Forums >> Revit Building >> Technical Support >> Section Lines not showing up on a plan

RNLRNL

active

Joined: Tue, Feb 12, 2008
33 Posts
No Rating

I have section lines which cut through the building but aren't showing up on the roof plan. I have checked the hide unhide command and they aren't hidden. I have checked that the sectyion lines should appear on the scale I am working to and in the course mode so this isn't the issue. On floors lower down some section lines appear and other dont.

Is there a parameter to control on what heights section lines will be visible or are thre any other suggestions to resolve this problem.

This user is offline

JAMESHGRIMES

site moderator|||

Joined: Fri, Apr 14, 2006
584 Posts

The section symbol will only show up if the vertical extent passes into the view range. If a section doesn't show you will need to adjust the top extent until it does.

This user is offline

Section lines disappear

3

Lines not showing on elevation and cross section views

1

Ceiling Model Lines Showing up on Floor Plan

1

Missing Section Marks on Floor Plan

13

Building Section callout not showing in plan views

10