Forums >> Revit Building >> Technical Support >> Wall Reveal Clean-up

jarosa

active

Joined: Mon, Feb 18, 2008
251 Posts

One wall reveal is 1.5"x8" and the other is 6"x8". How do i get them to meet at the corner so the shelf is continuous?

This user is offline

View Website

cganiere

active

Joined: Tue, Feb 15, 2005
75 Posts

Are the two walls the same wall type?

If they are different construction they may not clean up properly. The materials in wall construction are [1], [2], ...[5]. Wall 'a' will clean up with wall 'b' if they have the same order/stack of materials.

-----------------------------------

Christopher Ganiere, NCARB, LEED AP

www.developmentone.net

Skype: ArchitectCRG

This user is offline

View Website

jarosa

active

Joined: Mon, Feb 18, 2008
251 Posts

Chris,

I got the answer to the first wall clean up. I had to adjust the level constraints of the walls so they were the same for all the first and then all second floors at this corner. Then I pulled and trimmed them back so they are correct. I think the combo wall wanted to fill in a void between the first and second floors.

Does anyone know how to adjust the clean up of the sweeps in the foundation so the shelf is continuous? see the second attachement.

Thanks

John

This user is offline

View Website

Wall clean-up

0

how to add a self made reveal to a wall while edit wall types?

4

Wall Reveal - not behaving

3

Wall Reveal-Please HELP!!!!!

2

REVEAL QUESTIION

9