Forums >> Revit Building >> Technical Support >> Room Elevations - Side walls not Printing???

jakubc7

active

Joined: Wed, Nov 19, 2008
24 Posts
No Rating

As a standard I have never shown the actual wall thickness on room elevations, and still do not want to.

Basically i just want to see a line to each side of elevation ... if there is a wall there.

I trim my room layout view to touch edge of the wall. On sheet they all appear to have a line to at edge of the wall.

I do not want to have to show my crop box as quite often it just doesnt work depending on the room layout ... so i always want to hide it.

When i print most of the walls show, but a lot do not. Is this a common problem.

Am i doing something wrong? Or do I just have to draw lines to edges of room.

Thanks.///

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

A couple of choices:

1. Add a line ... I hate this.
2. Pull you elevation grip just beyond the edge of the wall ...What I do
3. Turn on view crop window and print with the "print the view crop window " selected.

This user is offline

jakubc7

active

Joined: Wed, Nov 19, 2008
24 Posts
No Rating

hmmm very frustrating ... i thought it might be a case.

sounds like no.2 is a way to go.

while on the subject ... any suggestion on how to best stretch the cop view by a set distance.

say 2mm into the wall, everytime...to keep things consistant.

anyways, thanks in advance

jakub c

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

No idea how - Hope someonelse can tell us - I think AutoDESK should fix this one.

This user is offline

Phasing is interfering with Room Area/Tags (I think)

1

Printing Shaded Elevations to PDF

1

Printing issues - elevations

1

Please Help - How to get Level Tags on same side of all elevations??

6

Room Tags and Detached Walls

3