|
active
Joined: Mon, Jun 19, 2006
21 Posts
No Rating |
hi there please can some1 help me this. if i try to do a wall sweep with 2 different profiles the 1st profile always changes to what the 2nd profil is so then all the sweeps become the same.
|
|
site moderator|||
Joined: Tue, May 22, 2007
5921 Posts
 |
Hi, if you create a family to create your Wall Sweep with "Generic Profile" or "Generic Profile-Hosted" you will see you only can drew ONE Profile, so there is the problem you have, in that case my advise is  and i do this) create a family with "Generic Model FACE based" or "Generic Model Wall Based" to create this sweep, with parameters of lenght, with and so one to be paramétric and you can control your sweep or use "create in place" to do what you want..., i don't know what kind of sweep are you trying to do, so, i can tell Exactly the best solution to your problem, by the way, did you solve the problem you have with "Muslam Mesquit", the "Dome Roof Cupola"??
-----------------------------------
I Hope and I Wish to LEARN more, and more, and more.... REVIT |
Search