit new to Revit: using v. 2010 at work but have access to 2011 too.

I have been trying unsuccessfully to have a channel glass curtain wall (Pilkington Profilit), downloaded from the AutoDesk SEEK site, conform to the curvilinear part of a mass entity.  The latter was created using a spline curve.  That, coupled with the functionality provided by the spline used as a reference line is what I need in terms of editability.  However no go with the channel glass system.  I have the feeling that the channel glass family does not "like" the splines, even though it works fine with arcs of radii tighter than any of the splines.

 Any thoughts or suggestions of things I may try?

 Thanks,

Raffi 

This user is offline

Roof by Face and Wall by face tools

7

Wall Reveal by Face in 2010

5

Unable to Create Domed Roof

1

unable to create shed roof for curved wall

5

Stack Wall Problem

5