Forums >> Revit Systems >> Technical Support >> Pipe Sizes

bjdavis

active

Joined: Wed, Apr 23, 2008
1 Posts
No Rating

I am trying to draw a 3/4" pipe. The drop down list does not show it butit is in the sizing table under Mechanical Settings. If you type in .75 it jumps up to one inch. ANy ideas on how to get 3/4" pipe available to draw. When autosizing 3/4" pipe is generated. We are using Revit 2009.

Thanks,

Brian

This user is offline

Mattman2248

active

Joined: Thu, May 8, 2008
32 Posts
No Rating

Brian,

We had this problem and found that if you go into your settings--> project units, change the Discipline to piping and click on the pipe zize under format the Units were in fractional inches, and the rounding was to the nearest 1/2", if you change this to nearest 1/4" the drop down for pipe sizes will then show 3/4" pipe and sizes in the 1/4" range.

Matt

-----------------------------------

Revit was once a 5 letter swear word for me....

This user is offline

View Website

Calculating Pipe Sizes

1

Revit 2012 MEP pipe sizes

1

Revit MEP Custom User Pipe Sizes Not Available When Drawing Pipes

2

Revit MEP 2012 - Transfer Pipe Size & Pipe Materials bug?

1

Trim HSS Round pipe into another HSS Round pipe

2