Forums >> Revit Structure >> Technical Support >> Please Read Project falling apart!!!!!!!!!!!!!!

86Supra

active

Joined: Wed, Nov 12, 2008
8 Posts

When i select anything from a floor or a  grid line or a door or column it is moving itself i dont know what i have checked that would cause this or why it is all of the sudden acting crazy. Basicly i messed up the whole project so i def have to start over. The problem is when i created a new drawing i drew a couple wall just to see and it is still doing it

Please see attached

This user is offline

86Supra

active

Joined: Wed, Nov 12, 2008
8 Posts

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

Without some examples - we may not be able to help but there are some possible problems.

Look on your options bar.  Is press and drag on?  Turn that off until you understand the problems it can give you.

Watch out for crossing and even window selections.  What you see is not necessarily what you picked ....  This is a 3D world and you need to keep track of your view depths.  There is something else on the otherside of that wall or floor when you pick with windows.  This is why it is very important to always look in your filter (funnel) oin the options bar to see what you have picked.

Finally, if you have items that have been placed with "moves with nearby elements" checked, then the item will move.  Locked dimensions and alignments will also result in other items moving.

This user is offline

86Supra

active

Joined: Wed, Nov 12, 2008
8 Posts

thats great i dont know how it got check but it fixed the problem

thanks for the great advice

This user is offline

Room tags At Sections

0

falling blocks. help please

5

Parameter to read if family is flipped

5

Mirroring

1

Read Only

1