Forums >> Revit Building >> Technical Support >> Filter by Phase

MikeSoucy

active

Joined: Wed, Mar 10, 2010
9 Posts
No Rating

I'd like to know if there is a way to set up a filter by a particular phase. For example, if we draft Domestic Hot Water piping it shows up red with 2 dashed lines. We have the existing phase graphic override set to a brown color. This works well with setting up a new view with existing work showing. However when we put the Domestic Hot Water filter into the New view it now overrides the phase graphics. One solution we came up with was to create 2 seperate families of pipe types, one new and one existing. However, if there is a way to create a filter that reads the phase it would solve our problem. We could simply put that phase filter at the top of list and no longer have to worry about the new phase filters overriding them. Any input would be greatly appreciated.

This user is offline

MikeSoucy

active

Joined: Wed, Mar 10, 2010
9 Posts
No Rating

I still really need a way to do filter by the phase. It would make my life so much easier.

 We created different line types with filters. However, when I go to demo those pipes the phase graphics are overridden by the filters in the view. Really sucks.

This user is offline

Phase Filter

1

R-17 Wanting to change the phase filter setting in a Walk Through......

5

Filtering a phase that you have created

4

Walls set as existing not showing up in existing phase settings.

3

New opening cut showing in Existing elevation with [show complete] filter

1