Watts Dead Level Z Parking Deck Channel System with 6 in (152mm) wide x 48 in (1219mm) long (standard) ductile iron frame with integral deck flange, UV stabilized talc-filled polypropylene channels with integral 4 in IPS threaded bottom outlet. System shall be frame-anchored, with (specify) grating to suit DIN Class (specify) load rating. System to include frame connectors, grate lockdowns, and construction covers. System can be specified in 1 in (305mm) increments. Installation to be performed in accordance with manufacturer's recommendations.

Product Version: Revit MEP 2014

719 Downloads

Series LF1170, LFL1170 Lead Free* Hot Water Temperature Control Valves are specifically designed for mixing hot and cold water on hot water supply systems. They can be used for a variety of applications to reduce the temperature of the hot water from the system, and are ideal for radiant heat applications. This series features a "double throttling" design which combines the control of the hot and cold water to provide a sensitive response to changes in water temperature passing through the mixing chamber. The LF1170 can be set to any temperature between 90°F and 160°F (60°F and 120°F for model LFL1170-M2) with flow rates as low as 0.5 gpm and as high as 23 gpm. The superior flow characteristics of this valve provide accurate temperature control to the requirements of ASSE 1017 across the rated flow range. These valves also provide additional safety as they restrict mixed water out to a drip upon loss of cold water supply to the valve. As an added feature, the LF1170, LFL1170 series incorporates integral check valves and filter washers in both the hot and cold water inlets to protect against cross flow. Available with threaded (-UT), solder (-US), PEX Quick-Connect (-QC) or CPVC connections. Maximum Pressure: 150psi (10 bar). Consisting of Lead Free* cast copper silicon alloy body construction.

Product Version: Revit MEP 2014

516 Downloads

Series FBV-4 & FBVS-4 2-Piece, Full Port, Brass Ball Valves are used in residential and commercial applications for a full range of liquids and gases. They feature a bottom-loaded blowout-proof stem, chrome plated brass ball, brass adapter, and steel handle. Seats, thrust washer, and adjustable stem packing seal are virgin PTFE. Model FBV-4 has threaded end connections and is NSF & CSA approved. Model FBVS-4 has solder end connections and is NSF approved. Pressure Rating for 1/4 in. ‒ 2 in. (8 ‒ 50mm) is 600psi WOG and 150psi WSP. 2 1/2 in. ‒ 3 in. (65‒80mm) is 400psi WOG and 125psi WSP.

Product Version: Revit MEP 2014

1084 Downloads

Series LFB6800 & LFB6801 3-Piece, Full Port, Lead Free* copper silicon alloy Ball Valves feature an in-line maintenance design that offers serviceability of all operating parts without disturbing the rigid pipeline system. Their full port orifice ensures maximum flow capacity. Durafill seats, and stainless steel ball and stem provide maximum safety and highest operating pressure and temperature limits. Lead Free* construction complies with Lead Free* installation requirements.

Product Version: Revit MEP 2014

188 Downloads

Series FD-300 epoxy coated cast iron area drain with anchor flange, weepholes, 7 in. (178mm) diameter adjustable top with heel proof ductile iron grate and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

56 Downloads

Series FD-310 epoxy coated cast iron heel proof area drain with anchor flange, weepholes, 7 in. (178mm) diameter fixed top with ductile iron grate, and no hub(standard) outlet.

No Rating

Product Version: Revit MEP 2014

37 Downloads

Series FD-320 epoxy coated cast iron area drain with anchorflange, body collar with weepholes, 8 in.(203mm) diameter adjustable top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

56 Downloads

Series FD-320-SET epoxy coated cast iron area drain with anchor flange, membrane clamp with weepholes, 8 in. (203mm) diameter adjustable top, loose set heel proof ductile iron grate supported by bucket, and no hub connection (standard).

No Rating

Product Version: Revit MEP 2014

55 Downloads

Series FD-320-Y epoxy coated cast iron area drain with anchorflange, weepholes, 8 in.(203mm) diameter fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

71 Downloads

Series FD-320-Y-SET epoxy coated cast iron area drain with anchor flange, membrane clamp with weepholes, 8 in. (203mm) diameter fixed top, loose set ductile iron grate supported by bucket, and no hub connection (standard).

No Rating

Product Version: Revit MEP 2014

86 Downloads

Series FD-1100-A epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable round heel proof stainless steel strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

53 Downloads

Series FD-1100-L epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable heavy duty square heel proof stainless steel strainer, and no hub (standard) outlet

No Rating

Product Version: Revit MEP 2014

44 Downloads

Series FD-1100-M epoxy coated cast iron floor drain with anchor flange, reversible clamping collar with primary and secondary weepholes, adjustable square stainless steel strainer, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

70 Downloads

Series FD-230-A epoxy coated cast iron floor drain/cleanout combination with anchor flange, integral trap, membrane clamp with weepholes, adjustable round heel proof nickel bronze strainer & cleanout top, removable plug, and no hub outlet.

No Rating

Product Version: Revit MEP 2014

97 Downloads

Series FD-330 epoxy coated cast iron area drain with anchor flange, body collar with weepholes, 8 in. x 8 in. (203 x 203mm) square adjustable top with heel proof ductile iron grate, no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

67 Downloads

Series FD-330-Y epoxy coated cast iron area drain with anchor flange, weepholes, 8 in. x 8 in. (203 x 203mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

120 Downloads

Series FD-330-Y epoxy coated cast iron area drain with anchor flange, weepholes, 8 in. x 8 in. (203 x 203mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

34 Downloads

Series FD-340 epoxy coated cast iron area drain with anchor flange, body collar with weepholes, 12-1/2 in.(318mm) diameter adjustable top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

34 Downloads

Series FD-340-SET epoxy coated cast iron area drain with anchor flange, membrane clamp with weepholes, 12-1/2 in. (318mm) diameter adjustable top, loose set heel proof ductile iron grate supported by bucket, and no hub connection (standard).

No Rating

Product Version: Revit MEP 2014

40 Downloads

Series FD-340-Y epoxy coated cast iron area drain with anchor flange, weepholes, 12-1/2 in(318 mm) diameter fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

46 Downloads

Series FD-340-Y-SET epoxy coated cast iron area drain with anchor flange, membrane clamp with weepholes, 12-1/2 in (318mm) diameter fixed top, loose set heel proof ductile iron grate supported by bucket, and no hub connection (standard).

No Rating

Product Version: Revit MEP 2014

47 Downloads

Series FD-360 epoxy coated cast iron area drain with anchor flange, body collar with weepholes, 15-1/2 in. (394mm) diameter adjustable top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

40 Downloads

Series FD-360-Y epoxy coated cast iron area drain with anchor flange, weepholes, 15-1/2 in (394mm) diameter fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

44 Downloads

Series FD-430 epoxy coated steel side outlet area drain with anchor flange, 12-3/4 in. x 12-3/4 in. (324 x 324mm) square epoxy coated heel proof ductile iron hinged grate, integral trap with cleanout plug, sediment bucket, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

391 Downloads

Series FD-450 epoxy coated cast iron area drain with anchor flange, body collar with weepholes, 15-5/8 in. x 15-5/8 in. (397 x 397mm) square adjustable top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

66 Downloads

Series FD-450-F epoxy coated cast iron area drain with anchor flange, weepholes, 15-5/8 in. x 15-5/8 in. (397mm x 397mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

67 Downloads

Series FD-460 epoxy coated cast iron area drain with anchor flange, weepholes, 12-3/4 in. x 12-3/4 in. (324 x 324mm) square adjustable top with heel proof ductile iron tractor grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

60 Downloads

Series FD-460-F epoxy coated cast iron area drain with anchor flange, weepholes, 12-3/4 in. x 12-3/4 in. (324 x 324mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

64 Downloads

Series FD-460-F epoxy coated cast iron area drain with anchor flange, weepholes, 12-3/4 in. x 12-3/4 in. (324 x 324mm) square fixed top with heel proof ductile iron grate, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

58 Downloads

Series FD-600 epoxy coated cast iron isolation drain with epoxy coated cast iron upper and lower bodies, reversible membrane clamps with primary and secondary weepholes, adjustable round heel proof nickel bronze strainer, neoprene movement compensator coupling, and no hub (standard) outlet.

No Rating

Product Version: Revit MEP 2014

54 Downloads