Forums >> Revit Building >> Technical Support >> how to angle end of wall

jeffrb25

active

Joined: Thu, Jan 10, 2008
38 Posts
No Rating

I have a wall that has no adjoining wall at its end and I want to angle that corner.  Also, how can you add a wall sweep reveal to the end face of wall so that the exterior reveal wraps to face of wall end?

This user is offline

WWHub

site moderator|||

Joined: Tue, May 16, 2006
13079 Posts

If you are saying that you want to angle the wall in plan (you are not clear), just add a vertical sweep ... reveal or positive - up to you.

No reveals will wrap the ends of a wall.  To acccomplish both of your questions, create an in-place wall family at the end of your wall and join geometry with your wall. 

This user is offline

jeffrb25

active

Joined: Thu, Jan 10, 2008
38 Posts
No Rating

Yes in plan, I want to chop the corner of the wall at an angle.  Sounds like a vertical reveal could work.  The wall extends into the diagonal cooridor which wants to share thate diagonal angle. 

Regarding the reveal at wall end I will try the in-place wall and join geometry to wrap the exterior reveal.

 Thanks for your help

This user is offline

Vertical reveals to angle wall end

1

Wall end at an angle

5

Angle curtain wall

1

create a wall sweep on an angled wall (gable end wall) (2017)

4

Curtain wall to wall at an angle

3